RETEVIS RB48A

Contents

Retevis RB48A IP67 Waterproof Walkie Talkie User Manual

Model: RB48A

Introduction

This manual provides detailed instructions for the safe and effective use of your Retevis RB48A IP67 Waterproof Walkie Talkie. Please read this guide thoroughly before operating the device to ensure proper functionality and to understand all safety precautions.

For additional resources, including brochures, software/firmware, and other manuals, please visit retevis.com and check the "support" section for your product. A PDF version of this user manual is also available for download: User Manual (PDF).

Important Safety Notices

WARNING

Before using this device, please read this guide which contains important operating instructions for safe usage, control information and operational instructions for compliance with RF Energy Exposure limits in applicable national and international standards.

  • Always comply with local government laws and regulations regarding two-way radio use.
  • Only authorized service personnel should perform repairs and adjustments.
  • Turn off the radio in areas where electromagnetic interference is a concern (e.g., hospitals, aircraft).
  • Do not place the radio near airbags in vehicles.
  • Turn off the radio in flammable or explosive environments.
  • Avoid continuous transmission for extended periods to prevent overheating.
  • Do not use with a damaged antenna.
  • Avoid prolonged direct sunlight or proximity to heating devices.
  • If abnormal odor or smoke is detected, immediately remove the battery and contact support.

Unpacking and Inspection

Before initial use, carefully open the packaging and inspect the main unit and all listed standard accessories. If any items are missing or damaged, please contact your dealer immediately.

Retevis RB48A Heavy Duty Walkie Talkie with key features listed: 3-Proof Design (IP67 waterproof & dustproof, 2m drop-proof), Two-Way Intelligent Noise Reduction, Dual PTT Design, Floating Design.
Figure 1: Retevis RB48A Walkie Talkie highlighting its robust features.
Retevis RB48A Walkie Talkie showcasing its professional outdoor-grade protection. Features include IP67 waterproof (1m depth for 30 minutes), IP67 dustproof (against 0.1µm dense dust), and 2m drop-proof (TPE + PC rugged material).
Figure 2: Professional Outdoor-Grade Protection features of the RB48A.
Retevis RB48A Walkie Talkie floating on water, with images of people boating and rafting. Text highlights 'Floating Design', 'Easy to locate quickly', and '24-Hour Float Test'.
Figure 3: Floating Design for easy retrieval if dropped in water.

Battery Information

Charging Precautions

New batteries or those unused for extended periods should undergo two to three charge/discharge cycles to reach optimal capacity. Charge or replace the battery when low power is indicated.

  • Do not short-circuit battery terminals or dispose of batteries in fire. Do not disassemble the battery pack.
  • Charge between 0°C and 40°C. Charging outside this range may prevent proper charging.
  • Turn off the radio while charging to avoid interference.
  • Avoid disconnecting the power source or battery during the charging.
  • Replace the battery if usable time significantly reduces even after a full charge.
  • Do not disconnect and reconnect a fully charged battery for recharging, as this may shorten battery life.
  • Ensure the battery and radio are dry before charging.
  • Charge in a well-ventilated area, away from flammable materials and heat sources.
  • Do not charge for more than 8 hours. Disconnect the charger when the device is fully charged to prevent overcharging.

Compatible Battery Types

Use only batteries specified by Retevis. Using other batteries may cause explosion or personal injury.

Charging Procedure

Note: Always turn off the radio while charging.

  1. Desktop Charger: Insert the radio with the battery attached into the desktop charger, ensuring good contact. The red indicator light will illuminate, indicating charging. When the light turns green, the battery is fully charged. Unplug the charger and remove the battery.
  2. Type-C Charging: Use a standard DC 5V charger. Insert the Type-C cable into the radio's Type-C port. A steady red light indicates charging. When it turns blue, the battery is fully charged. Disconnect the cable and charger.
Retevis RB48A Walkie Talkie showing battery endurance. It has a 2000mAh battery, 23h use time (5% transmission, 5% reception, 90% standby), >70h standby time, Type-C charging, and power saving mode. Comparison shows RB48 has 17h use time, while RB48A has 23h, a 35% increase.
Figure 4: All-Day Battery Endurance and Type-C Charging.

Accessory Installation

Attaching/Detaching the Belt Clip

To attach, screw the provided belt clip into the screw holes on the back of the battery pack. To detach, unscrew the two screws.

Attaching the Wrist Strap

Thread the wrist strap through the loop on the radio.

Getting to Know Your Radio

Retevis RB48A Walkie Talkie showing its front, side, and back views.
Figure 5: Front, side, and back views of the RB48A Walkie Talkie. (Refer to the list below for labeled components)
  1. Antenna
  2. External Headphone Jack
  3. Power / Volume Adjustment Knob
  4. Indicator Light
  5. Front PTT Key
  6. Microphone
  7. Speaker
  8. Type-C Charging/Data Port
  9. Side PTT Key
  10. Channel +/Programmable Key (PF1)
  11. Channel -/Programmable Key (PF2)

Key Functions

  • PF1 Key (Channel +/Programmable Key):
    • Short Press: Channel Up.
    • Long Press: Configurable for Monitor, Scan, Alarm, Noise Reduction, VOX, Power Switching, Weather, Channel Lock. Default: Toggle Noise Reduction ON/OFF.
  • PF2 Key (Channel -/Programmable Key):
    • Short Press: Channel Down.
    • Long Press: Configurable for Monitor, Scan, Alarm, Noise Reduction, VOX, Power Switching, Weather, Channel Lock. Default: Local alarm.
  • PTT Key (Push-To-Talk): Press and hold to transmit, release to receive.

Basic Operation

Power ON/OFF / Volume Adjustment

Turn the volume/power knob clockwise until a "click" is heard to power ON. The radio will announce a beep tone. Continue turning clockwise to increase volume. Turn counterclockwise to decrease volume. A "click" sound when turning counterclockwise indicates power OFF.

Making a Call

Press and hold the PTT key to transmit; the indicator light will glow red. Speak into the microphone. Release the PTT key to receive; the indicator light will glow green when receiving a signal.

Channel Adjustment

Short press the PF1 key to increase the channel. Short press the PF2 key to decrease the channel.

Low Battery Alert

When the radio announces "Low battery, please charge" and the indicator light flashes red, the battery voltage is below the operating level. Charge the radio battery.

Feature Overview

  • Channel Adjustment
  • Low Battery Alert
  • Time-Out Timer (TOT)
  • Busy Channel Lockout
  • Monitor Function
  • Scan Function
  • Alarm Function
  • Power Level Switching
  • VOX Function
  • Channel Lock
  • Weather Alert
  • Dual PTT
  • Two-Way Noise Reduction
  • Keypad Tone/Voice Announcement

Advanced Features

Time-Out Timer (TOT)

Prevents the radio from occupying a channel for too long and protects against damage from prolonged transmission. If transmission exceeds the preset time limit, the radio will stop transmitting and emit a continuous "beep" tone until the PTT key is released.

Busy Channel Lockout

When enabled, pressing the PTT key while receiving a signal will prevent transmission and generate a blocking tone until the PTT key is released.

Monitor

Press and hold the PF1 or PF2 key (if configured for Monitor) to activate monitor mode. The radio will announce "Monitor ON". This allows listening for activity on the selected channel. If no signal is present, a "hiss" sound will be heard. Press the key again to deactivate monitor mode ("Monitor OFF").

Scan

Press and hold the PF1 or PF2 key (if configured for Scan) to start scanning. The radio will announce "Start scanning" and the green light will flash. When a signal is received, scanning pauses to output the signal and resumes after the signal ends. Press and hold the key again to stop scanning and exit scan mode.

Alarm

Press and hold the PF1 or PF2 key (if configured for Alarm) to activate the alarm. For a local alarm, the radio will sound a siren. For a remote alarm, the radio will sound a siren and transmit an alarm signal to other radios. Press the configured key or PTT key again to cancel the alarm.

Note: When noise-canceling is active, incoming distress signals from teammates may not be received.

Two-Way Noise Reduction

Press and hold the PF1 or PF2 key (if configured for Noise Reduction) to toggle the function ON/OFF. "Noise Reduction ON" eliminates background environmental noise during transmission, preserving only the human voice. Press and hold again to hear "Noise Reduction OFF" and deactivate the function.

Retevis RB48A Walkie Talkie demonstrating advanced noise reduction in a noisy outdoor environment. Text indicates 'Noise Reduction Chip & 2W Speaker', 'Boosts SNR by 25db', 'Filter wind noise and ambient noise'.
Figure 6: Advanced Noise Reduction for clear audio in outdoor environments.

Power Level Switching

Press and hold the PF1 or PF2 key (if configured for Power Switching) to toggle between High and Low power. The radio will announce "High power" or "Low power" accordingly.

VOX ON/OFF

Press and hold the PF1 or PF2 key (if configured for VOX) to toggle the function ON/OFF. The radio will announce "Voice control ON" or "Voice control OFF" accordingly.

Channel Lock

Press and hold the PF1 or PF2 key (if configured for Channel Lock) to toggle the function ON/OFF. "Channel lock ON" locks the current channel and keypad. "Channel lock OFF" unlocks them.

Weather Alert

Press and hold the PF1 or PF2 key (if configured for Weather Alert) to activate "weather mode ON". This function allows the radio to respond to NOAA Weather Radio emergency broadcasts. A special alert tone will sound, and the weather receiver will activate to provide immediate weather and emergency information. Short press the Channel + or Channel - key to select from 1 to 11 available weather channels. Press and hold the configured key again to hear "weather mode OFF" to save settings or exit weather mode.

Refer to the Weather Channel Frequency Table below for details.

Weather Channels and Frequencies
Channel Frequency Channel Frequency
WX1162.550MHzWX7162.525MHz
WX2162.400MHzWX8161.650MHz
WX3162.475MHzWX9161.775MHz
WX4162.425MHzWX10161.750MHz
WX5162.450MHzWX11162.000MHz
WX6162.500MHz
Retevis RB48A Walkie Talkie showing extended range capabilities. Ranges are listed as: Urban 0.5-1 mile, Suburban 0.75-1.2 miles, Open outdoor 0.75-2 miles. The image shows a person using the radio in a mountainous outdoor setting.
Figure 7: Extended Range capabilities for various environments.

CTCSS/DCS Lists

The radio supports CTCSS (Continuous Tone-Coded Squelch System) and DCS (Digitally Coded Squelch) for filtering unwanted communications. Below are the available codes:

CTCSS CHART (Hz)

Number Frequency Number Frequency Number Frequency Number Frequency
1671197.421136.531192.8
271.91210022141.332203.5
374.413103.523146.233210.7
47714107.224151.434218.1
579.715110.925156.735225.7
682.516114.826162.236233.6
785.417118.827167.937241.8
888.51812328173.838250.3
991.519127.329179.9
1094.820131.830186.2

DCS CHART (Hz)

Number DCS-N Number DCS-N Number DCS-N Number DCS-N
39D023N60D143N81D315N102D532N
40D025N61D152N82D331N103D546N
41D026N62D155N83D343N104D565N
42D031N63D156N84D346N105D606N
43D032N64D162N85D351N106D612N
44D043N65D165N86D364N107D624N
45D047N66D172N87D365N108D627N
46D051N67D174N88D371N109D631N
47D054N68D205N89D411N110D632N
48D065N69D223N90D412N111D654N
49D071N70D226N91D413N112D662N
50D072N71D243N92D423N113D664N
51D073N72D244N93D431N114D703N
52D074N73D245N94D432N115D712N
53D114N74D251N95D445N116D723N
54D115N75D261N96D464N117D731N
55D116N76D263N97D465N118D732N
56D125N77D265N98D466N119D734N
57D131N78D271N99D503N120D743N
58D132N79D306N100D506N121D754N
59D134N80D311N101D516N

Main Frequency Chart (FRS Version)

The Retevis RB48A FRS version operates on the following frequencies and power levels:

CH NO Frequency(MHz) Power CTCSS/DCS
1462.56252W67
2462.58752W118.8
3462.61252W127.3
4462.63752W131.8
5462.66252W136.5
6462.68752W141.3
7462.71252W146.2
8467.56250.5WD243N
9467.58750.5WD031N
10467.61250.5WD043N
11467.63750.5WD047N
12467.66250.5WD051N
13467.68750.5WD054N
14467.71250.5WD115N
15462.55002W123
16462.57502WD734N
17462.60002WD315N
18462.62502W127.3
19462.65002WD243N
20462.67502WD606N
21462.70002WD723N
22462.72502W136.5

Applicable countries for FRS Version: USA, Canada, Mexico, Brazil, etc.

Specifications

Feature Specification
Frequency RangeFRS
Number of Channels22
Audio Distortion<5%
Frequency Stability±2.5ppm
Maximum Frequency Deviation≤2.5KHz
ModulationFM
Reference Sensitivity≤0.25uV/0.3uV
Squelch Opening Sensitivity≤0.2uV/0.25uV
Transmit Power2W
Adjacent Channel Selectivity≥65dB
Spurious Response Rejection≥70dB
Intermodulation≥60dB
Current Consumption≤1.4A
Operating Voltage3.7V DC

Maintenance

Battery Care and Storage

  • Recharge batteries when they reach approximately 20% capacity.
  • For ideal long-term storage, charge batteries to 60-80%. Do not store them empty.
  • If the device or battery is unused for over seven days, perform regular maintenance checks and recharge periodically to maintain optimal levels.
  • Store batteries in a cool, dry place, between +10°C and +25°C, never exceeding +30°C.
  • Avoid storing near radiators, boilers, direct sunlight, or extreme humidity.

General Care

  • Keep the radio dry. If it gets wet, wipe it with a cloth before charging or operating.
  • Do not attempt unauthorized modifications or adjustments. These can void your warranty and violate regulations.
  • Clean the radio with a soft, damp cloth. Do not use harsh chemicals or solvents.

Troubleshooting

This section addresses common issues you might encounter with your Retevis RB48A Walkie Talkie. If you experience problems not listed here, or if the suggested solutions do not resolve the issue, please contact Retevis customer support.

Problem Possible Cause Solution
Radio does not power on. Battery is depleted or not properly installed. Charge the battery. Ensure the battery is correctly seated.
Cannot transmit or receive. Incorrect channel, out of range, or Busy Channel Lockout is active. Verify channel settings. Move closer to other radios. Check if Busy Channel Lockout is enabled.
Poor audio quality or static. Weak signal, interference, or noise reduction settings. Move to an area with better signal. Adjust noise reduction settings (toggle ON/OFF).
Battery drains quickly. Battery nearing end of life, or frequent/long transmissions. Replace battery if old. Reduce continuous transmission time. Ensure power level is appropriate for use.
Radio gets hot during use. Prolonged transmission. Avoid continuous transmission for extended periods. Allow the radio to cool down.

User Tips

Here are some tips to enhance your use of the Retevis RB48A:

  • Optimize Battery Life: While the RB48A has excellent battery endurance, remember to utilize the power-saving mode and ensure you're using the appropriate power level (High/Low) for your communication needs to maximize usage time.
  • Clear Communication: The two-way intelligent noise reduction is a significant feature. Experiment with it in different noisy environments to find the optimal setting for clear audio.
  • Outdoor Reliability: Take advantage of the IP67 waterproof and dustproof rating. Don't hesitate to use it in challenging weather conditions, but always ensure the Type-C port cover is securely closed. The floating design is a great safety net for water activities.
  • Range Management: Be aware of the typical range limitations in different environments (urban, suburban, open outdoor) to set realistic expectations for communication distance.

Regulatory Compliance Information

Unauthorized Modification and Adjustment

Changes or modifications not expressly approved by the party responsible for compliance may void the user's authority to operate this radio. Transmitter adjustments should only be made by or under the supervision of a technically qualified person. Replacement of any transmitter component not authorized by local government radio management departments could violate regulations.

FCC Compliance Information

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class A digital device. It generates, uses, and can radiate radio frequency energy. If not installed and used according to the instruction manual, it may cause harmful interference to radio communications. Operation in a residential area is likely to cause harmful interference, requiring the user to correct it at their own expense.

ISED Compliance Information (Licence-exempt radio apparatus)

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage; (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

RF Exposure Safety

This two-way radio uses electromagnetic energy. Improper use can cause biological damage. Refer to http://www.who.int/en/ for information on RF energy exposure limits. Transmit no more than 50% of the time. To reduce exposure:

  • Reduce the amount of time spent using your wireless device.
  • Use a speakerphone, earpiece, headset, or other hands-free accessory to reduce proximity to the head.
  • Increase the distance between wireless devices and your body.

This radio is designed for "Occupational/Controlled Use Only," meaning users must be aware of hazards and ways to minimize them. It is not intended for general population/uncontrolled environments.

Hand-held Mode

To control exposure and ensure compliance, always adhere to the following:

  • To receive calls, release the PTT button.
  • To transmit (talk), press the Push-to-Talk (PTT) button in front of the face.
  • Hold the radio in a vertical position with the microphone (and other parts of the radio including the antenna) at least one inch (2.5 centimeters) away from the nose or lips.

Electromagnetic Interference/Compatibility

Nearly every electronic device is susceptible to EMI. During transmissions, your radio generates RF energy that can cause interference. Turn off the radio in areas where signs are posted (e.g., hospitals, healthcare facilities).

Persons with pacemakers, implantable cardioverter defibrillators (ICDs) or other active implantable medical devices should:

  • Consult with their physicians regarding potential interference from radio frequency transmitters.
  • Turn the radio OFF immediately if interference is suspected.
  • Do not carry the radio in a chest pocket or near the implantation site; carry or use it on the opposite side of the body.

Hearing Aids: Some digital wireless radios may interfere with hearing aids. Consult your hearing aid manufacturer for alternatives.

Other Medical Devices: Consult the manufacturer of your device to determine if it is adequately shielded from RF energy.

Turn off your radio in the following conditions:

  • Prior to entering any area with a potentially hazardous or explosive atmosphere. Only "Intrinsically Safe" radios should be used in such areas.
  • Potentially explosive atmospheres include blasting caps, blasting areas, inflammable gas, dust particles, metallic powders, grain powders, fueling areas, and areas where the air contains chemicals or particles.

Use of Communication Devices While Driving

  • Always check local laws and regulations regarding radio use while driving.
  • Give full attention to driving and the road.
  • Use hands-free operation if available.
  • Pull off the road and park before making or answering a call if required by driving conditions or regulations.
  • Do not place a portable radio in the area over an airbag or in the airbag deployment area.

Protect your hearing

CAUTION: Exposure to loud noises from any source for extended periods may temporarily or permanently affect your hearing. The louder the radio's volume, the less time is required before your hearing could be affected. Hearing damage from loud noise is sometimes undetectable at first and can have a cumulative effect.

  • Use the lowest volume necessary.
  • Limit the amount of time using headsets or earpieces at high volume.
  • When using the radio without a headset or earpiece, do not place the radio's speaker directly against your ear.
  • Use carefully with earphones; excessive sound pressure can cause hearing loss.

Batteries Safety Information

  • Usable extinguishing agent: water, dry power, carbon dioxide.
  • Store batteries in a cool, dry place (10°C to 25°C, never exceeding 30°C).
  • Avoid storing near radiators, boilers, direct sunlight, or extreme humidity.
  • Turn off the radio before removing or installing a battery.
  • Dispose of used batteries immediately and safely.
  • Battery supply terminals are not to be short-circuited.
  • Do not dismantle, open, or shred batteries. Only trained people should dismantle batteries.
  • Do not force discharge, recharge, disassemble, heat above 55°C, or incinerate.
  • Rechargeable batteries should be charged between 10°C and 40°C. Charging below 0°C is prohibited.
  • Rechargeable batteries are only to be charged by adults. Non-rechargeable batteries are not to be recharged.
  • The adapter plug is the disconnect device. The socket-outlet should be near the equipment and easily accessible.
WARNING: CHOKING HAZARD - Small Parts. Not suitable for children under 3 years old.

Warranty and Support

Guarantee Information

Most new products carry a two-year manufacturer's warranty from the date of purchase. To obtain warranty service, you will need to provide proof of purchase from the original seller.

Exclusions from Warranty Coverage:

  • Product damaged by accident.
  • Misuse or abuse of the product, or unauthorized alterations/repairs.
  • If the serial number has been altered, defaced, or removed.

This guarantee card should be kept by the user; no replacement if lost.

Authorized Accessories and Support

Shenzhen Retevis Technology Co., Ltd.
7/F, 13-C, Zhonghaixin Science&Technology Park, No.12 Ganli 6th Road, Jihua Street, Longgang District, Shenzhen, China

Disposal Information

The crossed-out wheeled-bin symbol indicates that all electrical and electronic products, batteries, or accumulators must be taken to designated collection locations at the end of their working life. Do not dispose of these products as unsorted municipal waste. Remove and immediately recycle or dispose of used batteries according to local regulations and keep away from children. Do NOT dispose of batteries in household trash or incinerate.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.