1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your IKSLED 5A DC12V 24V Cabinet Closet Light Sensor Switch. This intelligent switch is designed for various applications, including wardrobes and cabinets, offering different sensing methods for convenience and energy efficiency.
WARNING: Please strictly follow the instructions and safety tips provided in this manual to ensure safe and proper use of the product.
2. Product Overview & Components
The IKSLED Cabinet Closet Light Sensor Switch comes in several variants, each offering unique functionality. All models operate on DC 12V-24V and have a rated current of 5A and a rated power of ≤60W. The main components include the sensor head, control unit, and connecting wires.
3. Specifications
| Attribute | Value |
|---|---|
| Brand Name | IKSLED |
| Model Number | motion sensor |
| Material | Plastic |
| Working Voltage | DC 12V-24V |
| Rated Current | 5A |
| Rated Power | ≤60W |
| EU LVD Voltage | Below 50Vac or 75Vdc |
| Is Smart Device | No |
| Origin | Mainland China |
| Certification | RoHS, LVD, EMC, CE |
| High-concerned chemical | None |
Sensor Specifics:
- Hand Sweep Sensor: Sensing distance: 5-10cm. Requires a 10mm hole for installation.
- Single-Door Control Sensor: Requires a 10mm hole for installation.
- Dual-Door Control Sensor: Requires a 10mm hole for installation.
- Touch Sensor: Requires a 12mm hole for installation.
- PIR Sensor: Sensing distance: 1-3M. Requires a 12mm hole for installation.
4. Installation
Follow these steps to install your IKSLED sensor switch:
- Connect the light: Ensure your LED light strip or fixture is ready for connection.
- Secure the induction switch: Mount the sensor switch in the desired location.
- Power on: Connect the power supply to activate the system.
Wiring Instructions:
- The short wire connects to the light.
- The long wire connects to the power supply.
- The grey wire should be connected to the negative pole (-).
- The white wire should be connected to the positive pole (+).
Mounting Options:
The sensor switches can be installed in two ways: concealed or open installation.
- Concealed Installation: Drill a hole of the appropriate size (10mm or 12mm depending on sensor type) and insert the sensor head.
- Open Installation: Fix the base bracket with screws, then insert the sensor head into the bracket.
5. Operation Guide
Operating instructions vary depending on the sensor model:
5.1 Hand Sweep Sensor Switch
- Function: Wave your hand to turn the light on or off.
- Dimming: Long press (hover your hand over the sensor) to continuously adjust the brightness.
5.2 Touch Sensor Switch
- Function: Tap the sensor to turn the light on or off.
- Dimming: Press and hold the sensor for stepless dimming.
5.3 PIR Sensor Switch (Motion Sensor)
- Function: The light turns on when motion is detected within the sensing distance (1-3 meters, 120° induction angle).
- Automatic Turn-off: The light turns off automatically 30 seconds after people leave the sensing area.
- Note: If people are constantly active in the sensing area, the timer keeps overlapping. The sensor may not detect people who are still and unresponsive.
5.4 Door Control Sensor Switch
There are two types of door control sensors:
- Single-Door Control: The light turns on when the door opens and turns off when the door closes.
- Dual-Door Control: The light turns on when either door opens. It will only turn off when both doors are closed.
6. Troubleshooting
If the LED light stays on or off after connecting the wires and the switch cannot be controlled, check for the following common issues:
- Positive and Negative Reversed:
- Resolution: Check if the positive and negative poles are connected in reverse. If so, correct the connections.
- Input/Output Reversed:
- Resolution: Check if the input and output wires are reversed. The long wire should connect to the power supply (input) and the short wire to the LED light (output).
- Mismatch of Working Voltage:
- Resolution: Confirm that your power adapter provides a constant voltage of DC 3.7V, 5V, 12V, or 24V, and that your LED light is compatible with the same voltage (DC 3V, 3.7V, 5V, 12V, or 24V). Ensure the voltages match.
7. User Tips
- For optimal performance, ensure the sensor is not obstructed by objects or surfaces that could interfere with its detection capabilities.
- When installing concealed sensors, accurately measure and drill the correct hole size to ensure a snug fit and proper function.
- Test the sensor's functionality immediately after installation to confirm all connections are correct and the desired operation is achieved.
- For dimmable sensors (Hand Sweep, Touch), experiment with the long-press duration to find your preferred brightness level.
8. Maintenance
To ensure the longevity and proper functioning of your sensor switch:
- Keep the sensor lens clean and free from dust or debris. Use a soft, dry cloth for cleaning.
- Avoid exposing the sensor to excessive moisture or extreme temperatures.
- Do not use harsh chemicals or abrasive cleaners on the product.
9. Warranty and Support
This IKSLED product comes with a 1-year warranty from the date of purchase.
For any technical assistance, troubleshooting beyond this manual, or warranty claims, please contact the seller or manufacturer directly. Refer to your purchase documentation for contact information.
A user manual in PDF format is available for download: View User Manual (PDF)
10. Product Demonstration Video
Watch this video for a visual demonstration of the sensor switch functionalities: