TECTINTER G6 Wireless Hall Effect Controller

Contents

TECTINTER G6 Wireless Hall Effect Controller User Manual

Model: G6

1. Introduction

Thank you for choosing the TECTINTER G6 Wireless Hall Effect Controller. This controller is designed to provide a superior gaming experience across multiple platforms with its advanced Hall Effect technology, precise motion sensing, and versatile connectivity options. Please read this manual carefully before use to ensure proper operation and maintenance.

Key Features:

  • Hall Effect Joysticks & Triggers: Drift-resistant and highly precise for enhanced control.
  • Multi-Platform Compatibility: Supports Nintendo Switch, Switch 2, PC, Android, iOS, PS3, and PS4.
  • 6-Axis Gyroscope: Provides accurate motion sensing for immersive gameplay.
  • Dual Vibration Motors: Offers realistic haptic feedback with 3 adjustable levels.
  • Programmable Buttons: Customize M1/M2 buttons for complex command sequences.
  • Turbo Function: Three adjustable rapid-fire speeds (8, 15, 25 shots/s).
  • 5 Mode Keys: Optimized modes for different devices (V3 MFI, M X-input, X S-Console, S 2.4G).
  • Long Battery Life: Built-in 400mAh battery for up to 20 hours of play.
  • Ergonomic Design: Comfortable anti-slip grip for extended gaming sessions.

2. Package Contents

Please check the package for the following items:

  • G6 Wireless Controller (Optional) x 1
  • Instruction Manual x 1
  • USB Data Cable (Type-C) x 1
  • 2.4G Wireless Receiver (Optional) x 1
Package Contents of TECTINTER G6 Controller

Figure 1: Package Contents - G6 Wireless Controller, Instruction Manual, USB Cable, and Receiver.

3. Setup and Charging

3.1 Charging the Controller

Before first use, it is recommended to fully charge the controller.

  1. Connect the supplied USB Type-C cable to the charging port on the top of the controller.
  2. Connect the other end of the USB cable to a USB power source (e.g., PC, USB wall adapter).
  3. The controller's indicator light will show charging status (specific behavior may vary, refer to the PDF manual for details).
  4. A full charge takes approximately 2.5 hours. The controller provides 8-20 hours of play time on a full charge.
Controller Battery and Charging Information

Figure 2: Battery capacity (400mAh), charge time (2.5H), and play time (8-20H).

3.2 Initial Power On

To turn on the controller, press the HOME button located in the center of the controller.

4. Operating Instructions

4.1 Connecting the Controller

The G6 controller supports multiple connection methods depending on your device. Ensure the mode switch on the back of the controller is set correctly.

Operating Instruction Table for various platforms

Figure 3: Connection methods and indicator lights for different systems.

Connection Guide
SystemGear/ModeOperationIndicatorConnection Method
AndroidX, M, V3Press & hold HOME for 3sBlue (X), Purple (M), Red (V3)Bluetooth
iOSX, M, V3Press & hold HOME for 3sBlue (X), Purple (M), Red (V3)Bluetooth
PS3/PS4/PS52.4GPress & hold HOME for 3sBlueReceiver
Switch/Switch2/OLED/LiteSPress & hold HOME for 3sGreenBluetooth
PC2.4G or BluetoothPress & hold HOME for 3sBlue (2.4G), Varies (BT)Receiver or Bluetooth

4.2 Wake Up Function

The controller features a wake-up function. Once paired, you can wake up the controller by pressing the HOME button. For Switch consoles, the controller can also wake up the console.

4.3 Mode Switching

The G6 controller has a dedicated mode switch on the back to select between 5 optimized modes:

  • V3 Mode (MFI): For specific iOS MFI games.
  • M Mode (X-input): Standard mode for PC and Android.
  • X Mode (X-input): Another X-input mode, typically for PC.
  • S Mode (S-Console): For Nintendo Switch consoles.
  • 2.4G Mode: For use with the 2.4G wireless receiver (PC, PS3, PS4, PS5).
5 Mode Keys on the G6 Controller

Figure 4: Mode switch with V3, M, X, S, and 2.4G options.

4.4 Vibration Adjustment

The controller features dual vibration motors with 3 adjustable levels:

  • Weak
  • Moderate
  • Strong

To adjust vibration intensity, press the vibration adjustment button (refer to the PDF manual for exact button location and sequence).

3 Levels Adjustable Vibration

Figure 5: Visual representation of Weak, Moderate, and Strong vibration levels.

4.5 Turbo Function

The Turbo function allows for rapid-fire input. You can assign any action button (A/B/X/Y/LB/RB/LT/RT) to Turbo mode with three adjustable speeds:

  • 8 shots/second
  • 15 shots/second
  • 25 shots/second

To activate/deactivate Turbo and adjust speed, refer to the detailed instructions in the PDF manual.

3 Levels Turbo Function

Figure 6: Turbo function with 25, 15, and 8 shots per second options.

4.6 Programmable Buttons (M1/M2)

The M1 and M2 buttons on the back of the controller can be programmed to record custom combo sequences.

  1. Press and hold the SELECT button.
  2. While holding SELECT, press the M1 or M2 button you wish to program.
  3. Input your desired sequence of button presses (e.g., A+B+X+Y).
  4. Release the SELECT button to save the sequence.
  5. Now, pressing M1 or M2 will execute the recorded sequence.
Programmable M1/M2 Buttons

Figure 7: Location of M1/M2 programmable buttons and example shortcut key programming.

4.7 6-Axis Gyroscope

The integrated 6-axis gyroscope provides precise motion sensing for games that utilize tilt and rotation controls. This enhances immersion in racing, flight simulators, and other motion-controlled games.

6-Axis Motion-Sensing Controller

Figure 8: The 6-Axis motion-sensing feature in action.

5. Maintenance

  • Cleaning: If the controller becomes stained, clean it with a damp soft cloth. Do not soak the controller in water or use harsh chemicals.
  • Storage: Store the controller in a cool, dry place away from direct sunlight and extreme temperatures.
  • Avoid Damage: Do not use sharp objects to scratch or pierce the controller. Keep it away from open flames and corrosive liquids.
  • Children: Keep the controller and small accessories away from children under 3 years old to avoid choking hazards.

6. Troubleshooting

  • Controller not connecting:
    • Ensure the controller is charged.
    • Verify the mode switch on the back of the controller is set to the correct platform.
    • Try re-pairing the controller with your device (e.g., delete existing Bluetooth pairing and pair again).
    • For 2.4G connection, ensure the receiver is properly plugged in and try a different USB port.
  • Input lag or disconnection:
    • Ensure there are no strong interferences (e.g., other wireless devices) nearby.
    • Move closer to your device.
    • For PC, using the 2.4G receiver often provides lower latency than Bluetooth.
  • Controller not recognized on PC:
    • When using the 2.4G receiver, the controller should typically appear as an 'Xbox 360 Controller'. Ensure your PC's drivers are up to date.
    • Try restarting your PC.
  • Joystick drift:
    • The Hall Effect joysticks are designed to minimize drift. If you experience drift, try restarting the controller and your device.
    • Refer to the PDF manual for any specific calibration procedures.
  • Buttons not responding:
    • Ensure the controller is properly connected.
    • Check if any buttons are physically stuck.

7. Specifications

FeatureDescription
ModelG6
BrandTECTINTER
ConnectivityBluetooth, 2.4G Wireless
Compatible PlatformsNintendo Switch, Switch 2, PC, Android, iOS, PS3, PS4, PS5
Battery Capacity400mAh
Charging PortUSB Type-C
Charge TimeApprox. 2.5 hours
Play Time8-20 hours (depending on usage)
Joystick TypeHall Effect
Trigger TypeHall-Linear
Motion Sensor6-Axis Gyroscope
VibrationDual Motors, 3 Adjustable Levels
Programmable ButtonsM1, M2
Turbo Function3 Speeds (8, 15, 25 shots/s)
MaterialHigh-quality ABS
Controller Dimensions15 cm (5.9 in) width x 11 cm (4.3 in) height
Receiver Dimensions4.3 cm (1.69 in) length x 2 cm (0.78 in) height
USB Cable Length1 m (39.37 in)
Dimensions of Controller, Receiver, and USB Cable

Figure 9: Physical dimensions of the G6 controller, receiver, and USB cable.

8. User Tips

  • Optimal Latency: For the lowest latency, especially on PC, use the 2.4G wireless receiver instead of Bluetooth.
  • PC Connection (2.4G): When connecting via the 2.4G dongle on PC, set the controller's mode switch to '2.4G'. Press and hold the HOME button until it flashes; it should connect and be recognized as an 'Xbox 360 Controller'.
  • Android TV Box: The controller can be left connected to an Android TV box and will automatically connect when powered on.

9. Warranty and Support

9.1 Warranty Information

  • Return Policy: Enjoy 7 days to return the product if there are any quality problems.
  • Warranty Period: All products come with a 3-month warranty from our store.

9.2 Customer Support

If you have any questions or encounter issues with your TECTINTER G6 controller, please contact customer support. All emails will be answered within 24 hours.

Warranty and Service Information

Figure 10: Summary of warranty and service terms.

9.3 Additional Resources

For more detailed instructions, troubleshooting, and warranty information, please refer to the comprehensive user manual available in PDF format: Download PDF User Manual.

10. Product Demonstration Video

Video 1: A brief demonstration of the TECTINTER G6 Wireless Hall Effect Controller's features and usage.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.