1. Introduction
This manual provides detailed instructions for the safe and efficient operation of your Mini Projector Z1. Please read this manual thoroughly before using the projector and keep it for future reference.

The Mini Projector Z1 offers an 80" display, 30,000 hours of LED light life, and is suitable for outdoor projection.
Video: Unboxing and initial setup of the Mini Projector Z1, demonstrating power connection and basic menu navigation.
2. Safety Information
- Do not look directly into the projector lens when the lamp is on.
- Keep the projector away from water or other liquids.
- Do not block the ventilation openings.
- Use only the specified power adapter (DC 12V/1.5A).
- Avoid placing the projector on unstable surfaces.
- Do not attempt to repair the projector yourself. Contact qualified service personnel.
3. Setup
3.1 Interface Introduction
Familiarize yourself with the various ports and buttons on your projector:

Projector interfaces and controls.
- USB Input Slot: For connecting USB storage devices.
- Micro SD Card Slot: For inserting Micro SD cards.
- AV Input Slot: For connecting AV video equipment.
- Earphone Slot: For connecting headphones or external speakers.
- DC Power Input: For connecting the power adapter (DC 12V/1.5A).
- Power Switch: To turn the projector on/off.
- Control Buttons (Left, Right, OK, Input, Return): For navigation and selection.
3.2 Power Connection
Before turning on the projector, connect the power adapter:
- Connect the DC 12V/1.5A power adapter to the projector's DC power input.
- Plug the power adapter into a suitable power outlet.

Ensure the power cable is securely connected and the power switch is in the 'ON' position.
3.3 Power On/Off
To power on or off the projector:
- Press the power switch on the projector or the power button on the remote control.
4. Operating Instructions
4.1 Boot Screen and Multimedia Interface
Once the projector starts, the boot screen will display for 2 to 5 seconds, then transition to the multimedia screen.

The main multimedia interface for content selection.
4.2 Focus Adjustment
To achieve a clear image:
- Locate the projector vertically to the projection screen.
- Adjust the keystone wheel until you get a clear picture (square pixels appear sharp).
- You can play a video or display the menu to check the focus adjustment.

The projector supports digital zoom, quick correction, and fast focus for optimal image display.
4.3 Multimedia Connection (USB/Micro SD)
To play content from USB or Micro SD cards:
- Insert the USB drive or Micro SD card into the corresponding slot on the projector.
- From the multimedia screen, select the desired content type (Movie, Music, Photo, or Text).
- Navigate to the file you wish to display and press the 'OK' button to play or stop.
Supported Multimedia Formats:
| Category | Formats |
|---|---|
| Audio | MP3/APE/OGG/AAC/FLAC/ATRA |
| Photo | JPEG/BMP/PNG/GIF |
| Video | MKV/AVI/MOV/MP4/TS/ASF/FLV/PMP/MPG/VOB/WMV |
| E-book | TXT |
4.4 AV Video Equipment Connection
To connect external AV video equipment:
- Use a 3-in-1 video converter cable (not included, typically RCA to 3.5mm jack).
- Connect the cable to the projector's AV slot.
- Connect the other end of the cable to your AV video equipment.
- Once connected, select 'AV' as the signal source from the projector's menu.
5. Maintenance
5.1 Cleaning
- Lens: Use a soft, lint-free cloth and lens cleaning solution. Do not use abrasive cleaners.
- Exterior: Wipe the projector's exterior with a soft, dry cloth.
- Ventilation: Ensure ventilation openings are clear of dust and debris to prevent overheating.
5.2 Storage
- Store the projector in a cool, dry place away from direct sunlight and extreme temperatures.
- If storing for an extended period, place it in its original packaging or a protective case.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No Power | Power cable not connected; Power switch off. | Ensure power adapter is securely connected and power switch is ON. |
| No Image | Incorrect input source selected; Media not properly inserted. | Select the correct input source (USB, Micro SD, AV). Reinsert media. |
| Blurry Image | Focus not adjusted; Projector not perpendicular to screen. | Adjust the keystone wheel for focus. Ensure projector is aligned with the screen. |
| No Sound | Volume too low; External speakers not connected. | Increase volume. Connect external speakers if needed. |
7. Specifications
| Feature | Detail |
|---|---|
| Model | Z1 |
| Native Resolution | 1080P |
| Brightness | 20 Lumens |
| Lamp Life | 30,000 hours (LED) |
| Display Size | Up to 80 inches |
| Projective Mode | T4 |
| Keystone Correction | Manual Correction |
| Power Source | AC |
| Voltage Range | High voltage (50-1000V DC, 75-1000V AC) |
| Function | Video Playback |
| Inbox Adaptor | Yes |
| Structure | Without display device |
| Dimensions (L x W x H) | 12.7 cm (5 in) x 8.2 cm (3.27 in) x 4.5 cm (1.77 in) |
| Weight | 0.424 kg |

Compact dimensions of the Mini Projector Z1.
8. User Tips
- For best image quality, use the projector in a dark environment.
- Ensure the projector is placed on a stable, flat surface to avoid image distortion.
- Regularly check for firmware updates from the manufacturer's website (if available) to improve performance.
- When connecting to a laptop or PC, ensure your display settings are configured to output to the projector.
9. Warranty and Support
For warranty information, technical support, or service inquiries, please contact the seller or refer to the official product documentation.
A user manual in PDF format is available for download: View User Manual (PDF)