Debra ST-mini

Contents

Debra ST-mini Stereo UHF IEM Wireless In-Ear Monitor System User Manual

Model: ST-mini

1. Introduction

This manual provides detailed instructions for the safe and efficient use of your Debra ST-mini Stereo UHF IEM Wireless In-Ear Monitor System. This portable and practical mini wireless in-ear monitoring system is designed for outdoor performances and recording monitoring, offering good signal transmission distance and clear sound quality. It features a built-in lithium battery for extended use and manual frequency switching to avoid interference.

For a downloadable version of this manual, please refer to the official user manual (PDF).

Debra ST-mini Stereo UHF IEM Wireless In-Ear Monitor System components including transmitter, receiver, and earphones.
Figure 1: Debra ST-mini System Overview

Product Features

  • 2.4G Digital Signal Transmission: Offers a reliable transmission range of approximately 30-50 meters.
  • Multiple Frequency Switching: Features 11 selectable channels to prevent cross-frequency interference.
  • Built-in Lithium Battery: Provides 8-12 hours of continuous use on a full charge.
  • Compact and Lightweight: Each unit weighs approximately 55g for portability.
  • Multi-Receiver Support: One transmitter can connect to multiple receivers simultaneously, with no upper limit.
  • High-Quality Audio: Ensures clear sound transmission and high fidelity.

2. Package Contents

Please check the package for the following items:

  • ST-mini Transmitter (TX)
  • ST-mini Receiver (RX)
  • In-ear Earphones
  • Type-C Charging Cable
  • 3.5mm Transmission Cable
  • User Manual (this document)

3. Setup Guide

3.1 Charging the Device

Before first use, fully charge both the transmitter (TX) and receiver (RX) using the provided Type-C charging cable. A full charge typically provides 8-12 hours of operation.

Built-in lithium battery charging for TX and RX units.
Figure 2: Charging the ST-mini Units

3.2 Wearing the Receiver and Earphones

  1. Attach the receiver (RX) to your belt or clothing using the back clip.
  2. Carefully insert the in-ear earphones into your ears. Ensure a comfortable and secure fit for optimal sound isolation and quality.

Note: Headphones with a built-in microphone cannot be used with the receiver.

3.3 Connecting to an Audio Source

The transmitter (TX) can be connected to various audio equipment outputs using the 3.5mm transmission cable. This includes:

  • Audio Mixers
  • Sound Cards
  • Wireless Microphones
  • Power Amplifiers
  • Pre-stage Effectors

Connect one end of the 3.5mm transmission cable to the audio output/input port on the transmitter (TX) and the other end to the output of your audio source.

Diagram showing the ST-mini transmitter connected to various audio devices like a mixer, sound card, and wireless microphone.
Figure 3: Connecting the Transmitter to Audio Equipment

3.4 Connecting Earphones to Receiver

Plug your in-ear earphones into the earphone jack on the receiver (RX).

Video 1: ST-mini System Setup and Operation Demonstration. This video demonstrates the unboxing, charging, wearing, connection to a mixer, frequency pairing, volume adjustment, and mute function.

4. Operating Instructions

4.1 Power ON/OFF

Locate the ON/OFF switch on both the transmitter (TX) and receiver (RX) units. Press and hold to power on or off.

4.2 Frequency Pairing

For successful operation, ensure both the receiver and transmitter are tuned to the same frequency channel. The display on both units will show the current channel (e.g., CH08).

Image showing the frequency switching buttons on the ST-mini receiver.
Figure 4: Multiple Frequency Switching

4.3 Frequency Switching

The system supports 11 channels for frequency modulation. To switch channels, use the 'SET' button on the unit. This helps prevent cross-frequency interference in busy environments.

4.4 Adjusting Volume

Use the 'VOL+' and 'VOL-' buttons on the receiver (RX) to adjust the monitoring volume to your desired level.

4.5 Mute Function

Double-click the 'SET' button on the receiver (RX) to mute the audio. The screen will indicate when mute is active.

4.6 Multi-Receiver Operation

One transmitter (TX) can broadcast to multiple receivers (RX) simultaneously. Simply ensure all receivers are paired to the same frequency as the transmitter.

Diagram illustrating one transmitter broadcasting to multiple receivers.
Figure 5: One Transmitter, Multiple Receivers

5. Troubleshooting

  • Unsuccessful Connection or Crash: If the device fails to connect or crashes, please restart the unit.
  • Signal Interference: If you experience interference from other Wi-Fi systems or environmental factors, shorten the distance between the transmitter and the receiver.
  • Receiver Placement: Keep the receiver at least 3 meters away from other Wi-Fi transmitters to minimize interference.

6. Specifications

Feature Specification
Sampling Frequency 16Bit/48KHz
Wireless Technology Digital 2.4G
Delay Rate Stereo 15ms
Battery Life (Transmitter) 7-8 hours
Battery Life (Receiver) 10-12 hours
Frequency Response (TX) 20Hz-20KHz, 0dBV (1Vrms)
Frequency Response (RX) 20Hz-20KHz, +1.5dBV (1.2Vrms)
Noise Floor (TX) -85dBV
Noise Floor (RX) -89dBV (-94dBV after noise gate is turned on)
Transmission Range 30m (up to >50m in best open environment)
Voltage Range USB (5-20V DC)
Inbox Adaptor Yes
Power Source AC, DC
High-concerned chemical None
Certification CE, FCC, RoHS
Origin Mainland China
Type In-Ear Monitoring

7. Maintenance

To ensure the longevity and optimal performance of your ST-mini system, follow these maintenance guidelines:

  • Cleaning: Use a soft, dry cloth to clean the units. Avoid using harsh chemicals or abrasive materials.
  • Storage: Store the system in a cool, dry place away from direct sunlight and extreme temperatures.
  • Battery Care: Recharge the built-in lithium batteries regularly, even if not in frequent use, to maintain battery health. Avoid fully discharging the batteries for extended periods.
  • Moisture: Keep the devices away from water and high humidity.

8. User Tips

  • Pre-use Check: Always ensure both the transmitter and receiver are fully charged before any performance or recording session.
  • Environment Awareness: Before use, quickly scan for potential sources of interference (e.g., other wireless devices, Wi-Fi routers) in your environment and adjust the frequency channel if necessary.
  • Optimal Placement: For the best signal, try to maintain a clear line of sight between the transmitter and receiver, and keep them within the recommended operating range.
  • Volume Control: Start with a low volume setting on the receiver and gradually increase it to a comfortable listening level to prevent hearing damage.

9. Frequently Asked Questions (FAQ)

Q: What is the maximum transmission range of the ST-mini system?
A: The system has a transmission range of 30-50 meters, and can reach over 50 meters in optimal open environments.
Q: How long does the battery last?
A: The transmitter (TX) battery lasts 7-8 hours, and the receiver (RX) battery lasts 10-12 hours on a full charge.
Q: Can I connect multiple receivers to one transmitter?
A: Yes, one transmitter can connect to an unlimited number of receivers simultaneously, provided they are all on the same frequency channel.
Q: Can I use any earphones with the receiver?
A: You can use standard in-ear earphones. However, headphones with a built-in microphone are not compatible with the receiver's earphone jack.

10. Warranty and Support

For warranty information and technical support, please refer to the official Debra Professional Audio website or contact your authorized dealer. Keep your purchase receipt as proof of purchase.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.