IKSLED motion sensor

Contents

DC12V 24V LED Cabinet Light Sensor Switch User Manual

Brand: IKSLED | Model: Motion Sensor Switch

Introduction

This manual provides detailed instructions for the installation, operation, and troubleshooting of your IKSLED DC12V 24V LED Cabinet Light Sensor Switch. This versatile switch is designed for various applications, including wardrobes, cabinets, and other furniture, offering convenient and efficient lighting control through different sensing technologies.

Safety Information

WARNING: Please strictly follow the instructions, safety tips, and use the product with caution.

  • Ensure the power supply is disconnected before installation or maintenance.
  • Verify that the working voltage of the sensor switch matches your LED light and power adapter (DC3.7V, 5V, 12V, or 24V).
  • Avoid exposing the sensor to excessive moisture or extreme temperatures.
  • Do not attempt to modify or repair the device yourself. Contact qualified personnel for assistance.

Setup Instructions

1. Usage Steps

  1. Connect the LED light to the sensor switch.
  2. Securely install the induction switch in the desired location.
  3. Finally, connect the power supply to use.

2. Wiring Instructions

Proper wiring is crucial for the correct function of the sensor switch. Refer to the diagram below:

  • The short wire connects to the LED light.
  • The long wire connects to the power adapter.
  • The grey wire connects to the negative pole (-).
  • The white wire connects to the positive pole (+).
Detailed wiring diagram showing input and output ports, dimensions of the control unit, and connection to an LED strip.
Detailed wiring diagram for the sensor switch, showing connections to LED and power supply.
Close-up of the wiring connections for LED and power adapter, showing positive and negative terminals.
Close-up view of the LED and power adapter connections.

3. Installation Methods

The sensor switches can be installed in two ways: concealed or open.

Diagram showing two installation methods: concealed (drilling and inserting) and open (using a base bracket).
Concealed and Open Installation Methods.

Concealed Installation:

  1. Drill a hole of the appropriate size (refer to sensor specifications for hole diameter).
  2. Insert the sensor head into the drilled hole.

Open Installation:

  1. Fix the base bracket to the surface with screws.
  2. Insert the sensor head into the base bracket.

Operating Instructions

The operation varies depending on the type of sensor switch you have:

1. Touch Sensor Switch

Touch Sensor Switch module.
Touch Sensor Switch.
Example of a touch sensor switch installed in a wooden cabinet, being activated by a finger.
Activating the Touch Sensor Switch.
  • Function: Touch control on/off, Long press for stepless dimming.
  • Operation: Tap the sensor to turn the light on or off. Press and hold the sensor to adjust the brightness continuously.

2. Hand Sweep Sensor Switch

Hand Sweep Sensor Switch module.
Hand Sweep Sensor Switch.
Hand sweeping motion activating the sensor for cabinet lighting.
Activating the Hand Sweep Sensor Switch.
  • Function: Sweep on/off, dimmable.
  • Operation: Wave your hand across the sensor to turn the light on or off. Hover your hand over the sensor to continuously adjust the brightness.

3. Single-Door Control Sensor Switch

Single-Door Control Sensor Switch module.
Single-Door Control Sensor Switch.
Cabinet lights turning on when the door is opened, demonstrating the door control sensor.
Single-Door Control in action.
  • Function: Open door, light on; Close door, light off.
  • Operation: The light will turn on automatically when the door is opened and turn off when the door is closed.

4. Dual-Door Control Sensor Switch

Dual-Door Control Sensor Switch module.
Dual-Door Control Sensor Switch.
  • Function: Light turns on when either door opens, and only turns off when both doors are closed.
  • Operation: If you open one door, the light will turn on. The light will only turn off when both doors are closed.

5. PIR Sensor Switch (Motion Sensor)

PIR Sensor Switch module.
PIR Sensor Switch.
Diagram illustrating the PIR sensor's 120-degree induction angle and 1-3 meter sensing distance, with a 30-second delayed shutdown.
PIR Sensor detection range and delay.
  • Function: The light turns on when motion is detected and turns off automatically 30 seconds after you leave.
  • Operation: The light activates upon detecting movement within its sensing range (1-3 meters, 120° induction angle). It will remain on as long as continuous motion is detected. After motion ceases, the light will turn off after a 30-second delay. Note: If a person remains still and unresponsive, the sensor may not detect them.

Product Demonstration Video

Video demonstrating the functionality of the motion, hand sweep, touch, and PIR sensors with LED lights.

Maintenance

  • Keep the sensor lens clean and free from dust or obstructions to ensure optimal performance.
  • Regularly check all wiring connections to ensure they are secure.
  • Clean the device with a soft, dry cloth. Do not use abrasive cleaners or solvents.

Troubleshooting

Problem: LED light stays on or off, and the switch cannot be controlled after wiring.

There are three common reasons for this issue:

  1. Positive and negative poles reversed: The power input wires (positive and negative) are connected incorrectly.
  2. Input/output reversed: The power adapter is connected to the output port, and the LED light is connected to the input port.
  3. Mismatch of working voltage: The working voltage of the adapter, sensor, and LED light are not compatible.

Resolution:

  1. Confirm Voltage: Verify that your power adapter provides a constant voltage (DC3.7V, 5V, 12V, or 24V) and that your LED light is compatible with the same voltage.
  2. Check Polarity: Inspect if the input/output and positive/negative poles are connected in reverse. If so, correct the connections.
  3. Correct Input/Output: Ensure the long wire from the sensor is connected to the power adapter (input) and the short wire is connected to the LED light (output).

Specifications

Attribute Value
Brand Name IKSLED
Model Number motion sensor
Switch Type Sensor Switch (Hand Sweep, Touch, PIR, Door Control)
Material Plastic
EU LVD Voltage Low voltage: Below 50Vac or 75Vdc
Working Voltage DC 12V-24V
Rated Current 5A
Rated Power ≤60W
Sensing Distance (Hand Sweep) 5-10cm
Sensing Distance (PIR) 1-3M
Hole Size (Hand Sweep, Door Control) 10mm
Hole Size (Touch, PIR) 12mm
Is Smart Device No
Origin Mainland China
Certification RoHS, LVD, EMC, CE

User Tips

  • Many users find these switches to be a perfect and excellent addition to their cabinet lighting, highly recommending them for convenience.
  • When planning concealed installation, carefully measure the thickness of your wood or material to ensure the sensor fits properly and does not protrude. The required hole sizes are 10mm or 12mm depending on the sensor type.
  • If you encounter issues, always double-check wiring polarity and voltage compatibility first, as these are common causes of malfunction.

Warranty and Support

This product comes with a 1-year warranty.

For further details, technical support, or warranty claims, please refer to the official product documentation or contact the seller directly. A comprehensive user manual in PDF format is available for download: View User Manual (PDF).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.