GOYOJO GRS225RF

Contents

GOYOJO GRS225RF Thermal Imaging Optics User Manual

Model: GRS225RF

1. Introduction

The GOYOJO GRS series thermal imaging optics are designed for use in various weather conditions, featuring built-in ranging capabilities. The GRS225RF model specifically includes a 905nm infrared rangefinder and intelligent ballistic calculations to enhance user accuracy in hunting or tactical scenarios. This system is built to perform reliably in extreme environments such as deserts, swamps, jungles, and during rainy, foggy, or snowy days.

Key Features:

  • Super Resolution Function: Delivers crystal-clear imaging results.
  • Continuous Zoom: Allows for precise focus adjustment and a clearer visual experience.
  • User-Friendly Interface: Features silicone buttons and an intuitive UI menu.
  • Rangefinder Function: Algorithmic ranging (GRS225) / 905nm infrared distance measurement (GRS225RF).
  • Intelligent Ballistic Calculations (GRS225RF): Improves shooting accuracy by calculating precise trajectories.
  • Display: 1440x1080 OLED screen.
  • RAV (Recoil Activated Video) & WiFi Application: For recording and connectivity.
  • Optical Zoom: 3.5X optical magnification with 1X-8X digital zoom.
  • Environmental Protection: IP67 rated for use in various harsh environments.
  • Refresh Rate: 50 Hz Imaging.
  • Thermal Detector: 256x192 Pixel.
  • Long Range Detection: Up to 1300m.
  • Battery Life: 7-9 Hours (7H with 18650 battery, 2H with CR123).

2. Specifications

Category Attribute Value
InfraredDetector TypeVanadium Oxide Uncooled Focal Plane Array
Resolution256*192
Die Size12µm
Frame Rate50Hz
DisplayTypeOLED
Dimensions0.49 Inches
Resolution1440*1080
NETD, mK<35mK @ 25°C, F/1.0
OpticalObjective Lens25mm
Eye Relief65mm
Optical Zoom3.5X
Digital Zoom1X-8X
Field of View (FOV)7.0° x 5.3°
Diopter Adjustment-5 to +5 Diopters
Focus Range5m to Infinity
RangeDetection Range1300m (1.8X0.5m)
RangefinderGRS225RF-905nm infrared, 1000m±5m
PhysicalNet Weight (Built-in Battery)GRS225: ≤730g, GRS225RF: ≤760g
DimensionsGRS225: 288*81*75mm (without eyepiece), GRS225RF: 288*85*75mm (without eyepiece)
Max. Recoil800 g/0.4ms
IP LevelIP67
Operating Temperature-30℃ to 50℃ (-22°F to 122°F)
Storage Temperature-40℃ to +60℃ (-104°F to 140°F)
Power & CompatibilitiesBuilt-in Battery Type18650 Lithium Battery
External Battery TypeCR123 Lithium Battery
Built-in Battery Capacity3.7V, 3700mAh
External Battery Capacity3.7V, 450mAh
Operating Time7-9 Hours (7H-18650, 2H-CR123)
FunctionsPicture-In-PictureYes
Video/PhotoYes
Reticles/Pseudo Color ModesYes
Defective Pixel CorrectionYes
RAV & Wi-FiYes
Thermal One-Shot ZeroYes
Additional Features (GRS225RF)BluetoothYes
Ballistic CalculationYes
StorageSD Card32GB
MaterialsConstructionAluminum-Magnesium Alloy

3. Product Overview

The GRS225RF thermal imaging optics unit is a robust and feature-rich device. Below is a diagram illustrating its main components and controls.

GRS225RF Night Vision Scope in use

Figure 1: GRS225RF Night Vision Scope in use, highlighting key features.

GRS225 Thermal Imaging Optics

Figure 2: GRS225 Thermal Imaging Optics, showing various features.

Component Identification:

  1. Power Button
  2. Photo Button
  3. Pseudo Color Button
  4. Knob (Menu/OK, Zoom)
  5. Objective Focusing Wheel
  6. Diopter Adjustment
  7. External Battery Compartment
  8. Charging Port
  9. Lens Cap
  10. Eyepiece Cover
  11. Charging Cable (USB-A to USB-C)
  12. CR123 Battery (External)
  13. Rings (for mounting)

Watch the unboxing and feature overview video for a visual guide:

Video: Unboxing and detailed overview of the GRS225RF Thermal Imaging Optics, including physical features and accessories.

4. Setup

4.1. Rail Mounting of Thermal Imaging Scope

To mount the thermal imaging scope to a rail, follow these steps:

  1. Screw the accessory Picatinny rail to the gun, with the serrated grooves of the Picatinny rail facing forward (towards the muzzle).
  2. Follow the steps shown in the picture to install the rings.
  3. Loosen the knurled nut below the ring.
  4. Slide the device forward from the rear of the rail (towards the buttstock) to avoid blocking other accessories and adjust it to the desired position.
  5. Tighten the knurled nut below the ring to ensure that the device does not wobble.
GRS225RF with 2.5-10X Magnification

Figure 3: GRS225RF showing 2.5-10X magnification and thermal images at different zoom levels.

4.2. Battery Installation and Removal

Please follow the steps below to install the battery:

  1. Turn the battery compartment cover counterclockwise to open it.
  2. Insert the external CR123 battery into the battery compartment with the positive and negative poles facing as shown in the picture.
  3. After installing the battery, turn the battery compartment cover clockwise until it is securely fastened.
  4. The steps for removing the battery are the reverse of steps 1-3.
GRS225RF 7H Battery Life

Figure 4: GRS225RF showing the charging port and control buttons, illustrating battery life.

4.3. Installing the Application (IR-TRACKER V)

Scan the QR code below to download the application for your smartphone:

QR Code for iPhone App Download (Placeholder)

IPHONE APP DOWNLOAD

QR Code for Android App Download (Placeholder)

ANDROID APP DOWNLOAD

Figure 5: QR codes for downloading the IR-TRACKER V application for iOS and Android devices. (Note: Placeholder images used for QR codes as actual QR code images were not provided in ALLOWED_URLS).

5. Operation

5.1. Connecting the Application (AP Mode)

  1. Download the APP 'IR-TRACKER V' on your phone.
  2. When using for the first time, find the device hotspot "XXX_XXXXX" (WiFi name is "model_serial number") in your phone's WiFi settings. The default password is "12345678".
  3. After a successful connection, open the "IR-TRACKER V" software on your phone, click "Connect" in the software to view the image, and use the mobile client software to take photos, record videos, play back, and store images.
  4. The WiFi name and password can be customized after connecting on the client. Click "Settings" on the home page to enter the settings, select "WiFi settings," enter the desired WiFi name and password, and click "Confirm the changes" to complete the settings.

5.2. Connecting the Application (STA Mode)

  1. Connect the client in AP mode. Click "Setting" on the home page to enter the settings, select "Router settings," enter the WiFi name and password you want to connect to, click "Confirm the changes," and the STA mode settings are complete.
  2. Select STA mode on your device and mobile phone WiFi to automatically connect to the network.

5.3. Main Screen Overview

The main screen displays various information and controls. Key elements include:

  • Azimuth angle
  • Palette
  • Inclination angle
  • Aim profile
  • Rotation angle
  • Zoom magnification
  • Video indicator
  • WiFi indicator
  • Reticle
  • Date & Time
  • SD Storage indicator
  • Battery Indicator (A-Built-in battery level, B-External battery level)

5.4. General Operation - Function Menu

Access the function menu by holding the Menu/OK button. Rotate the knob to navigate and press Menu/OK to select.

  • OSD: Toggle On-Screen Display information.
  • WiFi: Turn WiFi on/off and connect. Disabling WiFi when not in use saves power.
  • Picture-in-Picture (PIP): Turn PIP on/off and adjust its position (top/bottom) and magnification (2x).
  • Hot-Spot Tracking: When ON, the main interface displays the highest temperature point with automatic reticle tracking.
  • Distance Estimate: Estimates distance based on target size.
  • RAV (Recoil Activated Video): When ON, the camera automatically records when shooting, adding 10 seconds of pre-trigger video.
  • Ranging (GRS225RF only): Set for single or continuous measurement.
  • Screen Brightness: Adjust eyepiece display brightness in 5 levels.

5.5. General Operation - Image Setting Menu

In the Image Setting menu, you can adjust various visual parameters:

  • Image Setting: Adjust image effects.
  • Contrast: Adjust infrared image contrast (0-100%).
  • Brightness: Adjust infrared image brightness (0-100%).
  • Enhance: Fine-tune image enhancement effects (15 levels, default 5).
  • Dead Pixel: Target and repair pixel defects.
  • Factory Default: Restore all parameters to default (except aim profiles).

5.6. General Operation - Zeroing Menu

The Zeroing menu allows for precise calibration:

  • Aim Profiles: Customize up to five profiles for zero and reticle.
  • Reticle: Choose from 10 reticle types (0 for off).
  • Color: Select reticle color (white/red/green/yellow).
  • Lock Settings: Freeze the image.
  • Magnification: Zoom in 1x-8x with the cross reticle as the center.
  • X: 0.00 / Y: 0.00: Adjust reticle coordinate position on X and Y axes.
  • Reset: Restore reticle position to initial (0,0).

5.7. General Operation - System Setting Menu

Configure device settings in the System Setting menu:

  • Ballistic Reset (GRS225RF): Restore ballistic file parameters.
  • Bluetooth (GRS225RF): Turn Bluetooth on/off and connect to mobile phones.
  • Language: Select UI language.
  • Sleep: Set automatic sleep time (0/5/30/60 minutes).
  • Compass Calibration: Calibrate the compass by rotating the instrument clockwise.
  • Accelerometer Calibration: Calibrate by placing the instrument lens vertically downwards.
  • Audio: Turn audio recording on/off.
  • Upgrade: Perform firmware upgrades via PC.
  • Formatting: Format the built-in memory card.
  • System Information: Displays instrument model and software version.

5.8. GRS225RF Ballistic Assist

The GRS225RF model offers advanced ballistic assistance:

  • Ballistic Calculation Mode: Select Simplified or Ballistic recording method.
  • Simple Variables: Configure parameters like ballistic coefficient, initial velocity, projectile weight, zeroing distance, baseline height, temperature, altitude, and unit settings. Multiple sets can be saved.
  • Ballistic Record Table: Customize multiple sets of distance/ballistic impact parameters.
  • Style of Impact Point: Choose from three bounce point styles.
  • Unit of Ranging: Select distance measurement units (m/feet/yds).

5.9. USB Charging & Data Transmission

  • Charging: Open the Type-C port cover, insert a USB charging cable (DC5V/2A).
  • Data Transfer: Connect the device to a computer with a USB cable to transfer photos, videos, and upgrade data files.
  • Real-time Video Transmission: Open the Type-C interface cover, insert the configured cable, and connect to a monitor display for long-distance transmission. Ensure the device is powered on.

6. Maintenance

6.1. Cleaning the Display, Objective Filter Cover, and Objective Lens

  • Blow away any debris or dust as much as possible, then gently wipe the surface with a lens cloth.
  • For grease stains or dried water spots, use a lens cloth or cotton swab with a small amount of denatured alcohol to gently clean the area.

6.2. Storage When Not in Use For a Long Time

  • Keep the product in a dry, low-light, frost-free environment (between -40°C to 60°C / -104°F to 140°F).
  • When the product is not in use, promptly close the objective lens cover.

7. Troubleshooting

If you encounter any issues, please refer to the table below. If the problem persists, contact customer support. Do not disassemble the product, as this will void the warranty.

Malfunction Cause Action
The image is too darkThe screen brightness is set too lowAdjust the brightness
Filter cap on objective lens not openOpen the filter cap
Image flickerBright light source being observedStop observing bright light sources
The power is too lowCharge the battery
Dirt on the objective lens or eyepieceClean the objective lens & eyepiece
Poor quality imagesUnadjusted diopterAdjusting the diopter
Focus not adjustedAdjust the focus
Product won't turn onInsufficient powerCharge the battery
Batteries installed backwardsReinstall the battery

8. User Tips

  • Always ensure the battery is fully charged before extended use to maximize operating time.
  • When connecting to the app, double-check the Wi-Fi password to avoid connection issues.
  • Utilize the ballistic calculation feature for improved accuracy, especially for long-range targeting.
  • Regularly clean the lenses with a dedicated lens cloth and blower to maintain optimal image quality.
  • Store the device in a dry, temperature-controlled environment to prolong its lifespan.

9. Frequently Asked Questions

Q: How do I know if the device is charging?
A: There is an indicator light near the charging port that will illuminate to show charging status.
Q: Can I use the device in heavy rain?
A: Yes, the device has an IP67 rating, making it waterproof and suitable for use in rainy conditions.
Q: What is the purpose of the Recoil Activated Video (RAV) function?
A: RAV automatically starts recording when a shot is detected, capturing the moments before and after the shot, ensuring you don't miss critical footage.

10. Warranty and Support

10.1. Warranty

This product comes with a 1 Year Warranty from the date of purchase.

10.2. Contact Information

For technical support, warranty claims, or any inquiries, please contact:

10.3. Regulations and Certifications

This product bears the CE Mark and is certified for legal sale in the European Economic Area (EEA). It complies with essential requirements of European Directives and Standards including EN55014-1, EN61000-3-2, EN61000-3-3, and EN55014-2.

It also complies with FCC Statement Part 15 of the FCC Rules, ensuring it does not cause harmful interference and accepts any received interference.

The GRS series products conform to Directive 2011/65/EU (RoHS 2) and its amendments, restricting hazardous substances such as Lead (Pb), Mercury (Hg), Cadmium (Cd), Hexavalent Chromium (Cr6+), Polybrominated Biphenyls (PBB), and Polybrominated Diphenyl Ethers (PBDE).

© 2023 GOYOJO. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.