FREDORCH FR2 Sex Machine User Manual

1. Important Safety Information

Read all safety warnings and instructions carefully before using this product. Failure to follow the warnings and instructions may result in injury.

• DO NOT use this product if you suffer from gynecological diseases, heart problems, or any physical or mental condition that renders you unable to withstand strong stimulation without first consulting with your doctor.
• Stop use if you experience any discomfort. For best results, apply a personal lubricant (not included) as needed.
• ONLY use this product with a stable, compatible power source.
• ALWAYS use this product on stable, level, and clean surfaces.
• DO NOT use this product if it is damaged or shows signs of malfunction. Repair or replace worn or broken parts before further use.
• DO NOT leave this product unattended during use.
• DO NOT get this product wet or operate it with wet hands.
• ALWAYS disconnect this product from its power source before cleaning, servicing, and storage.

2. Product Overview

The FREDORCH FR2 is an 80W sex machine designed for personal use, featuring adjustable stroke length and speed, controlled via a wireless remote. It utilizes an anti-rotation system for enhanced stability.

Figure 1: FREDORCH FR2 Sex Machine with included accessories (main unit, power adapter, wireless remote, various attachments).

3. Setup Instructions

3.1 Assembling the Main Unit

1. Unpack all components: main machine body, two T-shaped support brackets, power adapter, power cord, wireless remote control, and any included attachments.
2. Attach the two T-shaped support brackets to the main machine body. Ensure they are securely fastened to provide a stable base.

Figure 2: The machine utilizes two T-shaped brackets for enhanced stability. Thrust depth is adjustable from 3cm to 9cm (1.18"-3.54").

3.2 Power Connection

1. Connect the two halves of the power cord (if separate).
2. Connect the power adapter to the power inlet on the main machine body.
3. Plug the power cord into a compatible grounded power source (100-240V~50/60Hz). Do not use 3-to-2 prong adapters or ungrounded power strips.

3.3 Attaching Accessories

The machine features an anti-rotation interface for secure attachment of accessories.

1. Select your desired attachment.
2. Align the attachment's connector with the machine's anti-rotation connector.
3. Push and twist (if necessary) to securely lock the attachment in place. The decagon connectors prevent rotation for a more stable experience.

Figure 3: The anti-rotation interface ensures a stable and fast connection for accessories.

Figure 4: Revolutionary decagon connectors provide an anti-rotation lock, offering superior stability compared to quick air connectors.

3.4 Adjusting Angle and Height

1. While holding the machine's main body with one hand, loosen the vertical clamps of the joints by pulling their levers open.
2. Raise or lower the main body until your desired height is reached.
3. Lock the main body by pushing the levers closed.

3.5 Adjusting Thrusting Length

1. Loosen the knob in the connecting rod by turning it counterclockwise.
2. Slide the knob and rod forward or backward until you reach your desired thrusting length (3cm-9cm).
3. Retighten the knob by turning it completely clockwise.

4. Operating Instructions

4.1 Using the Wireless Remote Control

The FR2 machine is controlled by a wireless remote, offering 20 different classic modes.

• Modes Key: Press to cycle through the 20 available thrusting modes.
• Speed Key-Slow: Decrease the thrusting speed.
• Speed Key-up: Increase the thrusting speed.
• Pause Key: Pause or resume operation.

4.2 Operation Steps

1. Ensure the machine is connected to a grounded outlet.
2. Using the remote control, press the 'Modes Key' to select your desired thrusting mode (from 1 to 20).
3. Press the 'Pause Key' (or equivalent play button) to start the machine.
4. Adjust speed using 'Speed Key-Slow' or 'Speed Key-up' as desired.
5. To change the height, angle, or thrusting length during operation, pause the machine first, make adjustments, and then resume.
6. Once finished, press the 'Pause Key' to stop the machine, then disconnect it from its power source.

5. Maintenance

1. Always unplug your machine after each use and prior to any cleaning or maintenance.
2. Clean the exterior of your machine after each use with a soft, damp cloth.
3. For attachments (e.g., dildos), unscrew them from your machine, rinse with clean water or mild detergent, and air dry in a well-ventilated place away from direct sunlight.
4. Do not rinse the main unit or use abrasive cleaners or caustic chemicals on any part of the machine.
5. Allow all parts to dry completely before further use or storage.

6. Troubleshooting

If the machine does not operate as expected, please check the following:

• Ensure the power cord is securely connected to both the machine and the power outlet.
• Verify that the power outlet is functional.
• Check the remote control batteries (23A 12V) and replace if necessary.
• Ensure no attachments are obstructing the machine's movement.

If problems persist, please contact customer support.

7. Specifications

Figure 5: Dimensions of various compatible attachments.

8. Warranty and Support

For warranty information, technical support, or service inquiries, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase.