MYOSLIM 15 Tesla 6500W ABS Muscle Stimulator RF NEO Body Sculpting Machine

1. Important Safety Information

Please read this manual thoroughly before operating the MYOSLIM Body Sculpting Machine. Improper use can lead to injury or damage to the device. This device is intended for professional use in beauty salons or under the supervision of trained personnel.

• Do not operate the machine if you have any medical conditions that contraindicate electromagnetic or radiofrequency treatments.
• Keep the device away from water and moisture.
• Ensure proper ventilation during operation.
• Only use accessories and handles provided or approved by the manufacturer.
• Unplug the device from the power source before cleaning or maintenance.
• Do not attempt to open or repair the device yourself. Contact qualified service personnel for assistance.

2. Product Overview

The MYOSLIM Body Sculpting Machine utilizes High-Intensity Electromagnetic Muscle Trainer (HI-EMT) technology combined with Radiofrequency (RF) to stimulate muscle contractions and induce fat reduction. It is designed for body shaping, muscle building, fat burning, skin tightening, cellulite reduction, and pelvic floor muscle repair.

Key Benefits:

• Shaping a strong and handsome figure
• Preventing from aging and maintaining physical youth
• Reducing chronic pain in muscles and joints
• Helping blood circulation and smooth
• Improving the constitution of obesity and the efficiency of weight loss

3. Setup Instructions

1. Unpacking: Carefully remove all components from the packaging. Verify that all parts are present according to the packing list.

2. Placement: Place the machine on a stable, flat surface in a well-ventilated area, away from direct sunlight and heat sources.

3. Connect Power: Connect the power supply cable to the machine and then to a suitable electrical outlet (110-240V AC, 50-60Hz). Ensure the power switch on the back of the machine is in the OFF position before connecting.

   Play video

   Video demonstrating the power-on sequence and initial interface navigation.

4. Attach Handles: Securely attach the desired treatment handles (2, 4, or 5 handles, or cushion handle) to the corresponding ports on the machine. Ensure they are firmly connected.

   

   

5. Power On: Press the power button on the back of the machine. The screen will light up, displaying the MYOSLIM logo and then the main interface.

6. Initial Settings: On the startup interface, you can adjust the brightness and sound of the machine. The machine supports English, Spanish, Portuguese, Chinese, French, Russian, and other 8 languages, which can be adjusted as needed.

   

4. Operating Instructions

The machine offers two main operating modes: Pattern 1 (Simple Mode) and Pattern 2 (Advanced Mode). A typical session for a specific area is about 30 minutes, divided into three stages.

4.1. Simple Mode (Pattern 1)

In Simple Mode, the initial RF and ENERGY settings are reset to zero. You only need to adjust the energy intensity.

1. Select Pattern 1: From the main interface, select 'Pattern 1'.

2. Adjust Energy: Adjust the energy intensity according to the client's comfort and treatment goals. The operation process is divided into three stages:

   1. Stage 1 (3-5 minutes): Start with low energy (20% or lower) to allow muscles to adapt to EMS energy and frequency stimulation.

   2. Stage 2 (5-25 minutes): Gradually increase energy intensity based on client feedback. Listen to the client and adjust as necessary for high-intensity exercise.

   3. Stage 3 (Last 3-5 minutes): Reduce energy (20% or lower) to decrease EMS stimulation and frequency, helping to alleviate muscle fatigue.

3. Apply Handles: Use a strap to securely tie the handle to the customer's abdomen or other target area.

4.2. Advanced Mode (Pattern 2)

Advanced Mode allows for adjustment of both stimulation frequency (10Hz-200Hz) and energy intensity. The machine has an intelligent control system that cross-uses different frequencies for optimal results.

1. Select Pattern 2: From the main interface, select 'Pattern 2'.

2. Adjust Frequency and Energy: The machine provides recommended values. Follow the three-stage operation process:

   1. Stage 1 (3-5 minutes): Adjust energy to 20% or lower. This stage focuses on muscle adaptation to EMS stimulation.

   2. Stage 2 (5-25 minutes): Increase energy and frequency based on client feedback. Recommended frequency guidelines:

      • Large muscles: Lower frequency (10Hz-40Hz)
      • Medium muscles: Medium frequency (40Hz-100Hz)
      • Small muscle groups: Higher frequency (100Hz-200Hz)

      It is recommended to use all three frequency ranges as the intelligent system will optimize their application.

   3. Stage 3 (Last 3-5 minutes): Reduce energy and frequency (20% or lower) to minimize muscle stimulation and alleviate fatigue.

4.3. Final Shutdown

To shut down the machine, press and hold the power button on the back for approximately 3 seconds. Then, on the screen, click the 'Yes' button to confirm the shutdown.

5. Maintenance

• Cleaning: Regularly clean the machine's exterior and handles with a soft, damp cloth. Do not use abrasive cleaners or solvents.
• Storage: Store the machine in a cool, dry place when not in use.
• Inspection: Periodically inspect cables and connections for any signs of wear or damage.

6. Troubleshooting

If you encounter any issues with your MYOSLIM machine, please refer to the following common problems and solutions:

• Machine does not power on: Check if the power cable is securely connected and if the power outlet is functioning. Ensure the power switch on the back is in the ON position.
• Handles not working: Verify that the handles are correctly attached to the machine. Check the settings on the interface to ensure a program is selected and energy is set above zero.
• Unusual noise or smell: Immediately turn off the machine and unplug it. Contact customer support for assistance.

For persistent issues, please contact our technical support team.

7. Specifications

8. User Tips

• Always start with lower intensity settings and gradually increase to find a comfortable yet effective level.
• Ensure the handles are securely fastened to the treatment area to maximize contact and effectiveness.
• Maintain consistent treatment schedules for optimal results.
• Stay hydrated before and after sessions.
• Consult with a professional for personalized treatment plans and to ensure suitability for your specific needs.

9. Warranty and Support

The MYOSLIM Body Sculpting Machine comes with a 1-year warranty.

For any questions, technical support, or after-sales service, please contact our support team. We offer video technical support and online assistance.

You can also refer to the official user manual in PDF format for more detailed information: View User Manual (PDF)