MOES ZA2L1

Contents

MOES Tuya Zigbee Smart Fingerprint Door Handle Lock

User Manual

MOES Zigbee Smart Handle Lock product image

A MOES Zigbee Smart Handle Lock, showcasing its sleek design and smart features.

Product Description

The Zigbee door handle lock is a smart door lock that utilizes Zigbee wireless technology for unlocking. It offers enhanced convenience by allowing users to unlock without a physical key or magnetic card. The mobile phone application provides real-time monitoring of the door lock status, unlocking records, and other information, facilitating remote management.

Key Features

  • Multiple unlocking methods: Fingerprint, Password, Card, Mechanical Key, Remote Control (via App).
  • Zigbee wireless technology for smart home integration (Tuya/MOES App).
  • Real-time monitoring and management via mobile application.
  • Suitable for various wooden doors in offices, bedrooms, and hotels.
Components of the smart lock

Various components of the MOES Smart Lock, including the handle, keypad, and internal mechanism.

Smart lock applicable for wooden doors

Illustrates the smart lock's applicability for various wooden door types, including office, bedroom, and hotel doors.

Warnings

  1. Do not disassemble, reassemble, modify, or attempt to repair this product yourself. Such work should only be performed by authorized professionals.
  2. Product batteries must be recycled and disposed of separately from household waste, in accordance with local environmental regulations.

Product Specifications

Attribute Specification
Model ZA2L1
Housing Aluminum
Power 4 x 1.5V AAA battery
Fingerprint Capacity 50
Card Capacity 250
Password Capacity 250
Wireless Protocol Zigbee
Battery Life >3000 times use
Max User Quantity 300

Structure and Drilling

Smart lock structure and drilling diagram

Detailed diagram showing the external components and internal drilling requirements for installation.

Component Identification

  1. Emergency power
  2. Fingerprint sensor
  3. Card reading area
  4. Touch keypad
  5. Mechanical key
  6. Fixing screw hole
  7. Setting button
  8. Initialization button

Drilling Dimensions

  • Backset: 60/70 mm
  • Door thickness (for latch): 22 mm
  • Main bore diameter: Ø50 mm
  • Latch bore diameter: Ø24 mm
  • Vertical distance between fixing screws: 42 mm
  • Horizontal distance for strike plate: 52 mm
  • Overall latch length: 95 mm
  • Strike plate dimensions: 70mm (length), 27mm (width)

Setup and Installation

Preparation for Use

1. Download MOES App

Scan the QR code below or search for "MOES App" on your device's app store. The MOES App is recommended for optimal compatibility and features, though Tuya Smart/Smart Life App also works.

MOES App download QR code and app store icons

QR code for MOES App download, with links to Google Play and Apple App Store.

2. Registration or Log in

Open the MOES App. Tap "Register" to create an account using your phone number, verification code, and a new password. If you already have a MOES account, choose "Log in".

App Connection (Initial Setup)

  1. Ensure the lock is at its default status, initialized, or removed from the App.
  2. Enable Zigbee connection request on the lock by pressing 1+#, then verifying the super admin password. The lock will wait for 120 seconds for connection.
  3. Ensure the device is within effective signal range of your smart Zigbee gateway.
  4. Ensure your MOES App is successfully connected to a Zigbee gateway.
  5. In the App, navigate to the gateway, select "Add subdevice", and follow the prompts (e.g., "LED already blink"). The connection process may take 10-120 seconds depending on network conditions.
  6. After successful addition, you can edit the device name and manage it within the App.
MOES App pairing mode instructions

MOES App interface showing instructions for ensuring the device is in pairing mode.

Operation

Unlocking Methods

Fingerprint Unlock

Place your registered finger on the fingerprint sensor. The lock will unlock if the fingerprint is recognized.

Fingerprint unlock mechanism

Visual representation of the fingerprint unlock process, highlighting 50-piece capacity and >99% accuracy.

Password Unlock

Enter your registered password on the touch keypad, followed by #. The lock supports virtual passwords for enhanced security.

Password unlock mechanism with virtual password feature

Demonstrates the password unlock feature, including the use of virtual passwords to prevent peeping.

Remote Unlock by App

Using the MOES App, you can remotely unlock the door, provided the lock is connected to a Zigbee gateway and your phone has internet access.

Remote unlock via smartphone app

A user remotely unlocking the smart door handle lock using the MOES mobile application.

Temporary Password for Visitors

Generate temporary passwords via the App for guests or service personnel, which can be time-limited or single-use.

Temporary password feature for visitors

A person using a temporary password to access the door, ideal for visitors or short-term access.

Key Combinations for Lock Operations

It is recommended to mainly use the MOES App for management. However, direct operations on the lock are possible:

Add/Modify Super Admin Password

  • Shortcut key: 1+#
  • Operation: Press 1+#. The blue fingerprint LED blinks. Input a 6-digit new password followed by #. The green fingerprint LED blinks. Repeat the new password followed by #.
  • Confirmation: Green fingerprint LED with a long beep indicates success. Red fingerprint LED with 6 short beeps indicates failure.
  • Note: After setting, you can verify by pressing 1+# before modifying.

Add User (Fingerprint/Password/Card)

  • Shortcut key: 2+#
  • Operation: Press 2+#. Input the super admin password. Then, input the finger (5 times), password (twice, 6-8 digits, ending with # each time), or card.
  • Note: The super admin password must be set first.

Turn on Zigbee

  • Shortcut key: 1+#
  • Operation: Press 1+#. Input the super admin password. After successful verification, Zigbee will be enabled for 90 seconds.
  • Note: If the App is already in use, this step is not required again.

Modes

Passage Mode

  • To Activate: Long press the setting button for 5 seconds until the LED turns purple with a long beep.
  • To Cancel: Long press the setting button for 5 seconds until the LED turns blue. Any normal verification (fingerprint, password, card) will also cancel passage mode.

Locked-in Mode

  • To Activate: Short press the setting button and the LED turns yellow. In this mode, only the admin can open the door.
  • To Cancel: Short press the setting button and the LED turns green. The admin can also cancel it by any verification.

Maintenance

Battery Replacement

When the battery is low, the lock will provide a warning. Replace all four 1.5V AAA batteries promptly to ensure continuous operation. Ensure correct polarity when inserting new batteries.

Cleaning

Clean the lock's exterior surfaces, including the fingerprint sensor and keypad, with a soft, dry cloth. Avoid using abrasive cleaners or solvents that could damage the finish or electronic components.

User Tips

  • Installation: While the product is generally easy to install, it's crucial to carefully review the drilling diagram and ensure your door dimensions (especially spindle size, e.g., 8mm x 8mm for standard European doors) are compatible to avoid needing additional modifications.
  • Connectivity: This is a Zigbee version lock designed for use with Tuya/MOES smart home platforms. Ensure you have a compatible Zigbee gateway for full smart functionality.
  • Security: Utilize the virtual password feature to enhance security when entering your code in front of others.
  • Battery Life: Regularly check battery status via the app or listen for low battery warnings to avoid being locked out.

Troubleshooting

If you encounter problems installing or operating your device, please refer to the product data sheet for further assistance:

https://www.moestech.com/blogs/news/bdl-snm10

Common issues often relate to incorrect installation, battery problems, or network connectivity. Ensure all steps in the setup and operation sections are followed carefully.

Warranty and Support

Warranty Instructions

The product is covered by a 24-month warranty, effective from the date of purchase by a retail customer. To exercise warranty rights, the purchaser must present a warranty card and proof of purchase (e.g., VAT invoice, financial receipt, or other document confirming the actual date of purchase).

If product quality problems occur within 24 months from the date of receipt, prepare the product and packaging and return it to the place of purchase for after-sales maintenance. Damage caused by personal reasons will incur a maintenance fee.

The warranty does not cover:

  • Mechanical damage caused by user fault or product defects resulting from such damage.
  • Damage caused by improper use of the product.

The warranty will expire under the following circumstances:

  • Removal of the warranty seal from the product.
  • Removal of the serial number from the product.
  • Actions to eliminate physical defects in the product outside of authorized service.
  • Use of non-original parts and consumables.

For a complete declaration of conformity, please refer to: https://www.moestech.com/blogs/news/zdl-snm10

A detailed user manual in PDF format is also available: User manual (PDF)

Contact Information

Manufacturer: WENZHOU NOVA NEW ENERGY CO.,LTD
Address: Power Science and Technology Innovation Center, NO.238, Wei 11 Road, Yueqing Economic Development Zone, Yueqing, Zhejiang, China
Tel: +86-577-57186815
After-sale Service: service@moeshouse.com

EU Representative (AMZLAB GmbH):
Email: info@amz-lab.d
Tel: +491745298066

UK Representative (EVATOST CONSULTING LTD):
Email: contact@evatost.com
Tel: +44-292-1680945

Recycling Information

All products marked with the WEEE symbol (Waste Electrical and Electronic Equipment Directive 2012/19/EU) must be disposed of separately from unsorted municipal waste. To protect your health and the environment, this equipment must be disposed of at designated collection points for electrical and electronic equipment designated by the government or local authorities. Proper disposal and recycling help prevent potential negative consequences for the environment and human health. To find out where these collection points are and how they work, please contact your installer or local authority.

Recycling symbols for electrical and electronic equipment

Symbols indicating separate collection for electrical and electronic waste.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.