Hyundai 81320-2S000

Contents

Hyundai Tucson IX35 Front Door Lock Actuator User Manual

Models: 81320-2S000, 81310-2S000, 81320-2S010, 81320-2S020

1. Introduction

This manual provides essential information for the installation, operation, maintenance, and troubleshooting of your new front door lock actuator for the Hyundai Tucson IX35 (model years 2011-2015). The door lock actuator is a critical component of your vehicle's central locking system, responsible for locking and unlocking the doors electronically.

2. Setup and Installation

Proper installation is crucial for the correct function and longevity of the door lock actuator. Please read all instructions carefully before beginning.

2.1. Pre-Installation Checklist

  • Verify Compatibility: Ensure the part number (e.g., 81320-2S000, 81310-2S000) matches your vehicle's requirements.
  • Confirm Pin Configuration: Actuators come in different pin configurations (e.g., 4-pin, 6-pin). Visually inspect your existing actuator's connector to match.
  • Identify Position: Confirm if you need a Front Left or Front Right actuator.
Comparison of 6-pin and 4-pin connectors, and left front vs. right front door lock actuators.

Figure 1: Actuator types showing 6-pin and 4-pin connectors, and left front vs. right front units.

Right front door lock actuator with a 4-pin connector.

Figure 2: Example of a Right Front door lock actuator with a 4-pin connector.

2.2. General Installation Steps

Note: For detailed, step-by-step instructions, please refer to the official user manual PDF available for download from the product page or consult a professional automotive technician. Always disconnect the vehicle's battery before performing any electrical work.

  1. Safety First: Disconnect the negative terminal of your vehicle's battery to prevent electrical shorts.
  2. Access the Door Panel: Carefully remove the interior door panel. This usually involves removing screws hidden under trim pieces, door handles, and window switch panels.
  3. Remove Moisture Barrier: Peel back the plastic moisture barrier to expose the inner door components.
  4. Locate and Disconnect Old Actuator: Identify the existing door lock actuator. Disconnect its electrical connector and any attached cables (e.g., door handle cables, lock rod).
  5. Remove Old Actuator: Unbolt or unclip the old actuator from the door frame.
  6. Install New Actuator: Position the new actuator in place and secure it with bolts/clips. Reconnect all cables and the electrical connector. Ensure cables move freely and are not kinked.
  7. Test Functionality: Reconnect the battery and test the lock/unlock function using the key fob and interior door lock switch before reassembling the door panel.
  8. Reassemble: Reattach the moisture barrier and carefully reinstall the interior door panel, ensuring all clips and screws are properly secured.
General view of the door lock actuator with attached cables.

Figure 3: Door lock actuator with attached cables.

Side view of the door lock actuator showing its profile and cable routing.

Figure 4: Side view of the door lock actuator.

Close-up of the actuator body showing connection points for cables and wiring harness.

Figure 5: Close-up of actuator body and connections.

Close-up of the cable ends that connect to door handles and locking mechanisms.

Figure 6: Close-up of actuator cable ends.

Specific view of actuator part number 813202S000.

Figure 7: Actuator part number 813202S000.

Exploded view diagram of a car door assembly highlighting the location of the door lock actuator (parts 81310 and 81320).

Figure 8: Exploded view of door assembly showing actuator location (parts 81310, 81320).

3. Operating the Actuator

The door lock actuator is an integral part of your vehicle's central locking system. It operates automatically when you:

  • Press the lock or unlock button on your key fob.
  • Use the interior power door lock/unlock switch.
  • Manually lock or unlock the door with the key from the outside (which may trigger the central locking system depending on vehicle features).

The actuator converts electrical signals into mechanical movement to engage or disengage the door's locking mechanism.

4. Maintenance

Door lock actuators are generally maintenance-free components. However, to ensure optimal performance and longevity:

  • Keep Clean: Ensure the interior of the door cavity remains free from excessive dust, dirt, or moisture, which can interfere with mechanical parts.
  • Inspect Wiring: Periodically, if the door panel is removed for other reasons, inspect the wiring harness connected to the actuator for any signs of fraying, corrosion, or loose connections.
  • Avoid Force: Do not force the door lock mechanism if it feels stiff, as this can damage the actuator or associated linkages.

5. Troubleshooting

If you experience issues with your door locking system, consider the following common problems and solutions:

5.1. Door Not Locking/Unlocking

  • Check Fuses: A blown fuse in your vehicle's fuse box can prevent the actuator from receiving power. Consult your vehicle's owner's manual for fuse locations.
  • Electrical Connection: Ensure the electrical connector to the actuator is securely attached and free from corrosion.
  • Wiring Damage: Inspect the wiring leading to the actuator for any cuts, pinches, or breaks.
  • Actuator Failure: If power is reaching the actuator but it does not operate, the actuator itself may have failed and requires replacement.

5.2. Intermittent Operation

  • Loose Connection: A loose electrical connection can cause intermittent functionality.
  • Failing Actuator: An actuator that is beginning to fail may work sometimes and not others.

5.3. Unusual Noises

  • Mechanical Issue: Grinding, clicking, or buzzing noises from within the door when locking/unlocking may indicate a mechanical problem within the actuator or its linkages.

6. Specifications

FeatureDetail
CompatibilityHyundai Tucson IX35 (2011-2015)
OEM Part Numbers81320-2S000, 81310-2S000, 81320-2S010, 81320-2S020
Pin ConfigurationAvailable in 4-pin and 6-pin variants
PositionFront Left, Front Right
Item Height27 cm
Item Length22 cm
Item Width10 cm
Item Weight0.770 kg
OriginMainland China

7. User Tips

  • Double-Check Part Numbers: Always verify the exact part number and pin configuration (4-pin or 6-pin) of your existing actuator before purchasing to ensure perfect compatibility, especially for specific door positions like the right-hand door.
  • Battery Disconnection: For safety, always disconnect the vehicle's battery (negative terminal first) before attempting any electrical repairs or component replacements.
  • Professional Help: If you are unsure about any step of the installation process, it is recommended to seek assistance from a qualified automotive technician.

8. Compliance and Safety

⚠️ Disclaimer:

Lockpick devices and locksmithing devices can only be used for the purposes permissible under the applicable law and regulations. Misuse of the product for any illicit activities is strictly forbidden. Please comply with the applicable laws and regulations in your country/area.

9. Warranty and Support

For any questions regarding product functionality, installation, or potential defects, please contact the seller directly through the platform where the purchase was made. Specific warranty details may vary; please refer to the product listing or contact the seller for more information.

© 2023 Product Manual. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.