1. Introduction
Thank you for purchasing the Tinsol H004 Mini Gas Heater Stove Heating Cover. This product is designed to convert the flame from your gas stove into radiant heat, providing warmth in outdoor environments. Crafted from high-temperature resistant stainless steel, it is durable, portable, and compatible with various gas stoves. Please read this manual thoroughly before use to ensure safe and efficient operation.
2. Safety & Warnings
FAILURE TO FOLLOW THESE WARNINGS COULD RESULT IN FIRE, EXPLOSION, PROPERTY DAMAGE, OR PERSONAL INJURY.
- Read all instructions before use to ensure safety and prevent damage.
- Keep the device out of reach of children under 3 years old.
- Keep away from children unless supervised by an adult.
- Store the device in a dry place with good ventilation. If storing for extended periods, include a desiccant (dryer) to prevent moisture damage.
- Do not use this product for purposes other than its intended use as a heating cover for a gas stove.
- Inspect the product before each use; do not use if damaged or deformed.
- Ensure the gas stove it is attached to is stable and on a flat, solid surface.
- Always allow the unit to cool completely before handling or storing.
- Do not touch the heating cover when in use or immediately after use, as it will be extremely hot. Use the provided heat-resistant clip for handling.
- Ensure adequate ventilation when operating the gas stove and heating cover to prevent carbon monoxide buildup.
3. Product Components
The Tinsol H004 Mini Gas Heater Stove Heating Cover typically includes the following components:
- Heating Cover Body (Stainless Steel)
- Heat-Resistant Clip / Handle
- User Manual (this document)
4. Setup Instructions
4.1. Unpacking and Inspection
- Carefully remove the heating cover and its accessories from the packaging.
- Inspect all stainless steel parts for any deformation, damage, or burrs. Do not use the product if any damage is found.
4.2. Product Assembly (Attaching to Stove)
The heating cover is designed for universal compatibility with various gas stoves, particularly those with triple or quadruple legs, such as the Soto310 model or cartridge stoves.
- Ensure your gas stove is placed on a flat, stable, and non-flammable surface (e.g., flagstone or earth).
- Align the four snaps (fixed grooves) at the bottom of the heating cover with the pot supports or legs of your gas stove.
- Gently press down and twist slightly to firmly secure the heating cover onto the stove. The four-corner fixed slot design ensures a stable placement.
- Verify that the heating cover is securely attached and does not wobble before proceeding.
5. Operating Instructions
5.1. Ignition and Use
- Ensure the heating cover is securely attached to your gas stove as described in Section 4.2.
- Follow your gas stove's instructions for ignition. Light the gas stove's burner.
- Once the flame is steady, the heating cover will begin to absorb and radiate heat.
- Adjust the gas stove's flame intensity to control the heat output of the heating cover.
- The dual-chimney design with an outer protective layer and an inner heat-absorption layer promotes even heat distribution and improved warming efficiency.
5.2. Extinguishing and Storage
- Turn off the gas stove according to its instructions.
- Allow the heating cover to cool down naturally for approximately 30 minutes. Do NOT attempt to cool it rapidly with water.
- Once completely cool, carefully detach the heating cover from the stove using the provided heat-resistant clip.
- Clean the unit if necessary (see Section 6).
- Store the heating cover in a dry, well-ventilated area.
6. Maintenance
Regular maintenance will ensure the longevity and optimal performance of your Tinsol H004 heating cover.
- Cleaning: After each use and once the unit is completely cool, wipe down the stainless steel surfaces with a damp cloth to remove any soot or residue. For stubborn stains, a mild detergent can be used, followed by thorough rinsing and drying.
- Inspection: Periodically inspect the heating cover for any signs of wear, corrosion, or damage. Pay close attention to the attachment points and the overall structure.
- Storage: Store the heating cover in a dry, clean environment when not in use. Avoid storing it in areas with high humidity or extreme temperatures.
7. Troubleshooting
If you encounter issues with your Tinsol H004 heating cover, please refer to the following common troubleshooting tips:
| Problem | Possible Cause | Solution |
|---|---|---|
| Heating cover is not stable on the stove. | Incorrect attachment; stove surface is uneven. | Ensure the four snaps are correctly aligned and fully engaged with the stove's pot supports. Place the stove on a flat, stable surface. |
| Insufficient heat output. | Gas stove flame is too low; environmental factors (wind). | Increase the gas stove's flame intensity. Use the heating cover in a sheltered area or with a wind deflector for the gas stove. |
| Soot buildup on the cover. | Incomplete combustion from the gas stove. | Ensure your gas stove is operating correctly and the flame is blue. Clean the cover regularly as per maintenance instructions. |
If the problem persists, please contact customer support.
8. Specifications
| Attribute | Detail |
|---|---|
| Model | H004 |
| Type | Gas Stove Heating Cover |
| Material | Stainless Steel + Iron |
| Structure | One Piece (Dual-layer design) |
| Application Method | Manual attachment to stove |
| Usage Condition | Normal Outdoor |
| Fuel (for heating cover) | No Fuel (uses heat from gas stove) |
| Ignition Device | Not Included (relies on gas stove's ignition) |
| Disposable | No |
| Origin | Mainland China |
| Number of Users | 3-5 (estimated heating capacity) |
| Dimensions (Stove Cover) | Width: 120mm, Height: 145mm |
| Dimensions (Clip) | Width: 40mm, Height: 160mm |
| Weight (Stove + Clip) | 370g |
| Package Dimensions | Length: 15cm, Width: 12cm, Height: 12cm |
| Package Weight | 0.439 kg |
9. User Tips
- Portability: The lightweight and compact design makes this heating cover ideal for backpacking, camping, and other outdoor adventures where space and weight are critical.
- Stability: Always ensure the four-snap design is fully engaged with your stove's pot supports for maximum stability, especially on uneven terrain.
- Even Heating: The dual-chimney structure is designed for efficient and even heat distribution. For best results, allow a few minutes for the cover to heat up and begin radiating warmth.
- Anti-Scald: Utilize the provided heat-resistant clip when attaching, detaching, or adjusting the heating cover to prevent burns.
- Multi-Purpose: While primarily a heater, its robust design allows it to be a versatile accessory for various outdoor cooking setups, enhancing comfort during cooler conditions.
10. Warranty & Support
For any product-related inquiries, technical support, or warranty claims, please contact the manufacturer or authorized representative using the information below.
Manufacturer Information:
Company Name: Guangzhou Hongjuan E-commerce Co., Ltd
Full Address: Room 129, Building 3688, Area D, No. 26 Huangcun North Road, Tianhe District, Guangzhou City, Guangdong Province, China
Email: 982748621@qq.com
Phone: +86-18664684907
EU Authorized Representative:
Company Name: MJCM SARL
Full Address: 78 Avenue des Champs-Elysees Bureau 326
Email: mjcm190928@gmail.com
Phone: +33-0767213611
A PDF version of the user manual is available for download. Please refer to the product page for the direct link to the PDF document.