Road Top Wireless CarPlay for BMW i3 I01 NBT EVO

Contents

RoadTop Wireless CarPlay & Android Auto Interface for BMW i3 (I01)

User Manual for NBT/EVO Systems (2013-2020)

Introduction

This manual provides detailed instructions for the installation, connection, and operation of your RoadTop Wireless CarPlay and Android Auto interface for BMW i3 I01 vehicles equipped with NBT or EVO systems from 2013 to 2020. Please read this manual thoroughly before installation and use to ensure proper functionality and to maximize your experience.

6 Major Advantages of the RoadTop CarPlay Interface

Figure 1: Key features include Dual System Interchange, HD Function Support, YouTube Function Support, CarPlay with 'Hey, Siri', Mobile Music Play, and Precise Online Navigation.

Compatibility

This device is compatible with BMW i3 I01 models from 2013 to 2020, supporting both NBT and EVO systems. Please verify your car's system type and screen size before proceeding with installation.

Compatible Model List for BMW i3 NBT and EVO systems

Figure 2: Compatible Model List showing NBT and EVO systems for i3 I01, years 2013-2017 (NBT) and 2017-2020 (EVO), and supported screen sizes (6.5" / 8.8" / 10.25"). Images also show the 6 PIN connector and examples of NBT and EVO system interfaces.

Package Contents

Ensure all the following accessories are included in your package:

Product Accessories List

Figure 3: Product Accessories List including Power cable, LVDS cable, RCA/USB cable, Wi-Fi antenna, Mic extension cable, USB adapter or Bluetooth transmitter (Note: Random package), NBT System box, and EVO System box.

Setup

1. Switching Between OEM and CarPlay System

After cable connection, you can switch between the original OEM system and the CarPlay system by long pressing a specific button on your car's knob, iDrive, or Touchpad. Refer to the table below for your specific car model:

Car Model System Switch Button
For BMW Long press 3 seconds "MENU" button from iDrive
For Mercedes NTG4.5/4.7 Long press 3 seconds "C" button from console joystick
For Mercedes NTG5.0 (A-Class, B-Class, CLA,GLA) Long press 3 seconds "C" button from console joystick
For Mercedes NTG5.0 (GLC& C-Class W205) Long press "" button for 3 seconds from center console handwriting mouse
For Audi Long press 3 seconds "Media" or "NAV" button from MMI control or steering wheel control
For Lexus Long press 3 seconds "MENU" button from knob control
For Lexus with touchpad Long press the touchpad 3 seconds
For other cars For the system switching button, please view the Cable Connection User Manual for detail.

The CarPlay Decoder main interface will display the available functions:

CarPlay Decoder Main Interface showing icons for CarPlay, Airplay, Android Auto, Autolink, USB, Youtube, Camera, Music.

Figure 4: CarPlay Decoder Main Interface.

2. WiFi Antenna and WiFi Channel Setting

Before using CarPlay and Android Auto functions, ensure the WiFi antenna is properly connected. Avoid placing the WiFi antenna close to metal objects, as this can degrade the WiFi signal.

Diagram of USB-AV cable and WiFi Antenna connection

Figure 5: USB-AV cable and WiFi Antenna connection diagram.

To set the WiFi Channel:

  1. From the CarPlay Decoder main interface, click the "Setup" button.
  2. Navigate to the WiFi settings.
  3. Set the WiFi Channel according to your country.
Country/Region WiFi Channel
United States 6
Europe and other countries 36
China 149

Note: When changing the WiFi channel, you need to reboot the CarPlay decoder box.

3. Wireless CarPlay Connection

If your phone has previously connected to AirPlay/Android Auto/Autolink, set CarPlay as the priority application.

  1. Click the CarPlay function icon on the decoder interface.
  2. Click "OK" to turn off any other active applications.
  3. Turn on your phone's WiFi.
  4. Turn on your phone's Bluetooth, search for and pair with the decoder box Bluetooth (name: CAR******).
  5. Allow CarPlay to sync with your phone when prompted.
  6. Choose "Use CarPlay" on your phone when prompted.

Video 1: Demonstrates the 4 steps to connect wireless CarPlay: Turn on WiFi, Turn on Bluetooth, Pair Bluetooth and allow, Choose "Use CarPlay".

4. Wired CarPlay Connection

Connect your phone to the CarPlay decoder using a USB cable.

5. Android Auto Connection

Before connecting, ensure your phone has the Android Auto software installed. If other applications like AirPlay/CarPlay/Autolink are active, set Android Auto as the priority application.

  1. Click the Android Auto function icon on the decoder interface.
  2. Click "OK" to turn off any other active applications.
  3. Turn on your phone's WiFi.
  4. Turn on your phone's Bluetooth, search for and pair with the decoder box Bluetooth (name: CAR******).
  5. Start using Android Auto.

6. Wired Android Auto Connection

Connect your phone to the CarPlay decoder using a USB cable.

7. AirPlay Connection

If your phone has previously connected to Android Auto/CarPlay/Autolink, set AirPlay as the priority application.

  1. Click the AirPlay function icon on the decoder interface.
  2. Click "OK" to turn off any other active applications.
  3. Turn on your mobile phone's WiFi and connect to the decoder box WiFi. The WiFi name is Car****** and the password is 88888888.
  4. In your iPhone's menu, click the AirPlay option to start mirroring.

Before connecting, ensure your phone has the Autolink software installed. If other applications like AirPlay/CarPlay/Android Auto are active, set Autolink as the priority application.

  1. Click the Autolink function icon on the decoder interface.
  2. Click "OK" to turn off any other active applications.
  3. Connect your phone to the CarPlay decoder using a USB cable.

Operating Instructions

Voice Assistant Function

The voice assistant allows you to control common functions using voice commands, eliminating the need for joystick control. For example, to return to the car's OEM system from the CarPlay interface, you can simply say "Hi Yo, return to car" instead of long-pressing the switch button.

Enabling Voice Assistant

  1. From the Setup menu, enter the "Voice Assistant" menu.
  2. Set "Assistant Enable" and "Voice Enable" to "on".

Using Voice Commands

The voice assistance uses two parts: an activation word and command words. The activation word is "Hi Yo".

Examples of use:

  • To return to the decoder interface from CarPlay: Say "Hi Yo, enter decoder."
  • To return to the car's OEM system from CarPlay: Say "Hi Yo, return to car."
  • To open CarPlay from the decoder main menu: Say "Hi Yo, open carplay."

You can view the available command words by entering the "Item List" within the Voice Assistant menu.

Learning Custom Command Words

You can set custom command words:

  1. Enter the "Voice Assistant" menu from the Setup menu.
  2. Click "Learn List" and follow the on-screen instructions to set your desired command words.
  3. Say the corresponding command word into the microphone, then repeat it. If successful, the new command word will replace the old one.

Maintenance

To ensure optimal performance and longevity of your RoadTop interface, keep the device and connections clean and free from dust. Avoid exposing the unit to extreme temperatures or moisture. No specific user-serviceable parts are inside the main unit.

Troubleshooting

  • No display or intermittent connection: Check all cable connections, especially the LVDS cable. Ensure the WiFi antenna is not near metal objects. Reboot the CarPlay decoder box after changing WiFi channels.
  • Wireless CarPlay/Android Auto not connecting: Verify that WiFi and Bluetooth are enabled on your phone and correctly paired with the decoder box. Ensure the correct application (CarPlay/Android Auto) is set as priority if multiple mirroring apps are installed.
  • Voice Assistant not responding: Check if "Assistant Enable" and "Voice Enable" are set to "on" in the Voice Assistant settings. Ensure you are using the correct activation word ("Hi Yo") and command words.
  • Regarding DIP Switch Settings: This manual does not detail specific DIP switch settings. The primary configuration for wireless connectivity is managed through the WiFi Channel settings within the device's menu. If you encounter issues related to initial setup or display, please refer to the 'Contact Us' section for support.

Specifications

Feature Detail
Operating System Linux
Display Size Supports 2.5" (and larger car screens like 6.5", 8.8", 10.25")
Is Touch Screen No (uses car's original controls)
Built-in Screen No
Din One Din
Voltage 12 V
Item Weight 1.2kg
Item Size 150*100*23 mm
Output Type Colored
Digital Media Format CD (likely refers to compatibility with car's existing CD player)
OSD Language Chinese (Simplified), Chinese (Traditional), Polish, French, Korean, Japanese, Turkish, Spanish, English
Certification CE

User Tips

  • Automatic Startup: The system is designed to start automatically when the car turns on, providing a seamless experience.
  • Rear View Camera Support: The interface supports the car's existing rear view camera, which will display as expected when engaging reverse gear.
  • Steering Wheel Control: You can navigate the CarPlay UI using your car's original steering wheel knob, enhancing convenience and safety.
  • Installation Time: Many users report that installation can be completed in approximately 1.5 hours, indicating a relatively straightforward process.

Warranty & Support

The RoadTop Wireless CarPlay & Android Auto Interface comes with a 1-year warranty.

For further assistance, troubleshooting, or to report any issues, please contact us via the purchase platform. To help us provide efficient support, please be prepared to provide the following information:

  1. Your order ID.
  2. Your car model.
  3. The year of your car.
  4. The screen size of your car.
  5. Details of your toggle switch setup (if applicable).
  6. Pictures of the LVDS cable connection.
  7. The software version of your CarPlay decoder (found in the CarPlay decoder menu: Setting > System Version).

A detailed user manual in PDF format is also available for download. You can find it under "Item guides & documents" on the product page or by accessing the following URL: RoadTop User Manual (PDF).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.