1. Overview
The DJI TB30 Intelligent Flight Battery is designed for the Matrice 30 Series drones, offering advanced features for reliable and efficient flight operations. It incorporates self-heating capabilities and supports a high number of charge/discharge cycles, making it suitable for demanding professional use.
Highlights
- Supports up to 400 charge/discharge cycles.
- Enables hot-swapping for uninterrupted workflow during critical tasks.
- Features self-heating capability for optimal performance in various temperatures.
2. Package Contents
Ensure all items are present upon unboxing:
- TB30 Intelligent Flight Battery x 1
3. Setup
Initial Charging
Before first use, fully charge the TB30 Intelligent Flight Battery using a compatible DJI charging hub or device. Refer to the charging device's manual for specific instructions.
Installation
To install the battery into your Matrice 30 Series drone:
- Ensure the drone is powered off.
- Align the battery with the battery compartment on the drone.
- Gently push the battery into the compartment until it clicks securely into place.
- Verify that the battery is firmly seated and cannot be easily dislodged.
4. Operating the Battery
Powering On/Off
Refer to your Matrice 30 Series drone's manual for specific instructions on powering the drone on and off with the installed battery.
Hot-Swapping
The TB30 battery supports hot-swapping, allowing for battery replacement without powering down the drone entirely. This feature is crucial for maintaining continuous operation during critical missions. Follow the drone's specific hot-swapping procedure to ensure safe and seamless battery exchange.
Battery Level Indicators
The battery features LED indicators to display the current charge level. Consult your drone's manual for interpretation of these indicators and their status during charging and discharge.
5. Maintenance and Storage
Battery Care
- Avoid exposing the battery to extreme temperatures, direct sunlight, or moisture.
- Do not puncture, drop, or disassemble the battery.
- Use only DJI-approved charging equipment.
Storage Guidelines
Important Note:
Storing the battery at a high charge level for extended periods can negatively affect its lifespan. For optimal battery health and longevity, please follow the usage guidelines provided for the BS30 Intelligent Battery Case, which typically recommends storing batteries at a partial charge (e.g., 50-60%) when not in use for prolonged periods.
6. Troubleshooting
If you encounter issues with your TB30 Intelligent Flight Battery, consider the following common solutions:
- Battery Not Charging: Ensure the charging cable and adapter are securely connected and functioning correctly. Check for any visible damage to the battery or charger.
- Shortened Flight Time: This could indicate battery degradation. Ensure proper storage and charging practices are followed. If the issue persists, the battery may need replacement.
- Battery Not Recognized by Drone: Re-install the battery, ensuring it is properly seated. Restart the drone. If the problem continues, consult the drone's manual or DJI support.
- Overheating During Charge/Discharge: Discontinue use immediately. Allow the battery to cool down in a well-ventilated area. If overheating is frequent, contact support.
For more complex issues, refer to the official DJI support resources or contact their customer service.
7. Specifications
| Feature | Detail |
|---|---|
| Model | TB30 |
| Battery Type | Li-ion |
| Capacity | 5880 mAh |
| Voltage | 26.1 V |
| Weight | Approx. 685 g |
| Operating Temperature | -20 °C to 50 °C |
| Charge/Discharge Cycles | Up to 400 |
| Compatible Drone Brand | DJI |
| Compatible Products | Matrice 30 Series |
| Origin | Mainland China |
8. User Tips
- Always ensure batteries are fully charged before critical missions to maximize flight time and operational reliability.
- When performing hot-swaps, ensure the drone's system indicates readiness for battery exchange to prevent power interruptions.
- Regularly inspect battery terminals for cleanliness and damage to ensure good electrical contact.
9. Warranty and Support
For warranty claims, technical support, or service inquiries, please contact the manufacturer or your point of purchase.
Manufacturer Information
Manufacturer: Shenzhen Huanrong Commercial Management Co., Ltd.
Address: Room 4030, Peanut U Valley (Office Building), No. 57, Guangda Road, Baoan Community, Yuanshan Street, Longgang District, Shenzhen, China
E-mail: securexhome@outlook.com
EU Representative
EU REP: ECLAT SOLUTION SARL
Address: Bureau 1145, 37 Passage du Ponceau, Paris 75002 France
E-mail: eclatsolution@outlook.com
Phone: +33 187652619
Please dispose of this product responsibly at designated collection points.
10. Disclaimer
⚠️ For recreation use only. Illegal modification of drones/planes is prohibited. Please also pay attention to the relevant laws and regulations on the use of drones/planes in your country/area to ensure legal use.