FREDORCH Dual Control Premium Sex Machine User Manual

1. Safety Information

WARNING:

• The cable version must install the governor to turn on power, otherwise it will automatically jump protection.
• It is strictly forbidden to place hands or limbs on the rotating rocker arm in use, so as to guard against mechanical bites.
• The machine is very powerful and does not support the use of glassware in order to prevent damage to the human body.
• The machine has three overcurrent protection. If the machine stops running, it only needs to unplug the power supply for 30 seconds and turn on again.
• This machine is strictly forbidden for minors under the age of 18. Please use this product within the scope permitted by law.

Always ensure the device is stable and securely positioned before use. Disconnect power when not in use or during maintenance.

2. Package Contents

Depending on the model (F7S or FR2) and control version (One Control or Dual Control), your package may include:

• 1 X F7S OR FR2 Sex Machine
• 2 X T-Bar (Frame support)
• 1 X tie rods with "quick joint" (FR2 model)
• 2 X tie rods with "quick joint", one shorter (30cm), the other longer (50cm) (F7S model)
• 1 X Power supply package (with appropriate plug for your country)
• 1 X Speed controller/Remote
• 1 X Instructions and hidden packaging

Note: The exact number of accessories is based on the specific product variant purchased, as shown in the product images.

3. Specifications

3.1. 120W F7S Sex Machine

3.2. 80W FR2 Sex Machine

4. Setup

4.1. T-Bar Bracket Installation

1. Insert the long pipe into the short pipe clamp and reinforce it by twisting the screw clockwise with the inner hexagonal wrench.
2. Reversely loosen the quick pipe clamp wrench, insert the pipe bracket into the fast pipe clamp and pull the fast pipe clamp wrench to lock it.

The small screw can adjust the tightness of the quick pipe clamp and adjust itself according to the need.

4.2. Attaching the Sucker Rod

3. Install the self-locking fast joint on the sucker rod. Joints and rods are threaded joints; joints are twisted clockwise into rod threads, butterfly screw is counterclockwise reinforced joints.
4. Install the sucker rod on the main engine. One end of the extension rod thread is inserted into the main engine through the main engine casing and connected with the sliding block in the main engine, and then screwed into the sliding block thread hole clockwise.

4.3. Power Supply and Speed Regulator Installation

5. Install the power plug and governor into the corresponding plug of the control box.

4.4. Adjustments

The machine features adjustable multiple angles and strokes. The fast pipe clamp at the motor end can be rotated 180 degrees and locked backward, and the pipe support can be assembled in an I-shape for various postures. The angle can be adjusted from -45° to 90° to fulfill various posture needs. The stroke length can be adjusted from 1-15cm.

The device also supports a double rod socket, allowing two players to use it simultaneously.

5. Operating Instructions

5.1. Control Methods

The machine offers two main control versions:

• **One Control**: Uses either a wired speed controller OR a wireless remote.
• **Dual Control**: Uses both a wired speed controller AND a wireless remote.

5.2. APP Version Model Operation

1. **Download the dedicated software**: Scan the QR code with your mobile phone to download the software. Open it in your browser, and the download will be completed. Find the APP icon on your phone's home screen and click to open the APP.
2. **Account registration and login**: Apple mobile phone users can directly log in with their ID. Other users need to register an account by entering their email and password.
3. **Connect the device**: Turn on Bluetooth, enter the main interface, and click "Add Device". Scan the device code or enter the binding code "1150009". Once "Connection Successful" is displayed, the device can be used.

5.3. Operating Modes (APP Version)

• **Official Mode**: A pre-set frequency conversion mode by the system. Clicking on the mode allows you to switch between different frequency conversion frequencies.
• **Swipe Mode**: Slide your finger up and down to change the machine's extension speed. Sliding down sets a low speed, while sliding up sets a high speed. For a satisfactory mode, click the save button in the upper right corner. You can save the mode you just swiped by entering a name and calling it next time. Saving all modes enables three different operation methods: individual, loop, and random.
• **Voice Control Mode**: Click to turn on the voice control switch. The machine can accept voice volume instructions. The louder the voice, the faster the machine runs.
• **Video Mode**: In this mode, you can call up the mobile phone video and run the machine while watching the video.

5.4. Voice Command Instructions (APP Version)

To activate voice control, call out "Xiao Yi, Xiao Yi".

• **Move**: Machine starts (say "Move" once to switch to a different mode).
• **Stop**: Machine stops.
• **Faster**: Machine accelerates.
• **Slower**: Machine decelerates.
• **Gentle Mode**: Low-speed variable frequency mode.
• **Flirtatious Mode**: Medium-speed variable frequency mode.
• **Macho Mode**: Medium-high speed variable frequency mode.
• **Crazy Mode**: High-speed variable frequency mode.

Note: If the device is idle for less than one minute, there is no need to call out "Xiao Yi" again. If it has been idle for more than one minute, you need to call out "Xiao Yi" again. Long press on the remote control to gradually adjust the speed, and short press once for a sudden change in speed. Combining these can achieve stepless speed adjustment.

5.5. Remote Control

The wireless remote control features buttons for speed adjustment (+up, -down), pause, and multiple frequency modes. A single key allows switching between more than a dozen modes, offering automatic speed, fast, slow, and high-speed options.

5.6. Noise Level

The advanced guide rails and whisper-quiet motor allow the device to deliver quality comfort at any speed. Normal operation of the machine reaches 30 decibels, which is like whispering to the ear.

5.7. Product Video Overview

Watch this video for a visual guide on the product's features and operation:

6. Maintenance

To ensure the longevity and hygiene of your sex machine, follow these maintenance guidelines:

• **Cleaning**: After each use, disconnect the power supply. Clean all attachments and the parts of the machine that come into contact with them using warm water and a mild, toy-safe soap. Rinse thoroughly and dry completely before storage.
• **Storage**: Store the machine and its accessories in a clean, dry, and discreet place, away from direct sunlight and extreme temperatures.
• **Lubrication**: Periodically check moving parts for smooth operation. If necessary, apply a small amount of silicone-based lubricant to the sliding mechanisms to maintain optimal performance.
• **Inspection**: Regularly inspect the power cord, controller, and all components for any signs of wear, damage, or loose connections. Do not use the device if any damage is found.

7. Troubleshooting

• **Machine stops running**: The machine has three overcurrent protections. If it stops, unplug the power supply for 30 seconds and then plug it back in to restart.
• **Connection issues with APP**: Ensure Bluetooth is enabled on your mobile device and the machine. Verify the binding code "1150009" is correctly entered.
• **Voice control not responding**: If the device has been idle for more than one minute, you need to call out "Xiao Yi, Xiao Yi" again to reactivate voice control.
• **Attachments not secure**: Ensure all quick joints and threaded connections are twisted clockwise and reinforced with butterfly screws (if applicable) to prevent loosening during operation.

8. User Tips

• **Discreet Packaging**: The product is shipped in discreet packaging that does not contain sensitive text, ensuring your privacy.
• **Experiment with Angles**: Utilize the adjustable angle feature (-45° to +90°) to find positions that best suit your needs and preferences.
• **Explore Stroke Lengths**: Adjust the stroke length from 1-15cm (F7S) or 3-9cm (FR2) to customize the intensity and depth of thrusts.
• **Dual Play**: For models with a double rod socket, explore two-player modes for shared experiences.
• **APP Control**: Leverage the APP for advanced control options, including pre-set modes, swipe-based speed adjustments, and voice control for hands-free operation.

9. Warranty and Support

For any issues or inquiries regarding your FREDORCH Sex Machine, please refer to the seller's return and refund policy or contact customer support. Specific warranty details may vary; please consult your purchase documentation for more information.

A user manual in PDF format is available for detailed instructions: User manual (PDF)