1. Introduction
Thank you for choosing the Tuya Smart WiFi Solar Sprinkler Water Timer. This device is designed to automate your garden irrigation, offering dual-zone control, solar charging, and smart app integration. Please read this manual carefully before use to ensure proper operation and longevity of your device.

Figure 1: Key features of the Smart Water Timer, including Dual Zone Control, Solar Powered, Water Saving, Low Power Alert, Irrigation Scheduling, and Multiple Watering options. Compatible with Smart Life, Tuya, Alexa, and Google Home.
2. Important Safety Information
- For outdoor use only. Install in a location with good sunlight for optimal solar charging.
- Tighten all connectors by hand only. Using tools may cause cracks or water leaks.
- Remove the device from the faucet during freezing weather. Freezing temperatures may cause permanent damage.
- Clean and check the filter gasket before use. Replace if dirty or damaged to prevent blockage or leakage.
- Use cold water only for irrigation.
- During low-sunlight seasons or extended cloudy periods, use USB charging to ensure sufficient power.
3. Package Contents
Please check the box for the following items:
- Smart Water Timer Unit
- User Manual
- Sealing Washer
- PTFE Tape
- 1/2" Adapter (Optional)
- Quick Connector (x2)
- USB Cable

Figure 2: US Standard package contents, including the main unit, manual, sealing washer, PTFE tape, 1/2" adapter, two quick connectors, and a USB cable.
4. Product Overview
This smart dual-outlet Wi-Fi watering timer features a built-in solar panel and USB charging. It includes a flow meter for accurate water usage. Each outlet (Zone A and Zone B) can be programmed independently with different watering schedules, durations, and modes.
4.1. Indicator Light Description
| Color | Device Status |
|---|---|
| Green (3s) | Start watering (corresponding zone) |
| Green Flashing | Watering in progress (corresponding zone) / Disable child lock |
| Red (3s) | Stop watering (corresponding zone) |
| Both LEDs Red (Flashing 3s) | Child Lock Enabled |
| Both LEDs Red (Solid) | Critical Battery Alert |
| Both LEDs Green/Red (Alternating) | Entering Network Configuration Status |
| Both LEDs Green/Red (Alternating) Green (3s) | Network Connection Successful |
| Both LEDs Green/Red (Alternating) Red (3s) | Network Connection Failed |
| Both LEDs Yellow (Solid) | Charging |
| Red/Green (Alternating 3s) | Restore Factory Settings |
5. Setup
5.1. Physical Installation
- Screw the water timer onto your outdoor faucet (3/4" tap). Ensure the connection is hand-tightened.
- Connect your garden hose to the desired outlet(s) (Zone A and/or Zone B) using the quick connectors.
- Position the solar panel for maximum sunlight exposure. The panel can be adjusted up to 135 degrees.

Figure 3: The water timer is powered by solar energy with a free-angle adjustable panel (max 135 degrees) and includes a USB-C port for backup charging.
5.2. Power Supply
The device is primarily powered by its built-in rechargeable battery, which is charged via the integrated solar panel. For initial setup or during prolonged low-sunlight periods, you can charge the device using the USB-C port.
5.3. Wi-Fi Setup Mode
To enter Wi-Fi setup mode:
- Press and hold the Zone B button for about 3 seconds.
- When both indicator lights begin to flash green and red alternately, release the button. The device is now in Wi-Fi setup mode.
5.4. Download the Smart Life App
Scan the QR code below or search for