1. Introduction
The Tuya Zigbee Intelligent Solar Soil Moisture Meter is a smart device designed to help you monitor the health of your plants by accurately measuring soil moisture, temperature, and electrical conductivity (EC). This solar-powered sensor integrates seamlessly with the Tuya smart home platform, allowing for remote control, smart scene automation, and real-time data access via a mobile application. This manual provides detailed instructions for installation, operation, maintenance, and troubleshooting to ensure optimal performance of your device.
Figure 1: Tuya Zigbee Solar Soil Sensor with moisture and temperature detection ranges.
2. Safety Information
Please read this manual carefully before using the device. Keep it for future reference.
- Do not attempt to disassemble or modify the device.
- Ensure proper battery polarity during installation.
- Keep the device away from extreme temperatures or open flames.
- Avoid submerging the main body of the device in water, only the probes are designed for soil insertion.
- This device is designed for outdoor use and is IP66 waterproof, but prolonged exposure to harsh weather conditions should be avoided if possible.
3. Package Contents
Verify that all items are present in your package:
- Smart Solar Soil Sensor
- Cross screwdriver (1)
- User Manual (1)
4. Specifications
Figure 2: Visual representation of product dimensions and specifications.
| Feature | Detail |
|---|---|
| Battery | AA 1.2V * 3 Ni-MH battery (Rechargeable) |
| Solar Charging Current | 35mA |
| Communication Protocol | Zigbee 3.0 |
| Wireless Protocol | Zigbee IEEE 802.15.4 |
| Wireless Distance | 50M |
| Waterproof Level | IP66 |
| Temperature Detection Range | -10~60°C (14°F~140°F) |
| Moisture Detection Range | 0-100%RH (Non-Condensing) |
| Max. Electrical Conductivity Range | 20ms/cm |
| Temperature Detection Accuracy | 0.5°C (Adjustable) |
| Moisture Detection Accuracy | 5%RH (Adjustable) |
| Electrical Conductivity Detection Accuracy | 3%FS 0.01ms/cm |
| Time Span of Detection | 10min (Adjustable) |
| Working Temperature | -10~60°C (14-140°F) |
| Working Humidity | 0-100%RH (Non-Condensing) |
| Size | 78mm X 78mm X 146mm |
5. Setup
5.1. Battery Installation
Please dry the device before installing the battery to prevent stains from seeping in. Pay attention to the positive and negative poles when installing the battery, following the silk screen markings.
- Remove the waterproof rubber plug from the battery compartment.
- Use the provided cross screwdriver to unscrew the screws.
- Remove the cover and battery compartment, then install the AA 1.2V * 3 Ni-MH batteries.
- Replace the battery compartment cover and tighten it with the screws.
- When installing waterproof plugs, ensure the sloping side faces upwards to prevent leakage.
5.2. Device Insertion into Soil
- Remove the probe protective sleeve first.
- Fully insert the device probes into the soil.
- Important Considerations:
- It is not suitable to install the soil sensor in indoor potted plants with small inner diameters, as this will affect the probe needle's contact.
- When using in a dense lawn, remove the grass layer first to ensure the probes can fully contact the soil.
- In flower beds, ensure the distance between the sensor and any barrier is more than 10cm to avoid affecting the probe.
- For 100% moisture detection in a water environment, ensure the water submerges the detection probes and reaches at least 7cm (higher than the probes).
- After insertion, press the reset key to wake the device. It will then detect and report moisture and EC levels to the app interface.
Figure 3: Installation and Use Guide.
5.3. App Download and Pairing
The device needs to work with a Zigbee gateway. Please purchase a Zigbee gateway separately and add it first.
- Download the Smart Life App:
- Android: Download "Smart Life" from Google Play.
- iOS: Download "Smart Life" from the Apple App Store.
- Register and Login:
- Launch the "Smart Life" app.
- Register using your mobile phone number or email address, create a password, and then log in.
- If you already have an account, simply log in.
- Add Devices:
- Add Zigbee Gateway: First, add your Tuya Zigbee gateway by following its specific instructions (for wired or wireless gateways).
- Add Sub-devices (Soil Sensor): Ensure the soil sensor is in pairing state (indicated by a flashing LED). If the device is not flashing, press and hold the reset button for 7 seconds until the LED flashes quickly (2 times per second).
Figure 4: Smart Control EZ-Pairing Steps.
Figure 5: Zigbee Pairing and App Remote Control.
6. Operation
6.1. App Main Interface
Once connected, the Smart Life app will display real-time data for soil moisture, temperature, and electrical conductivity (EC).
Figure 6: App Remote Control Interface.
6.2. Records
The app allows you to view historical data for:
- Electrical Conductivity: Daily, monthly, and yearly records.
- Moisture: Daily, monthly, and yearly records.
- Temperature: Daily, monthly, and yearly records in both Celsius and Fahrenheit units.
6.3. Parameter Settings
You can customize various parameters within the app:
- Temperature Unit: Switch between Celsius (°C) and Fahrenheit (°F).
- Temperature Sensitivity: Set the temperature change value that triggers a report (range: 0.5°C~3°C / 32.9°F~37.4°F).
- Moisture Sensitivity: Set the moisture change value that triggers a report (range: 1%~5%).
- High Temperature Alarm: Set the upper limit for temperature alerts (range: -10°C~60°C / 14°F~140°F).
- Low Temperature Alarm: Set the lower limit for temperature alerts (range: -10°C~60°C / 14°F~140°F).
- High Moisture Alarm: Set the upper limit for moisture alerts (range: 0%~100%).
- Low Moisture Alarm: Set the lower limit for moisture alerts (range: 0%~100%).
- Detection Interval Time: Adjust how frequently the device detects data (range: 5 minutes~60 minutes).
6.4. Reporting and Alarm Logic
- Reporting Logic: The device reports data to the app if the detected temperature or moisture change exceeds the preset sensitivity within the detection interval. For example, if the interval is 5 minutes, temperature sensitivity 0.5°C, and moisture sensitivity 2%, the device will detect every 5 minutes. If changes exceed these thresholds, new values are updated in the app.
- Alarm Logic: An alarm is triggered if the soil temperature or moisture value goes above the set upper limit or below the set lower limit. For instance, if the maximum moisture is set to 70%, an alarm will sound if soil moisture exceeds 70%.
Figure 7: Accurate Detection and Smart Scene Triggering.
6.5. Scene Linkage
The device supports smart scene creation. For example, you can set a rule in the app: "If the soil moisture is detected to be below 30%, then turn on the watering switch for 5 minutes." This feature also supports LAN scene linkage, meaning scenes can still function even if the gateway is temporarily disconnected.
Figure 8: Creating Smart Scenes with Sprinkler Timer.
Figure 9: Linkage with Smart Sprinkler Controller.
6.6. Sharing Device
You can share the Zigbee soil sensor with other members of your household, allowing everyone to monitor and manage plant health collaboratively within the smart home system.
Figure 10: Share Device with Family.
6.7. Delete and Reset
To remove the device from your account and restore its default settings, delete the device through the Smart Life app.
7. Maintenance
7.1. Solar Charging
The device is equipped with a solar panel for recharging its Ni-MH batteries. When the battery level is low, it will automatically begin charging if exposed to sunlight.
- Avoid Obstruction: During the charging process, ensure the solar panel is not obstructed and can fully absorb sunlight for efficient charging.
- Clean Solar Panel: Regularly clean any dust or dirt from the solar panel to maintain optimal charging efficiency.
Figure 11: Solar and Rechargeable Battery Powered.
7.2. Cleaning Probes
To ensure accurate and stable readings, it is crucial to regularly clean any soil or debris from the metal probes of the sensor during use.
8. Troubleshooting (FAQ)
Q1: Are there other ways to detect soil temperature and moisture besides automatic detection in the app?
A1: Yes. You can press the reset button on the device. The device will then immediately detect and report the current values to the app within approximately 3 seconds.
Q2: What moisture range indicates that the soil moisture is too high?
A2: When the device measures approximately 80% moisture, it indicates that the soil is too wet. Please note that the device cannot reach 100% moisture in soil, as 0% moisture is defined in water for calibration purposes.
Q3: What should be noted during the use of the device?
A3: It is important to regularly clean any soil or debris from the metal probes during use. This helps maintain the sensing accuracy and stability of the device.
Q4: The device has not updated new values to the app for a long time. Is this normal?
A4: Yes, this can be normal. Often, if the device does not update for an extended period, it's because the data change is small and has not reached the preset reporting standard configured in the app. You can press the reset key to force the device to report the updated temperature and moisture values immediately.
9. User Tips
- Always ensure your soil sensor is properly paired with a Zigbee gateway for full functionality and remote access.
- For immediate readings or to refresh data, a quick press of the reset button can be very useful.
- Regular cleaning of both the solar panel and the metal probes will significantly extend the device's lifespan and maintain measurement accuracy.
- When setting moisture alarms, remember that soil moisture around 80% is typically considered oversaturated for most plants. Adjust your settings based on your specific plant needs.
10. Warranty and Support
For detailed warranty information and technical support, please refer to the official product page or contact the seller directly. You may also find additional resources in the comprehensive user manual available in PDF format: Download User Manual (PDF).
11. Product Demonstration Video
Watch this video for a quick overview and demonstration of the Tuya Zigbee Solar Soil Moisture Meter's features:
Video: A short demonstration video showcasing the Tuya Zigbee Solar Soil Sensor's features, including solar charging, EC monitoring, low humidity alarms, and integration with a smart sprinkler timer.