ANYFAR NTG 5.0/5.1 Upgrade Module

Contents

ANYFAR Wireless CarPlay & Android Auto Upgrade Module

User Manual for Mercedes Benz NTG 5.0/5.1 Systems

1. Introduction

This manual provides detailed instructions for the installation, operation, and troubleshooting of your ANYFAR Wireless CarPlay and Android Auto Upgrade Module. This module is designed to integrate advanced smartphone connectivity into your Mercedes Benz vehicle's existing NTG 5.0 or 5.1 infotainment system, enhancing your driving experience with modern features while retaining original car controls.

The module acts as a retrofit kit, adding CarPlay and Android Auto functionality to your standard vehicle. It maintains an "OEM" feel by utilizing your car's existing display and controls, including the rotary controller and steering wheel buttons.

Key functionalities include:

  • Apple CarPlay: Seamless integration with your iPhone for voice control of calls, messages, navigation, and music via Siri. Supports both wireless and wired connections.
  • Android Auto: Google's car-machine interaction system for voice control of phone functions, information, navigation, and music.
  • Navigation: Use your favorite navigation apps like Google Maps, Waze, and Apple Maps with live traffic information directly on your car's screen.
  • Voice Control: Intelligent voice control (Siri and Google Assistant) for hands-free operation, improving driving safety and convenience.
  • Camera Inputs: Supports video decoding for front view, rear view (with intelligent dynamic trajectory display and radar support), and 360° panoramic view cameras.
  • Bluetooth Audio Output: Audio output from the factory car Bluetooth, reducing interference and providing faster sound response.

2. Compatibility

This module is compatible with Mercedes Benz vehicles equipped with the NTG 5.0 or 5.1 system. Please verify your car's NTG system version and screen size before installation. The module is designed for head units with 7", 8", or 10.25" screens without touch functionality.

Important: This module is only compatible with Mercedes Benz NTG 5.0/5.1 car radio systems. Please check your original car radio homescreen menu picture to confirm compatibility. Examples of compatible and incompatible screens are shown below:

Image showing compatible and incompatible Mercedes Benz NTG radio screens. A screen with 'Radio Presets Info FM Sound' and a checkmark is compatible (NTG 5.0/5.1), while screens with NTG 4.0, 4.5, and 4.7 are marked with an X.
Figure 2.1: Compatible vs. Incompatible NTG Radio Screens

The following table details compatible Mercedes Benz models, years, and screen sizes:

Table of compatible Mercedes Benz models, years, and screen sizes for NTG 5.0 & 5.1 systems.
Figure 2.2: Compatible Model List
Mercedes Benz NTG 5.0 & 5.1 Compatibility
Car Model Years Screen Size
CLA/CLS/GLA/GLE/A/B/SLC/GLS 2015-2017 7/8
C180/C200/GLC/V Class 2015-2017 7/8
V260/AMG C63 2017 8.3
AMG GT 2018 8.3
S Class 2013-2016 10.25
Aston Martin DB11 2019 7

3. Setup and Installation

Professional installation is recommended. Ensure the vehicle's power is disconnected before beginning installation.

3.1 Wiring Diagram

The following diagram illustrates the connections for the upgrade module. Connect the module to the factory LVDS harness and power harness as shown.

Diagram showing the connections for the CarPlay/Android Auto module, including LVDS and power harnesses.
Figure 3.1: Module Wiring Diagram

3.2 DIP Settings & Switch

The DIP switch settings must be configured according to your specific car model and screen size. Refer to the table below for the correct settings. Ensure the dial is set to "ON" for the specified positions.

DIP Switch Settings for Mercedes Benz Models
Car Model Year Screen Size DIP Setting
CLA/CLS/GLA/GLE/A/B/SLC/GLS 2015-2017 7/8 23457 ON
C180/C200/GLC/V Class 2015-2017 7/8 2357 ON
V260/AMG C63 2017 8.3 2367 ON
AMG GT 2018 8.3 12367 ON
S Class 2013-2016 10.25 2358 ON
Aston Martin DB11 2019 7 2357 ON

Note: After changing the DIP Settings, please reboot the decoder box for the changes to take effect.

3.3 External Settings (Rear View Camera, Radar & Trajectory)

This CarPlay interface supports aftermarket camera input. If you are installing an aftermarket rear view camera, connect it as per the wiring diagram. The module also supports dynamic guidance lines and radar display.

Diagram showing connections for an optional aftermarket rear view camera.
Figure 3.3: Optional Aftermarket Rear View Camera Connection

To configure radar and trajectory settings:

  1. Enter the system settings: Click "Factory mode" -> "Advanced mode". Enter the password "888888".
  2. In the MCU setup, uncheck the "AO" option.
  3. Return to the previous level and click "Restart system" to enable the reversing rear view function.
  4. If your aftermarket camera supports reversing trajectory lines, uncheck the A1 box to display them.
  5. For aftermarket radar options, uncheck the A2 box to enable it.

The front camera input configuration follows the same procedure.

4. Operating Instructions

4.1 Switching Between Systems

To switch between the factory OEM car system and the CarPlay/Android Auto system, long press the "Back" button on your car's central control knob or the relevant button on the steering wheel.

Image showing how to switch between OEM car system and CarPlay/Android Auto by long pressing the knob button.
Figure 4.1: Switching Systems

4.2 Button Controls

The module integrates with your original car controls for seamless operation:

Steering Wheel Button Functions
Button Operation Function
Phone Icon Long press Switch OEM screen to interface screen OR Interface
Phone Icon Short press Hang up the phone
Phone Icon Short press Answer the phone
Volume + Short press Increase the volume
Volume - Short press Decrease the volume
Image showing steering wheel buttons and central control panel with their functions for the module.
Figure 4.2: Steering Wheel and Central Control Panel Functions
Central Control Panel Functions
Button/Control Operation Function
Back Arrow Long press Switch OEM screen to interface screen OR Interface screen to the OEM screen
Knob Swipe/Click Control function
Triangle (Hazard) Double Click Switch OEM screen to interface screen OR Interface screen to the OEM screen
Knob Dial up Previous song
Knob Dial down Next song

4.3 Wireless Connection (CarPlay & Android Auto)

The module uses Bluetooth for initial device information confirmation and then establishes a Wi-Fi connection for data transmission. Ensure your vehicle's audio system is set to Bluetooth music mode for optimal performance.

  1. Turn on your smartphone's Bluetooth and Wi-Fi, and keep them active.
  2. On your phone, search for Bluetooth devices and select "CAR Audio_XXXX" (where XXXX is a unique identifier).
  3. Pair your phone with the module. If prompted, confirm the pairing code.
  4. For CarPlay, accept the "Use CarPlay" prompt. For Android Auto, follow any additional on-screen prompts to complete the connection.
  5. After connecting, verify that the audio source on your iPhone is set to the original car radio (e.g., "MB Bluetooth").
Screenshots showing the Bluetooth pairing process and audio output selection for CarPlay.
Figure 4.3: Wireless Connection Steps

5. Maintenance

The ANYFAR Wireless CarPlay & Android Auto Upgrade Module is designed for durability and reliable performance. To ensure its longevity and optimal function:

  • Keep the module and its connections free from moisture and extreme temperatures.
  • Avoid blocking the module's mounting position with metal components, as this can interfere with Wi-Fi signal transmission.
  • Periodically check for any firmware updates from the manufacturer to ensure compatibility and access to the latest features.
  • Clean the car's display screen regularly with a soft, lint-free cloth to maintain clear visibility.

6. Troubleshooting

6.1 Bluetooth Disconnects

Problem: The module's Bluetooth connection disconnects after initial pairing.

Solution: This is a normal phenomenon. The Bluetooth connection is primarily used for initial pairing and device information confirmation. Once confirmed, a Wi-Fi connection is established to transmit data. The Bluetooth connection then disconnects to avoid interference with the Wi-Fi data stream.

6.2 Cannot Connect CarPlay/Android Auto, but Bluetooth is Paired

Problem: Your phone's Bluetooth is paired with the module, but CarPlay or Android Auto does not connect or function correctly.

Solution:

  1. On your smartphone, forget the Bluetooth device "CAR Audio_XXXX".
  2. Reset your phone's network settings. For iPhone, go to Settings > General > Transfer or Reset [Device] > Reset > Reset Network Settings. (Note: This will reset all network settings, including Wi-Fi passwords and cellular settings).
  3. Attempt the wireless connection steps again (Section 4.3).

6.3 Unstable Wireless CarPlay/Android Auto Connection

Problem: The wireless CarPlay or Android Auto connection is unstable or frequently drops.

Solution:

  1. Check Mounting Position: Ensure that the mounted position of the CarPlay box is not blocked by metal components within the vehicle. Metal can significantly impair Wi-Fi signal transmission.
  2. Switch Wi-Fi Channel: Access the CarPlay box settings: Go to Factory Mode > Connectivity Settings > Hotspot Band. Try selecting a different Wi-Fi channel (e.g., 1, 6, or 11), depending on the current region and local interference.

7. Specifications

Feature Detail
Brand Name ANYFAR
Model Compatibility Mercedes-Benz C Class, GLC, V Class (W205, W447, etc.) with NTG 5.0/5.1 systems
Display Size (Car Screen) 7", 8", 10.25" (non-touch)
Din Double Din
Interface Original car interface integration
Output Type Colored
Special Features Built-in GPS, Mobile Phone, MP3 players, Voice Control, CarPlay, Android Auto, Reversing Input
Digital Media Format CD (retains original CD functionality)
Built-in Screen No (uses existing car screen)
Connectivity 2.4G & 5.8G WIFI, Bluetooth 5.0 Technology
Audio Processing Built-in DSP, fully adjustable Audio EQ
Camera Inputs 2 RCA inputs for rear and right PAL/NTSC cameras; supports HD 360 panoramic cameras
Parking Assistance Dynamic Guidance Lines, Parking Distance Control (OEM parking style)
Installation Plug and play, non-destructive installation
High-concerned chemical None
Package Dimensions (approx.) Length: 25cm, Width: 16cm, Height: 9cm
Package Weight (approx.) 0.756 kg

8. Warranty and Support

The ANYFAR Wireless CarPlay & Android Auto Upgrade Module comes with a 1-year warranty from the date of purchase, ensuring quality assurance and peace of mind.

For technical assistance, installation guidance, or any product-related inquiries, please contact our customer support. We offer 1-on-1 engineer services and have a professional team dedicated to providing comprehensive support.

For additional guides and documents, you may refer to the official user manual PDF: User Manual (PDF)

Icons representing Quality Assurance, 24 Hour Shipping, 365 Day Warranty, 100% Authentic, 1V1 Engineer Services, and Professional Team.
Figure 8.1: Quality Assurance and Support

9. User Tips

  • Verify Compatibility: Always double-check the compatibility of the module with your specific vehicle model, year, and especially the NTG system version (5.0 or 5.1) before purchasing and attempting installation. If you are unsure, contact customer support with clear photos of your car's center console and radio screen for verification.
  • Professional Installation: While the installation is described as 'plug and play', it involves working with your car's electrical system and interior components. If you are not experienced with car electronics, professional installation is highly recommended to avoid potential damage or compatibility issues.
  • Test Thoroughly: After installation, thoroughly test all functions of the CarPlay/Android Auto module, including audio, navigation, voice control, and camera inputs, to ensure everything is working as expected before reassembling your car's interior.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.