1. Introduction
Thank you for purchasing the WDXSKY RF40H Handheld Game Console. This device combines classic retrogaming with modern features, offering a portable entertainment experience. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your console to ensure optimal performance and enjoyment.
2. Safety Information
- Do not expose the device to extreme temperatures, direct sunlight, or high humidity.
- Avoid dropping or subjecting the device to strong impacts.
- Keep the device away from water and other liquids.
- Use only the provided or recommended charging cable and a compatible power adapter (max 5V/2A).
- Do not attempt to disassemble or repair the device yourself, as this will void the warranty and may cause damage.
- Keep out of reach of small children due to small parts.
3. Package Contents
Please check the package for the following items:
- RF40H Handheld Game Console
- USB-C Charging Cable
- Screen Protector
- Protective Case
- User Manual (this document and a PDF version)
4. Product Overview
The RF40H features a compact design with a 4.0-inch IPS screen, dual joysticks, a D-pad, and classic gaming buttons. It runs on an open-source Linux system and supports a wide range of emulators.
Controls and Ports:
- D-Pad: Directional input.
- A/B/X/Y Buttons: Action buttons.
- Start/Select Buttons: Game and system functions.
- Analog Joysticks: Dual joysticks with ambient light (Dazzle Glow Mode).
- L1/L2/R1/R2 Buttons: Shoulder buttons.
- USB-C Port: For charging.
- Headphone Jack: For audio output.
- Volume Buttons: Adjust audio level.
5. Setup
5.1 Charging the Console
- Connect the USB-C charging cable to the console's USB-C port and a compatible 5V/1.5A or 5V/2A power adapter.
- The red light on the console indicates that it is charging.
- Once fully charged, the red light will automatically turn off.
- Note: Do not press the reset button during charging. Ensure the charger output does not exceed 5V/2A.
5.2 Power On/Off
- Power On: Press and hold the power button for 5 seconds. Wait approximately 20 seconds for the operation interface to load.
- Power Off: Press and hold the power button for 7 seconds to display the power-off menu. Press the 'A' button to confirm and turn off the device.
- Important: Always exit any running games before shutting down. Do not press any buttons during system startup.
5.3 Joystick Light Settings
To adjust the joystick ambient light:
- Press the START button to enter the main menu.
- Navigate to and select LEDS SETTINGS using the 'A' button.
- Adjust settings as desired.
5.4 Wi-Fi Connection
To connect to a Wi-Fi network:
- From the main interface, press the START button to enter the settings menu.
- Find and select Network Settings.
- Choose your desired Wi-Fi network and enter the password to connect.
6. Operating Instructions
6.1 Game Play Controls
- PSP Games:
- PSP Menu: Press SELECT + B.
- PSP Save Game: From PSP menu (SELECT+B), select 1. settings > 2. system > 3. Auto loadsavestate > 4. slot 1 > 5. Back > 6. save state. Then 7. Exit to menu.
- NDS Games:
- Switch Screen Orientation: Press R2 to switch between vertical and horizontal screen display.
- Full-Screen Switch: Press L2.
- Stylus Function: Use the right joystick.
- Game Background Menu: Use the left joystick.
6.2 In-Game Shortcut Combinations (Excluding PSP and NDS)
- Save Game Progress: SELECT + R1
- Load Saved Game Progress: SELECT + L1
- Exit the Game: (SELECT + START) * 2
- Display FPS: SELECT + B
- Pause the Game: SELECT + A
- RA Menu: SELECT + X
- Game Acceleration (Toggle): SELECT + R2
- Game Screenshot: SELECT + Y
6.3 Wi-Fi Online Battle Setup
This feature requires the game to support two-player or multi-player battle mode, and all devices must be connected to the same Wi-Fi network.
First Game Console (Host) Setup:
- On the main interface, press START to enter the settings menu.
- Go to Network Settings and connect to an available Wi-Fi network.
- Record the console's IP Address for later use.
- Open a game that supports multiplayer. Enter the game interface.
- Press SELECT + X to access the settings menu, then press B.
- Find the "Host" option and start the network game.
Second Game Console (Client) Setup:
- On the main interface, press START to enter the settings menu.
- Go to Network Settings and connect to the same Wi-Fi network as the host.
- Open the same multiplayer game. Enter the game interface.
- Press SELECT + X to access the settings menu, then press B.
- Find the "Connect to Netplay Host" option.
- Enter the IP address of the first console (host) and press X to join the game.
- If both consoles display the same screen, the connection is successful. Select the multiplayer mode to start the game.
6.4 Switching Emulator Cores
If a game fails to run, it might be due to an unsupported emulator core. To change the core:
- In the game list, select the problematic game.
- Hold down the A button for two seconds to open a menu.
- Select "Advanced Game Options" (second-to-last item).
- Change the "Emulator" option to a different core.
Core Selection Suggestions:
- CPS1, 2, 3: Prioritize FBAlpha2012, then FBNeo, and other FBA cores.
- FBNeo: Prioritize FBNeo, then FBAlpha2012 and other FBA cores.
- MAME: Prioritize FBNeo, then MAME2010, and other cores.
- GBA: MGBA supports shortcut combinations; GPSP supports game modification.
6.5 Global, Emulator, and Single Game Settings
The console offers three levels of settings, with individual game settings taking precedence over emulator settings, which in turn take precedence over global settings:
- Global Settings: Found in the "Game Settings" section of the ES menu.
- Emulator Settings: Found under "Game Settings > PERSYSTEMADVANCED CONFIGURATION" for specific emulator models.
- Individual Game Settings: Hold the 'A' button on a game name and set in the "Advanced Game Options."
6.6 Changing the Theme
- Press START to open the selection menu.
- Select User Interface Settings.
- Press A to enter the settings and switch to your preferred theme under Background Theme.
6.7 Adjusting Game Display Aspect Ratio
- Press START to open the selection menu.
- Select Game Settings.
- Press A to enter the settings, then scroll down to select the desired Screen Aspect Ratio.
Notes:
- For a 720x720 resolution screen, a 1:1 aspect ratio is ideal.
- CORE PROVIDEO: This setting ensures the game screen is displayed according to its original ratio without distortion. It is recommended for arcade vertical shooting games.
- Avoid using X/Y full screen for GB and GBC games, as it may cause distortion.
6.8 Adding Games to Favorites
- In the game list, select the game you wish to add.
- Hold down the A button to open a menu.
- Select Add to Favorites and press A to confirm. The game will be added to your favorites list.
6.9 Adjusting Screen Brightness
- Press START to open the selection menu.
- Select System Settings.
- Press A to enter the System Settings menu.
- Select Brightness. Use the left key of the D-pad to decrease brightness, and the right key to increase brightness.
6.10 Language Conversion
- Press START to open the selection menu.
- Select System Settings.
- Select Language and press A to enter the language selection.
- Choose your desired language and press A to confirm.
- A restart is required for the language change to take effect. Return to the previous menu, select the exit option, and restart.
6.11 Unlocking Child Mode
To unlock Child Mode:
- Press the START key.
- Select UNLOCK USER INTERFACE MODE.
- Press A, then enter the sequence AAABA to unlock.
7. Maintenance
- Cleaning: Use a soft, dry cloth to clean the console. Do not use liquid cleaners or aerosols.
- Storage: Store the console in a cool, dry place when not in use. Avoid extreme temperatures.
- Screen Care: Use the provided screen protector to prevent scratches. Clean the screen gently with a microfiber cloth.
- Battery Care: To prolong battery life, avoid fully discharging the battery frequently. Charge the device regularly, even if not in use for extended periods.
8. Troubleshooting
- Console does not power on:
- Ensure the battery is charged. Press and hold the power button for 5 seconds. If still unresponsive, try charging for at least 30 minutes.
- Game does not load or crashes:
- Try switching the emulator core as described in Section 6.4. Ensure the game ROM is not corrupted. If the issue persists across multiple games, there might be a system issue.
- Wi-Fi connection issues:
- Ensure your Wi-Fi network is active and you have entered the correct password. Try restarting the console and your Wi-Fi router. Check if other devices can connect to the same network.
- Screen distortion or incorrect aspect ratio:
- Adjust the game display aspect ratio as described in Section 6.7. For specific emulators like GB/GBC, avoid X/Y full screen settings.
- System bugs:
- A shortcut combination to fix system bugs is L1+L2+R1+R2+(SELECT*3). Use this if you encounter unexpected system behavior.
9. Specifications
| Feature | Specification |
|---|---|
| Display Size | 4.0 inches IPS |
| Screen Resolution | 720*720 |
| Operating System | Open Source Linux |
| Battery Capacity | 4000mAh (6-8 hours playback) |
| Charging Interface | Type-C (Max 5V 1.5A or 2A) |
| Games Included | 18000+ (64G version), 22000+ (128G version) |
| Emulators Supported | 30+ (e.g., MAME, N64, PS1, NDS, GBA, FC, SFC, MD, CPS1/2/3, PSP) |
| Connectivity | Wi-Fi |
| Special Features | Vibration Motor, Dazzle Glow Mode (ambient light) |
| Supported Languages | Ukrainian, Japanese, French, German, Italian, Spanish, Portuguese, Russian, English, Swedish, Polish, Greek, Turkish, Korean, Dutch, Latin American Spanish, Brazilian Portuguese, Simplified Chinese, Traditional Chinese Style |
| Certifications | CE, RoHS, FCC |
| Package Dimensions | 17cm (L) x 5cm (W) x 12cm (H) |
| Package Weight | 0.37 kg |
10. User Tips
- For optimal performance, ensure your console's software is up to date.
- Experiment with different emulator cores for games that don't run smoothly.
- Utilize the save state feature frequently to avoid losing game progress.
- When playing multiplayer via Wi-Fi, ensure both consoles are on the same network and the host's IP address is correctly entered.
11. Warranty and Support
For warranty information and technical support, please refer to the seller or manufacturer's official channels. A PDF version of the user manual is available for download at this link.