1. Introduction
The Dual-Rod Handheld Grain Moisture Meter (Model AR-991) is a portable digital instrument designed for rapid moisture content measurement of various grains and seeds. Utilizing the electrical resistance measurement principle, the device provides reliable on-site testing for agricultural production, grain storage, trading, and food processing applications. The integrated LCD with backlight and voice broadcast function enhances usability in different working environments.
2. Product Components and Display
Familiarize yourself with the main components and controls of your grain moisture meter.
The device features a large LCD with backlight for clear readings and dedicated buttons for various functions:
- Power Button (ON/OFF): To turn the device on or off.
- Category Button (VARIETY): To select the grain type for measurement.
- Lock Button (HOLD): To hold the current measurement reading on the display.
- Adjustment Button (ADJUST): For bias adjustment or other settings.
- Voice Select Button (VOICE): To activate or deactivate the voice broadcast function.
3. Specifications
| Feature | Specification |
|---|---|
| Product Name | Dual-Rod Handheld Grain Moisture Meter |
| Model | AR-991 (also known as JGL-188) |
| Power Supply | 4 × AA batteries |
| Rated Voltage | 6 V DC |
| Material | ABS housing with stainless steel dual probes |
| Net Weight | 254 g |
| Probe Length | 22.5 cm |
| Display Mode | LCD with backlight |
| Measurement Principle | Resistance method |
| Measuring Range | 12%–45% moisture content |
| Measurement Accuracy | ±1% |
| Resolution | 10% FS |
| Applicable Temperature Range | -25°C to 50°C |
| Supported Grain Types | 14 selectable categories including corn, wheat, soybeans, rapeseed, sesame, cottonseed, rice, and feed pellets |
| Main Functions | Moisture measurement, voice broadcast, data storage, bias adjustment, alarm setting |
4. Setup
4.1 Battery Installation
- Open the battery compartment located on the handle of the device.
- Insert four AA batteries according to the polarity markings inside the compartment.
- Close the battery compartment securely.
Note: Use only the specified 4 x AA batteries. Do not mix old and new batteries.
5. Operation
5.1 Preparation
- Ensure the probes are clean and free from debris.
- Select the appropriate grain type using the Category (VARIETY) button.
5.2 Measurement Procedure
- Insert the dual metal probes vertically into the grain sample to ensure sufficient contact.
- Avoid contact with hard foreign objects during insertion.
- Power on the device using the Power (ON/OFF) button.
- Initiate the measurement according to the selected mode (usually automatic upon insertion and power-on). The instrument will automatically process the data.
5.3 Data Reading
Read the moisture value directly from the LCD display. The device may provide simultaneous voice broadcast of the result if the voice function is enabled. If necessary, use the Lock (HOLD) button to freeze the measurement data on the screen or adjust bias settings using the Adjustment (ADJUST) button according to operational requirements.
5.4 After Measurement
Remove the probes from the sample and power off the device using the Power (ON/OFF) button.
6. Precautions
- Use only the specified 4 × AA batteries. Do not mix old and new batteries.
- Do not use the instrument in explosive or highly humid environments.
- Measurement results may vary depending on grain temperature and density; allow samples to reach ambient temperature before testing.
- Do not insert probes into excessively hard materials to prevent bending or damage.
- Avoid dropping or subjecting the device to strong mechanical shock.
- Remove batteries if the device will not be used for an extended period.
7. Storage and Maintenance
- Clean the metal probes with a dry soft cloth after each use. Do not use corrosive cleaning agents.
- Store the instrument in a dry, ventilated environment away from direct sunlight.
- Regularly check battery contacts for corrosion.
- If abnormal readings occur, verify battery condition and recalibrate using the bias adjustment function.
8. User Tips
- For consistent results, ensure the probes are fully inserted into the grain sample and that the sample is at ambient temperature.
- Users have reported quick and consistent readings when used for grain moisture testing.
9. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not power on | Dead or incorrectly installed batteries | Check battery polarity, replace with new AA batteries. |
| Inaccurate or inconsistent readings | Dirty probes, incorrect grain type selected, sample temperature not ambient, low battery, need for recalibration | Clean probes, select correct grain type, allow sample to reach ambient temperature, replace batteries, use bias adjustment function. |
| Probes bent or damaged | Inserted into excessively hard material | Avoid inserting into hard materials. Contact support for replacement probes if available. |
10. Compliance and Warning Information
10.1 Warning Information
WARNING!
- This device contains metal probes with sharp ends. Handle carefully to avoid puncture injury.
- Do not attempt to disassemble or modify the device.
- Keep away from water and high-temperature sources.
- Keep out of reach of children.
Note: The above warning information is for reference only. Final warning language must comply with the official language requirements of the destination EU country.
10.2 Proper Disposal
Follow WEEE directives for electronic waste. Batteries must be disposed of according to local battery recycling regulations.
10.3 Compliance Disclaimer
This document is provided for product instruction purposes only. It does not constitute legal advice. The seller is responsible for ensuring compliance with destination market regulations.
11. Further Support
For a detailed user manual in PDF format, please refer to the official document: