liitokala 46135-3.2V25Ah

Contents

LiitoKala 3.2V 25Ah LiFePO4 Lithium Battery User Manual

Model: 46135-3.2V25Ah

1. Introduction

Thank you for choosing the LiitoKala 3.2V 25Ah LiFePO4 Lithium Battery. This high-performance battery is designed for various applications requiring high capacity and high discharge rates, such as DIY 12V/24V battery packs for solar inverters, electric vehicles, coaches, and golf carts. This manual provides essential information for safe and effective use, including specifications, setup, operation, maintenance, and safety precautions.

LiitoKala 46135 LiFePO4 battery highlighting 25Ah capacity, 3C high discharge, 80Wh energy, and 4000+ cycle life.
Figure 1: LiitoKala 46135 LiFePO4 Battery with key features.

This image illustrates the LiitoKala 46135 LiFePO4 battery, emphasizing its 25Ah high capacity, 3C high discharge capability (up to 75A continuous), 80Wh energy per cell, and a cycle life exceeding 4,000 cycles, all contributing to enhanced safety and stability.

2. Safety Information and Warnings

⚠ WARNING: Potential fire risk. Strictly follow all instructions for charging, storage, and disposal.

  • **Charging Safety**: Always use a compatible LiFePO4 charger that adheres to the recommended charging current and voltage limits. Overcharging or using an incompatible charger can lead to severe damage, overheating, fire, or explosion.
  • **Temperature Control**: Ensure the battery is charged and discharged within the specified temperature ranges (Charging: 0-55°C, Discharging: -20-60°C). Extreme temperatures can degrade performance and pose safety risks.
  • **Overheating**: The battery is equipped with a safety valve designed to open and relieve pressure if the internal temperature exceeds 200°C. However, this is a last-resort safety feature; always prevent the battery from reaching such temperatures.
  • **Short Circuit Protection**: Avoid short-circuiting the battery terminals. This can cause excessive current flow, leading to overheating, fire, or damage to the battery and connected equipment.
  • **Physical Damage**: Do not puncture, drop, crush, or disassemble the battery. Damaged batteries can be extremely dangerous.
  • **Storage**: Store batteries in a cool, dry place, away from direct sunlight, heat sources, and flammable materials. Keep out of reach of children.
  • **Disposal**: Do not dispose of lithium-ion batteries in general waste. Consult your local authority's website for information on proper and safe disposal of lithium-ion batteries in accordance with applicable legal requirements.
  • **Professional Use**: The data provided in this manual is for reference. For precise measurements and critical applications, always refer to professional instruments.
Diagram showing the safety valve on the LiitoKala 46135 battery, indicating pressure relief if internal temperature exceeds 200°C.
Figure 2: Safety Valve Mechanism.

This diagram illustrates the safety valve integrated into the LiitoKala 46135 battery. This valve is designed to provide pressure relief if the internal temperature of the battery exceeds 200°C, thereby reducing safety risks.

3. Product Specifications

The LiitoKala 46135 LiFePO4 battery offers robust performance and durability. Below are its detailed technical specifications:

Detailed parameter diagram for LiitoKala 46135 LiFePO4 battery, showing dimensions and electrical characteristics.
Figure 3: Battery Parameters and Dimensions.

This image provides a detailed overview of the LiitoKala 46135 LiFePO4 battery's parameters, including its brand, model name, capacity, internal resistance, voltage ratings, charging/discharging currents, weight, size, stud height, cycle life, and operating temperatures.

LiitoKala 46135-3.2V25Ah LiFePO4 Battery Specifications
Attribute Value
Brand Name liitokala
Model Number 46135-3.2V25Ah
Type LiFePO4
Nominal Capacity 25Ah (25000mAh)
Rated Voltage 3.2V
Cut-off Voltage 2.5V
Full Voltage 3.65V
Internal Resistance ≤1.5mΩ
Charging Current (Max) ≤25A (1C)
Discharge Current (Max Continuous) ≤75A (3C)
Energy per Cell 80Wh
Cycle Life ≥4000 cycles
Battery Weight 0.5 ± 0.01KG
Battery Size (Diameter x Length) 46.3 ± 0.3mm x 135.3 ± 0.3mm
Stud Height 17mm
Total Length (with studs) 170 ± 0.5mm
Charging Environment Temperature 0-55℃
Discharge Environment Temperature -20-60℃

4. Setup and Installation

The LiitoKala 46135 LiFePO4 battery is designed for effortless DIY assembly, featuring high-conductivity screw terminals for quick and reliable battery pack construction.

LiitoKala 46135 batteries arranged for DIY assembly, showing screw terminals and bus bars for connection.
Figure 4: Effortless DIY Assembly.

This image demonstrates the ease of DIY assembly for the LiitoKala 46135 batteries, highlighting their high-conductivity screw terminals which facilitate quick and reliable battery pack construction and wiring.

4.1 Unpacking and Inspection

  • Carefully unpack the battery and inspect for any visible damage.
  • Verify that all included accessories, such as DIY battery connectors, washers, and nuts, are present.
Image showing multiple LiitoKala 46135 batteries along with included DIY battery connectors, washers, and nuts.
Figure 5: Included Accessories for DIY Assembly.

This image displays several LiitoKala 46135 batteries alongside the complimentary DIY battery connectors, washers, and nuts provided for convenient assembly of battery packs.

4.2 Connecting Batteries (DIY Pack Assembly)

  • Ensure all batteries are at a similar state of charge before connecting them in series or parallel to form a battery pack.
  • Use the provided high-conductivity screw terminals, connectors, washers, and nuts for secure and efficient connections.
  • Always connect positive (+) terminals to positive (+) and negative (-) terminals to negative (-) when connecting in parallel.
  • When connecting in series, connect the positive (+) terminal of one battery to the negative (-) terminal of the next.
  • Tighten all connections firmly to prevent loose contacts, which can cause resistance and heat buildup.
  • It is highly recommended to use a Battery Management System (BMS) for any multi-cell battery pack to ensure balanced charging, discharging, and overall safety.

5. Operating Instructions

5.1 Charging the Battery

  • Use a dedicated LiFePO4 battery charger with a constant voltage (CV) and constant current (CC) charging profile.
  • The recommended maximum charging current is 25A (1C). Avoid exceeding this limit to prolong battery life and ensure safety.
  • The full voltage for charging is 3.65V per cell. Ensure your charger is set to this voltage.
  • Charge the battery within the ambient temperature range of 0-55°C.
  • Monitor the battery during charging for any signs of overheating or unusual behavior. If the battery becomes excessively hot, discontinue charging immediately.
  • Once charging is complete, disconnect the battery from the charger.

5.2 Discharging the Battery

  • The maximum continuous discharge current is 75A (3C). Ensure your application's current draw does not exceed this limit.
  • The cut-off voltage for discharge is 2.5V per cell. Do not discharge the battery below this voltage to prevent irreversible damage. A BMS is crucial for managing discharge cut-off in battery packs.
  • Discharge the battery within the ambient temperature range of -20-60°C.
  • Avoid deep discharges whenever possible to maximize the battery's cycle life.

6. Maintenance and Storage

6.1 General Maintenance

  • Keep the battery terminals clean and free from corrosion.
  • Regularly inspect the battery for any physical damage, swelling, or leaks. Discontinue use immediately if any issues are observed.
  • Ensure all connections in a battery pack remain tight and secure.

6.2 Storage

  • For long-term storage, charge the battery to approximately 50-70% of its capacity (around 3.3V-3.4V per cell).
  • Store the battery in a cool, dry, and well-ventilated area, away from direct sunlight, heat sources, and flammable materials.
  • Avoid storing batteries in environments with extreme temperatures.
  • If storing for extended periods, periodically check the battery's voltage and recharge to the recommended storage level if necessary.

7. Troubleshooting

This section addresses common issues you might encounter with your LiFePO4 battery.

7.1 Battery Not Charging

  • **Check Charger**: Ensure you are using a compatible LiFePO4 charger that is functioning correctly.
  • **Connections**: Verify all charging connections are secure and free from corrosion.
  • **Battery Voltage**: If the battery voltage is extremely low (below 2.5V), some chargers may not initiate charging. A specialized charger with a 0V activation function might be needed, or the battery may be irreversibly damaged.
  • **Temperature**: Ensure the battery is within the acceptable charging temperature range (0-55°C).

7.2 Low Performance or Short Run Time

  • **Full Charge**: Confirm the battery is fully charged before use.
  • **Discharge Rate**: Ensure the application's current draw does not exceed the battery's maximum continuous discharge rate (75A).
  • **Temperature**: Operating the battery outside its optimal discharge temperature range (-20-60°C) can affect performance.
  • **Battery Age/Cycles**: Over time, all batteries experience capacity degradation. If the battery has undergone many cycles (e.g., close to 4000), reduced performance is expected.
  • **Internal Resistance**: High internal resistance can lead to voltage sag and reduced performance. This can be a sign of an aging or damaged battery.

7.3 Battery Overheating

  • **Charging Current**: Reduce the charging current if the battery is getting hot during charging.
  • **Discharge Current**: Reduce the load on the battery if it's overheating during discharge.
  • **Ventilation**: Ensure adequate ventilation around the battery, especially during high-power applications.
  • **Internal Short**: If overheating occurs without apparent cause, discontinue use immediately as it may indicate an internal short circuit.

If you encounter issues not covered here or require further assistance, please contact the seller or a qualified battery technician.

8. User Tips

  • **Balance Cells**: For DIY battery packs, regularly check and balance individual cell voltages to ensure optimal performance and longevity. A good BMS will handle this automatically.
  • **Proper Wiring**: When building battery packs, use appropriate gauge wires and bus bars that can handle the expected current without excessive voltage drop or heating.
  • **Ventilation**: Always ensure your battery enclosure or installation area has sufficient ventilation to dissipate heat, especially during high-power applications.
  • **Monitor Performance**: Consider using a battery monitor to keep track of voltage, current, and temperature, which can help in proactive maintenance and troubleshooting.

9. Warranty and Support

For specific warranty terms and conditions, please refer to the information provided by your point of purchase or contact the seller directly. Keep your purchase receipt as proof of purchase.

For technical support or inquiries, please reach out to the Liitokala Direct Store or your authorized distributor.

© 2024 LiitoKala. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.