PortKeys LS7P

Contents

PortKeys LS7P 7-inch Wireless Camera Control Monitor

User Manual

1. Introduction

The PortKeys LS7P is a lightweight and rugged 7-inch on-camera monitor designed for professional filmmakers. It features powerful wireless camera control capabilities and is constructed entirely from aluminum to withstand challenging shooting environments.

This monitor boasts a 7-inch touchscreen panel with a 1920 x 1080 resolution, offering a maximum brightness of 1,000 nits and a 1000:1 contrast ratio. This ensures excellent visibility in various lighting conditions, from bright sunlight outdoors to dimly lit indoor studios. The 10-bit (8+2 FRC) panel is factory color-calibrated, providing accurate colors essential for critical on-set decisions.

Weighing only 409 grams (14.42 ounces) and measuring 176.2 x 103.8 x 39.3 mm (6.93 x 4.08 x 1.54 inches), the LS7P is a compact and comfortable tool for camera operators and focus pullers. It offers a wide viewing angle of 80° from all sides for easy monitoring.

PortKeys LS7P monitor mounted on a camera rig, displaying a scene.
Figure 1: PortKeys LS7P monitor in use on a camera rig.

2. What's in the Box

Your PortKeys LS7P package includes the following items:

  • PortKeys LS7P Monitor
  • Safety Box
  • 2.4GHz Straight Mini Antenna
  • Mini USB Stick
  • Screen Wipes
  • Screen Protectors (2x)
  • D-Tap to Locking 5.5mm DC Power Cable
Side profile of the PortKeys LS7P monitor, highlighting its slim design.
Figure 2: Side view of the LS7P monitor.

3. Setup

3.1 Powering the Monitor

The LS7P offers flexible power options:

  • NP-F Battery: Insert a single Sony NP-F battery into the dedicated battery plate on the back of the monitor. A fully charged Sony NP-F970 battery can power the monitor for up to 3.5 hours due to its low power draw of 13W.
  • DC Input: Connect an external power source (DC 7-24V) using the included D-TAP to locking DC 5.5x2.1mm barrel connector cable. This allows for extended usage with V-Mount or Gold Mount batteries.

3.2 Connecting Video Sources

The monitor features both HDMI and SDI connectivity:

  • HDMI: Use the 4K DCI 30P/1080P60 HDMI input port located on the bottom left side.
  • SDI: Use the 3G-SDI 1080P60 video input port on the right-hand side.

Cross-conversion from SDI input to HDMI output is supported, and the monitor can output 3D LUTs via HDMI.

Close-up of the PortKeys LS7P monitor's HDMI and SDI input/output ports.
Figure 3: HDMI and SDI ports on the LS7P monitor.

3.3 Audio Output

A 3.5mm headphone jack is located at the bottom of the monitor for audio monitoring.

3.4 Mounting the Monitor

The LS7P provides multiple 1/4″-20 mounting points with locating pins: one on the top, one on the bottom, and one on the right side, offering versatile mounting options for your camera rig.

3.5 Wireless Transmitter Plate Safety

Caution:

  • Do not expose the wireless transmitter plate when the monitor is powered on, or it will conduct electricity.
  • NPF-powered devices should be less than or equal to 10W.
  • The 1/4" yellow screw should be tightened.
Back of the PortKeys LS7P monitor with battery plate, SDI IN/OUT, DC 7-20V, and warning labels.
Figure 4: Back panel of the LS7P showing power and video connections, and safety warnings.

4. Operating the Monitor

4.1 Basic Controls

  • Power On/Off: Use the dedicated ON/OFF switch located on the top of the monitor.
  • Touchscreen Lock: A touchscreen lock switch is available on the top to prevent accidental touches during operation.
  • User-Assignable Buttons (F1-F4): Four customizable buttons on the top allow quick access to your favorite monitoring tools.
Top view of the PortKeys LS7P monitor, showing the F1-F4 function buttons and power switches.
Figure 5: Top controls of the LS7P monitor.

4.2 Professional Monitoring Tools

The LS7P runs on MOVNORM OS and includes a comprehensive suite of customizable monitoring tools:

  • 3D LUT Monitoring: Supports up to 20 custom LUTs, loadable via the USB-A port. Features 3D LUT output capabilities.
  • Anamorphic De-squeeze: 10 standard ratios (1.33x, 1.5x, 1.8x, 2.0x) and custom aspect ratios from 0.25x to 4.0x.
  • Freeze Frame: Capture a frame to a USB stick and compare it with the live image, useful for stop-motion.
  • Stretch Leg Tool: Stretch the bottom part of the image when shooting vertically; can be sent to HDMI output.
  • Focus Tools: Peaking, custom peaking frame, and zoom functions for precise focus.
  • Image Analysis & Exposure Tools: RGB and Luma Waveform, Vectorscope, Luma Histogram, Zebra, and customizable False Color (including ARRI False Color with 13 different colors).
  • Framing Tools: Crosshair, check field, guides, grids, rectangle crop.
  • Audio Meters: For monitoring audio levels.
  • Monitor Adjustments: Black level, backlight, contrast, color temperature, sharpness, chroma, brightness, tint, HDR/HLG, and image flip (H/V).
  • Log Stops Exposure Tool: A unique tool that automatically identifies the camera’s LOG signal (currently supports Sony, with other brands coming via firmware updates) and divides it into customizable exposure level zones, displayable as false color or zebra.
PortKeys LS7P monitor displaying waveform and vectorscope for image analysis.
Figure 6: LS7P displaying professional image analysis tools.
PortKeys LS7P monitor displaying the Log Stops exposure tool.
Figure 7: LS7P displaying the exclusive Log Stops exposure tool.

4.3 Wireless Camera Control & Autofocus

The LS7P offers extensive wireless camera control capabilities for various camera brands, including ARRI, RED, Blackmagic Design, Canon, Sony, and Panasonic. You can adjust settings such as aperture, shutter speed, ISO, ND filter, and white balance directly from the monitor's touchscreen.

For Sony users, the monitor introduces advanced autofocus features:

  • Touch Focus: Select and move your camera’s focus point directly on the touchscreen.
  • Focus Tracking Frame: Select and move your camera’s tracking frame box directly on the monitor’s touchscreen, making the monitor a natural extension of your camera.
PortKeys LS7P monitor displaying the camera control interface with various settings.
Figure 8: Camera control interface on the LS7P monitor.

4.4 One-to-Many Multi-Camera Control

The LS7P supports a unique one-to-many control system, allowing a single master Portkeys monitor to wirelessly communicate with and adjust settings on up to four other compatible Portkeys monitors (e.g., LH7P, LH5PII, BM7IIDS, BM5IV WR) within a 50-meter (165 feet) range. This feature is ideal for multi-camera setups, enabling simultaneous adjustments without additional cables.

PortKeys LS7P monitor displaying the multi-camera control interface.
Figure 9: Multi-camera control interface.

5. Maintenance

5.1 Screen Protection

The LS7P comes with two screen protectors to safeguard the touchscreen from scratches and accidental damage. Apply one protector carefully to the screen, ensuring no dust or bubbles are trapped underneath. Keep the spare for future use.

5.2 Cleaning

Use the provided screen wipes or a soft, lint-free cloth to clean the monitor screen. For the body, a dry or slightly damp cloth can be used. Avoid harsh chemicals or abrasive materials that could damage the finish or screen coating.

5.3 Firmware Updates

Firmware updates are released periodically to improve performance, add new features, and enhance compatibility. These updates can be loaded via the USB-A port located at the bottom of the monitor. Refer to the official PortKeys website for the latest firmware and instructions.

6. Troubleshooting

6.1 No Image on Screen

  • Ensure the monitor is powered on and the battery is charged or external power is connected correctly.
  • Verify that the HDMI or SDI cable is securely connected to both the camera and the monitor.
  • Check the camera's video output settings to ensure it's sending a signal compatible with the monitor (e.g., 1080p60, 4K DCI 30P).
  • Try a different HDMI/SDI cable to rule out cable issues.

6.2 Touchscreen Unresponsive

  • Check if the touchscreen lock switch (located on the top) is engaged. Disengage it to enable touchscreen functionality.
  • Restart the monitor.
  • Ensure the screen is clean and free from debris or moisture.

6.3 Camera Control Issues

  • Ensure the correct camera model is selected in the monitor's settings.
  • Verify that the camera's firmware and the monitor's firmware are up to date for optimal compatibility.
  • Check the wireless connection between the monitor and the camera.

6.4 Power Issues

  • If using an NP-F battery, ensure it is fully charged and properly seated.
  • If using DC input, verify the power source is providing 7-24V and the cable connection is secure.

7. Specifications

Feature Detail
Model Number LS7P
Display Size 7 inches
Resolution 1920 x 1080
Brightness 1000 nits
Contrast Ratio 1000:1
Color Depth 10-bit (8+2 FRC)
Viewing Angle 80° (all sides)
Dimensions (L x W x H) 176.2 x 103.8 x 39.3 mm (6.93 x 4.08 x 1.54 inches)
Weight 409 grams (14.42 ounces)
HDMI Input 1x (4K DCI 30P / 1080P60)
HDMI Output 1x (1080P60)
SDI Input 1x (3G-SDI 1080P60)
SDI Output 1x (3G-SDI 1080P60)
USB Port 1x USB-A (for firmware updates, LUT loading)
Audio Output 1x 3.5mm Headphone Jack
Power Input DC 7-24V (locking 5.5x2.1mm barrel connector)
Battery Support Sony NP-F series
Power Consumption 13W
Power Pass-Through 8V/10W (via NP-F dummy battery plate)
Supporting Language English
Origin Mainland China

7.1 Package Dimensions & Weight

  • Length: 22 cm
  • Width: 13 cm
  • Height: 7 cm
  • Weight: 0.7 kg

8. User Tips

  • Keep Firmware Updated: Regularly check the official PortKeys website for the latest firmware updates. Updating your monitor's firmware ensures optimal performance, access to new features, and improved compatibility with various camera models.
  • Utilize Custom LUTs: Experiment with custom 3D LUTs to achieve your desired look directly on set, saving time in post-production.
  • Optimize Power: For extended shoots, consider using the DC input with a V-Mount or Gold Mount battery to avoid frequent battery changes.

9. Warranty and Support

For detailed warranty information, technical support, and service inquiries, please refer to the official PortKeys website or contact their customer service directly.

A comprehensive user manual is also available in PDF format for download. You can find it at: PortKeys LS7P User Manual (PDF).

© 2024 PortKeys. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.