VIEWI P21W 1156 BA15S 1157 BAY15D COB LED Car Interior Light

Contents

User Manual

VIEWI COB LED Car Interior Light

Model: P21W 1156 BA15S 1157 BAY15D

1. Introduction

Thank you for choosing the VIEWI COB LED Car Interior Light. This product is designed to provide bright and efficient lighting for various automotive applications, including brake, tail, backup, and turn signal lights. This manual provides essential information for safe installation, operation, and maintenance of your LED bulbs.

2. Safety Information

  • Always turn off the vehicle's power and allow existing bulbs to cool before handling.
  • Wear appropriate safety gear, such as gloves and eye protection, during installation.
  • Ensure the bulb type and voltage match your vehicle's requirements to prevent damage.
  • Do not touch the LED chips directly, as oils from your skin can reduce their lifespan.
  • Keep out of reach of children.

3. Package Contents

Your package should contain:

  • 1x VIEWI COB LED Car Interior Light bulb (quantity may vary based on order)

4. Specifications

Feature Specification
Brand Name VIEWI
Model Number new001
Item Type LED bulbs
LED Bulb Type Car Bulb
Base Type BA15D
Voltage DC 12V (Range: 11-50V)
Wattage 2W/Bulb
Luminous Flux 249 Lumens & Under
Color Temperature <2700K (Cool white 6000K to 6500K, Red, Yellow options available)
LED Chip Brand Epistar
LED Chip Model 3014
Beam Angle 360°
Average Life (hrs) 5000H
Power Source DC
Power Tolerance 3%
Shape Globe
Length 0.5 (likely inches or cm, refer to dimension diagram)
Area 3-8㎡
Is Smart Device No
Certification CE, ROHS

Note: The 'Length' specification of 0.5 is ambiguous. Please refer to the dimensional diagram below for precise measurements.

Dimensional diagram of the LED bulb
Figure 4.1: Dimensional diagram of the LED bulb, showing a width of 15mm, height of 35mm, and base diameter of 18mm.

5. Installation

Follow these steps to install your new VIEWI COB LED Car Interior Light:

  1. Turn off Power: Before beginning, ensure the vehicle's ignition is off and the power to the light circuit is disconnected. This prevents electrical shock and damage to the bulb or vehicle.
  2. Remove Old Bulb: Carefully remove the old light bulb from its lamp holder. Depending on your vehicle, this may involve twisting, pulling, or releasing a clip.
  3. Insert New LED Bulb: Align the base of the new LED bulb with the lamp holder. Gently push and twist (for bayonet style bases like BA15S/BAY15D) until it is securely seated. Ensure the pins on the bulb base align with the slots in the socket.
  4. Test Functionality: Turn on the vehicle's power and activate the light function (e.g., turn signals, brake lights) to ensure the new LED bulb is working correctly.
Diagram showing steps to remove old bulb, install new LED bulb, and turn on switch
Figure 5.1: Installation diagram. Step 1 shows removing an old bulb. Step 2 shows inserting the new LED bulb into a socket, with input voltage AC 100V-285V indicated. Step 3 shows pressing a light switch to turn on the light.

For a visual guide on the product, please refer to the video below:

Video 5.1: A 15-second video showcasing the VIEWI COB LED Car Interior Light bulbs from various angles on a rotating platform, highlighting their design and different base types.

6. Operation

Once installed, the VIEWI COB LED Car Interior Light operates automatically with your vehicle's existing lighting system. Simply use your vehicle's controls (e.g., turn signal stalk, brake pedal, reverse gear) to activate the corresponding light function.

Yellow LED bulb illuminated in a socket
Figure 6.1: An illuminated yellow LED bulb in a socket, demonstrating operational light output.
White LED bulb illuminated in a socket
Figure 6.2: An illuminated white LED bulb in a socket, demonstrating operational light output.
Red LED bulb illuminated in a socket
Figure 6.3: An illuminated red LED bulb in a socket, demonstrating operational light output.

7. Maintenance

These LED bulbs require minimal maintenance. To ensure optimal performance and longevity:

  • Periodically check the bulbs for any signs of damage or loose connections.
  • Clean the bulb's clear lens gently with a soft, dry cloth if dust or dirt accumulates. Avoid using harsh chemicals.
  • Ensure proper ventilation around the bulb to prevent overheating, although these COB LEDs are designed for efficient heat dissipation.

8. Troubleshooting

If you encounter issues with your LED bulbs, try the following troubleshooting steps:

  • Bulb Not Lighting Up:
    • Check the connection: Ensure the bulb is securely seated in the socket.
    • Verify polarity: Some LED bulbs are polarity-sensitive. If it doesn't light up, try rotating it 180 degrees in the socket (if applicable for your base type).
    • Check vehicle fuse: A blown fuse in your vehicle's lighting circuit could be the cause.
    • Test with another bulb: If possible, test the socket with a known working bulb to rule out a vehicle wiring issue.
  • Flickering or Dim Light:
    • Ensure stable voltage: Verify your vehicle's electrical system is providing a consistent 12V.
    • Canbus compatibility: While these bulbs are Canbus compatible, some sensitive vehicle systems may still require additional load resistors to prevent flickering or error messages.
White LED bulb connected to a power supply, showing 0.09A current and 12.1V voltage
Figure 8.1: A white LED bulb connected to a power supply, displaying a current of 0.09A and voltage of 12.1V, indicating normal operating parameters.

9. User Tips

  • Verify Fitment: Always double-check your vehicle's existing bulb type and dimensions against the specifications provided to ensure a perfect fit before purchase and installation.
  • Canbus Systems: For vehicles with sensitive Canbus systems, if you experience hyper-flashing or error messages, consider installing additional load resistors (not included) in parallel with the LED bulbs.
  • Color Consistency: When replacing multiple bulbs, it's recommended to replace them in pairs (e.g., both turn signals) to ensure consistent light output and color.

10. Warranty and Support

This product comes with a 1-year warranty period from the date of purchase. For warranty claims or technical support, please contact your retailer or the manufacturer directly.

For more detailed guides and documentation, you may refer to the official user manual PDF: View User Manual (PDF).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.