COOSPO HW9

Contents

COOSPO HW9 Heart Rate Sensor Armband User Manual

Model: HW9

1. Introduction

Thank you for choosing the COOSPO HW9 Heart Rate Sensor Armband. This manual provides essential information for the proper use, setup, and maintenance of your device. Please read it carefully before use to ensure optimal performance and longevity.

COOSPO HW9 Heart Rate Sensor Armband

The COOSPO HW9 Heart Rate Sensor Armband.

2. Package Contents

Ensure all items are present in your package:

  • Heart rate monitor with armband x1
  • Charging cable x1
  • User manual x1

3. Product Overview

Familiarize yourself with the components of your HW9 Heart Rate Sensor Armband:

Diagram showing LED, Power button, Optical sensor, and Charging terminal on the HW9 device.

Diagram of the HW9 sensor components and recommended wearing positions.

  1. LED Indicator
  2. Power On/Off Button
  3. Optical Sensor
  4. Charging Terminal

4. Setup and Wearing Instructions

Follow these steps to properly set up and wear your HW9 armband:

  1. Remove the transparent protective film from the back of the HW9 sensor (item ⑤ in the overview diagram).
  2. Wear the armband on your upper forearm or on the inner or outer side of your upper arm (position ③ in the overview diagram).
  3. Adjust the armband to a comfortable length, ensuring it fits snugly against your skin. A snug fit prevents the armband from slipping during intense exercise and ensures accurate heart rate monitoring.

Caution: Do not wear the armband on your wrist (position ④ in the overview diagram).

Images showing the HW9 armband being used for various exercises like running, cycling, fitness, and yoga.

The HW9 armband is suitable for various exercise types including running, cycling, fitness, and yoga.

5. Connecting to Devices

5.1. Connecting to a Sports & Fitness Application (Bluetooth)

  1. Turn on Bluetooth on your mobile phone.
  2. Open your preferred "Sports & Fitness" application (e.g., CoospoRide, Heartool).
  3. Navigate to the "Sensor Settings" menu within the application.
  4. For CoospoRide: Go to More > Sensors > Heart Rate.
  5. For Heartool: Go to Settings > Devices > Add Device.
  6. Locate the HW9 Bluetooth ID in the application and select it to connect.

Important: Do NOT pair the sensor directly in your phone's Bluetooth settings. Always connect through the application.

5.2. Connecting to Smart Devices (Bluetooth and ANT+)

The HW9 armband is compatible with various smart devices, including fitness equipment and sports watches that support Bluetooth and ANT+ connectivity.

  1. From your smart device's settings menu, select "Add Heart Rate Sensor" or a similar option.
  2. Find the HW9 Bluetooth or ANT+ ID and select it to establish a connection.

For detailed information on sensor compatibility and connection instructions, please refer to: www.coospo.com/faq/hw9

Compatibility chart for heart rate monitor armbands, listing compatible and incompatible models with the HW9.

Compatibility list for various heart rate monitor armbands.

6. Operation

6.1. Power On/Off

  • Power On: Short press the Power On/Off Button (②). The blue LED will flash quickly, and the device will vibrate.
  • Power Off: Long press the Power On/Off Button (②) for 2 seconds. The red LED will flash, and the device will vibrate.

6.2. Heart Rate Zone Indication

After powering on, the light blue LED (①) will flash, indicating that the device has not yet detected a heart rate. Once your heart rate is detected, the LED (①) will display your current heart rate zone according to the table below:

Heart Rate Zone* Intensity Breathing Light Color
Zone 1 (<60% MHR) Very Light Blue
Zone 2 (60%-70% MHR) Light Green
Zone 3 (70%-80% MHR) Moderate Yellow
Zone 4 (80%-90% MHR) Heavy Orange
Zone 5 (90%-100% MHR) Very Heavy Red

*Note: Heart rate zones are calculated based on your Maximum Heart Rate (MHR).

Maximum Heart Rate (MHR) Calculation: The recommended method is 220 minus your age. The default MHR value is 200 bpm, which can be adjusted within the CoospoRide or Heartool application settings.

6.3. Bluetooth Connection Status

When the device is working, you can short press the button to check its Bluetooth connection status:

  • Not Connected: Green LED flashes.
  • Connected: Blue LED flashes.

7. Low Battery Alert and Charging

7.1. Low Battery Alerts

  • When the battery level is below 10%, the red LED will flash slowly for 10 seconds, and this alert will repeat every 5 minutes.
  • When the battery level drops below 1%, the red LED will flash rapidly, the device will vibrate, and then automatically shut down.

7.2. Charging Instructions

  1. Connect the USB magnetic power cable to the charging terminal (⑤) on the device and then to a power source (e.g., DC 5V power adapter or computer USB port).
  2. During charging, the green LED will flash.
  3. Once charging is complete, the green LED will turn solid.

The typical charging time is approximately 1.5 hours.

Note: To extend battery life, always use a DC 5V power adapter or a computer USB port for charging.

8. Maintenance

To ensure the longevity and hygiene of your HW9 Heart Rate Sensor Armband, follow these maintenance guidelines:

  • The armband is made of soft and breathable nylon elastic braided tape, which is washable and reusable.
  • Regularly clean the armband with mild soap and water. Ensure it is completely dry before re-wearing or storing.
  • Wipe the sensor unit with a soft, damp cloth. Do not use abrasive cleaners or solvents.
  • Store the device in a cool, dry place when not in use.
Diagram illustrating the features of the armband: soft & breathable nylon, adjustable Velcro, and washable & reusable material.

Key features of the armband material: breathable, adjustable, and washable.

Image showing a woman exercising in the rain, highlighting the IP67 waterproof rating of the device.

The HW9 is IP67 waterproof, making it suitable for use in various conditions.

9. Troubleshooting

If you encounter issues with your HW9 Heart Rate Sensor Armband, try the following:

  • Device not powering on: Ensure the device is fully charged. Connect it to the charging cable and a power source.
  • No heart rate detected:
    • Ensure the armband is worn snugly on your upper forearm or upper arm, not too loose.
    • Check that the optical sensor is clean and free from obstructions.
    • Ensure the device is powered on and the light blue LED is flashing, indicating it's searching for a heart rate.
  • Cannot connect to app/device:
    • Make sure Bluetooth is enabled on your phone or smart device.
    • Ensure you are connecting through the app's sensor settings, not directly through the phone's Bluetooth settings.
    • Check the device's Bluetooth connection status (short press button: green LED for not connected, blue LED for connected).
    • Verify that your app or smart device is compatible with the HW9 (refer to compatibility list or coospo.com/faq/hw9).
  • Inaccurate readings:
    • Ensure the armband is worn correctly and securely.
    • Avoid excessive movement or vibrations that might interfere with the optical sensor.

If the product malfunctions and troubleshooting steps do not resolve the issue, please contact COOSPO support. The product must be returned to the manufacturer for any service or repair.

10. Specifications

Feature Specification
Weight 10.6 g (sensor only)
Battery Life 35 Hours
Wireless Transmission Bluetooth 5.0 & ANT+
Battery Type Rechargeable Lithium Battery
Operating Temperature 0°C~40°C (32°~104°F)
Charging Temperature 0°C~40°C (32°~104°F)
Dimensions 41.3 x 33.8 x 11 mm
Waterproof Rating IP67

11. User Tips

  • Regularly inspect the strap for wear and tear, especially after 2-3 years of use, to ensure continued performance and prevent unexpected breakage.
  • Ensure the armband is always clean for optimal sensor performance and hygiene.
  • For best results, ensure the armband is snug but not uncomfortably tight during exercise.

12. Warranty and Support

For support or inquiries, please contact COOSPO directly:

Disclaimer:

  • The information provided in this manual is for reference only. Due to ongoing research and development, the product described may change without prior notice.
  • We are not liable for any direct, indirect, incidental, or special damages, losses, or expenses arising from or related to this manual or the product described herein.
  • This product is intended for sports purposes only and cannot replace any medical equipment.

13. Safety and Disposal Information

13.1. Safety Warnings

  • Do not open or modify the product.
  • Do not disassemble or attempt to repair this product.
  • This product is safe under normal and reasonably foreseeable operating conditions.
  • If the product operates abnormally, please contact COOSPO support.
  • The product must be returned to the manufacturer for any service or repair.

13.2. Product Disposal

Waste electrical and electronic products should not be disposed of with household waste. Please recycle where facilities exist. Contact your local government or retailer for more information on recycling.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.