1. Introduction
The AMTast AMT-300 is a versatile 4-in-1 soil survey instrument designed to help you monitor crucial soil conditions for healthy plant growth. This device accurately measures soil pH, humidity, temperature, and ambient light intensity, providing essential data for gardening, potted plants, greenhouses, and agricultural research.

This manual provides detailed instructions for the safe and effective use of your AMTast AMT-300 soil tester.
2. Safety Information
Warning: Please read the following safety information carefully before using the product to avoid equipment damage, personal injury, or property loss.
- Battery Safety: This product uses a 9V battery. Do not short-circuit, squeeze, or incinerate batteries. Dispose of waste batteries in accordance with local environmental regulations; do not mix with household garbage.
- Environmental Requirements: Do not place the product in high-temperature (>60°C, e.g., direct sunlight, near ovens), humid (rainy days, bathrooms), dusty, or strong magnetic field environments. This may cause malfunctions or performance degradation.
- Child Supervision: Children under 12 must be supervised by adults when using the product. Prevent accidental ingestion of small parts or contact with the probe.
- Prohibition of Modification: Do not disassemble, modify, or repair the product yourself. Disassembly will void the warranty.
- Abnormal Handling: If the product shows overheating, abnormal noise, peculiar odors, smoke, or electric leakage, immediately stop use, keep it away from flammables, and do not disassemble it yourself.
- General Safety: Strictly follow these safety norms to avoid personal injury and property loss. Do not overload or misuse the product. Do not use the product as a hammer or pry bar to avoid breakage.
3. Product Components
3.1. Package Contents
- 1 x AMTast AMT-300 4-in-1 Soil Tester
- 1 x Instruction Manual
- Note: 9V battery is NOT included and must be purchased separately.

3.2. Device Overview
The AMTast AMT-300 features an easy-to-read LCD display, control buttons, and a long probe for soil insertion.
- LCD Display: Shows readings for pH, humidity, temperature, and light intensity.
- ON Button: Powers the device on.
- °C/°F Button: Toggles temperature display between Celsius and Fahrenheit.
- OFF Button: Powers the device off.
- Light Sensor: Located at the top of the device.
- Soil Probe: Metal probe for insertion into soil.
4. Setup and Battery Installation
- Battery Requirement: Obtain one 9V battery (also known as a 'Krona' battery).
- Open Battery Compartment: Locate the battery cover on the back of the device and slide or unclip it to open.
- Insert Battery: Connect the 9V battery to the terminal inside the compartment, ensuring correct polarity (+ to + and - to -).
- Close Compartment: Replace the battery cover securely.
- Initial Test: Press the 'ON' button to power on the device. The display should light up.
5. Operating Instructions
The AMTast AMT-300 is designed for use directly in soil. Ensure the probe is clean before and after each use.
5.1. Basic Operation
- Power On/Off: Press the 'ON' button to power on. Press the 'OFF' button to power off.
- Temperature Unit: Press the '°C/°F' button to switch between Celsius and Fahrenheit temperature readings.
5.2. Taking Measurements
To get accurate readings, insert the metal probe into the soil up to the base of the plastic housing. Ensure the soil is moist enough for good contact with the probe.

5.2.1. Humidity Detection
- Insert the probe into the soil.
- The display will show the moisture level.
- Reading Guide:
- Red (1-3): Dry soil.
- Green (4-7): Suitable moisture.
- Blue (8-10): Wet soil.
- Adjust watering time according to the plant variety and current reading.
5.2.2. Illumination Detection
- Ensure the light sensor at the top of the device is exposed to the ambient light.
- The display will show the light intensity.
- Measurement Range: 0-2000 lumens.
- Interpretation: A larger value indicates stronger light.
- Light Scale:
- LOW- to LOW+: Dim Light
- NOR- to NOR+: Moderate Light
- HGH- to HGH+: Bright Light
- Decide whether to shade or move the plant according to its light requirements.
- Tip: Because indoor UV is weak, the device is more suitable for testing outdoor light.

5.2.3. PH Detection
- Insert the probe into the soil.
- The display will show the pH value.
- Interpretation:
- Value 7: Neutral pH.
- Smaller number (<7): Greater acidity (Acidic).
- Larger number (>7): Greater alkalinity (Alkaline).
- Adjust the soil pH according to the plant variety's needs.
- Tip: Since most soils have a stable pH of around 7, the pointer changes only slightly when testing pH. Please read the pH value carefully.
5.2.4. Temperature Detection
- The device automatically detects soil temperature when the probe is inserted.
- Use the '°C/°F' button to switch between Celsius and Fahrenheit.
6. Maintenance
6.1. Daily Maintenance
- Cleaning: After each use, wipe the metal probe with a dry, soft cloth. Avoid corrosive liquids (e.g., alcohol, disinfectant) to prevent damage to the casing or internal components. Do not immerse the main unit in water.
- Storage: Clean the product before long-term storage. Store in a dry, well-ventilated place, away from direct sunlight, extreme temperatures, and humidity. Avoid extrusion or impact.
- Inspection: Regularly check the probe for any damage. Stop use immediately if damage is found.
6.2. Battery Replacement
When the display becomes dim or the device stops responding, it's time to replace the 9V battery. Follow the battery installation steps in Section 4.
7. Troubleshooting
- Device does not turn on:
- Check if the 9V battery is correctly installed.
- Replace with a new 9V battery.
- Inaccurate readings:
- Ensure the probe is clean and free of soil residue.
- Make sure the probe is fully inserted into the soil for good contact.
- Ensure the soil is adequately moist for conductivity (especially for pH and humidity).
- For light readings, ensure the sensor is not obstructed.
- pH reading does not change much:
- This is normal for many soils as pH tends to be stable around 7. Read carefully.
8. Specifications
| Feature | Detail |
|---|---|
| Model | AMT-300 |
| Functions | pH, Humidity, Temperature, Light Intensity |
| Power Source | 1 x 9V Battery (not included) |
| Light Intensity Range | 0-2000 Lumens |
| Temperature Units | °C / °F Switchable |
| Product Dimensions (Approx.) | Length: 33 cm, Width: 7 cm, Height: 4 cm |
| Product Weight (Approx.) | 0.128 kg |
9. User Tips
- Soil Only: This device is designed to measure conditions in soil. It will not provide accurate readings for air pH or humidity.
- Battery Ready: Always have a spare 9V battery on hand, as one is not included with the device.
- Accuracy: Users have found this tester to be accurate, even when compared to more expensive models, making it suitable for monitoring fussy plants.
- Versatile Use: Works effectively in both large and small pots.
- Outdoor Light: For best results when measuring light intensity, use the device outdoors as indoor UV levels can be too weak for accurate readings.
10. Warranty and Support
10.1. Disclaimer
- The manufacturer is not liable for product malfunctions caused by force majeure (e.g., earthquakes, fires, natural disasters), improper use, overload, third-party damage, or cross-border transportation accidents.
- Warranty is void if the product is disassembled, modified, repaired with non-original parts, or improperly repaired—no liability is assumed for resulting damage.
- This manual provides installation, operation, and maintenance guidance. Product parameters and functions may change with version updates—please refer to the actual product.
10.2. Support
For further assistance or inquiries, please contact your retailer or the point of purchase.