AC Adapter for Nintendo DSi/3DS/2DS Series AC Adapter for Nintendo DSi/3DS/2DS Series

Contents

User Manual: AC Adapter Home Wall Power Supply Charger for Nintendo DSi/3DS/2DS Series

Model: AC Adapter for Nintendo DSi/3DS/2DS Series

1. Introduction

This manual provides instructions for the safe and efficient use of your new AC Adapter Home Wall Power Supply Charger. This charger is designed to provide reliable power to your compatible Nintendo handheld consoles.

Compatible Nintendo Models:

  • Nintendo DSi
  • Nintendo DSi XL
  • Nintendo 3DS
  • Nintendo 3DS XL
  • Nintendo 2DS
  • New Nintendo 3DS
  • New Nintendo 3DS XL
  • New Nintendo 2DS XL
Diagram showing universal compatibility of the charger with various Nintendo handheld consoles including DSi, DSi XL, 3DS, 3DS XL, 2DS, New 3DS, New 3DS XL, and New 2DS XL.
Figure 1: Universal Compatibility with Nintendo Handheld Consoles.

2. Safety Precautions

  • Do not expose the charger to water or excessive moisture.
  • Avoid dropping or subjecting the charger to strong impacts.
  • Do not attempt to disassemble or modify the charger.
  • Ensure the power outlet matches the charger's input voltage (AC 100V-240V).
  • Unplug the charger from the wall outlet when not in use or during electrical storms.
  • Keep out of reach of children.

3. Setup and Operation

3.1 Connecting the Charger

  1. Locate the charging port on your Nintendo handheld console.
  2. Insert the small end of the charger cable into the console's charging port. Ensure it is fully seated.
  3. Plug the AC adapter into a standard wall power outlet (100V-240V).
  4. The console should indicate that it is charging (e.g., a charging light will illuminate).
Image showing the charger's small connector being plugged into a Nintendo handheld console.
Figure 2: Connecting the charger to your Nintendo console.
Image showing the charger connected to a Nintendo console, with text indicating 'Standard Charging 3.5h/ per time'.
Figure 3: Standard Charging in progress. A full charge typically takes approximately 3.5 hours.

3.2 Disconnecting the Charger

  1. Once charging is complete, first unplug the AC adapter from the wall outlet.
  2. Gently remove the charging cable from your Nintendo console's port.

4. Maintenance and Care

  • Keep the charger clean and dry. Wipe with a soft, dry cloth if necessary.
  • Store the charger in a cool, dry place away from direct sunlight and extreme temperatures.
  • Avoid sharp bends or kinks in the cable to prevent damage. The cable is designed with stress relief for durability, supporting over 6000 bends.
Diagram illustrating the durability and stress relief design of the charging cable, showing it can withstand over 6000 bends.
Figure 4: Cable durability features, including protective material and stress relief design.

5. Troubleshooting

5.1 Charger Not Working

  • Ensure the charger is securely plugged into both the wall outlet and the console.
  • Try a different wall outlet to rule out a faulty power source.
  • Check the cable for any visible damage. If damaged, discontinue use and replace.
  • Verify that your console is compatible with this charger model.

5.2 Overheating Protection

This charger features a built-in safety protection chip designed to prevent overheating, short circuits, and overcharging. If the charger feels excessively hot, unplug it immediately and allow it to cool down. If the issue persists, discontinue use.

6. Specifications

Feature Detail
Product Name Charger Plug
Input AC 100V - 240V, 50/60 Hz
Output DC 4.6V, 900 mA
Cable Length 3.6 FT / 110 CM
Plug Type American Plug (EU/US Travel compatible)
Material Plastic
Voltage Range No voltage (universal input)
Power Source Wall Outlet
Inbox Adaptor Yes
High-concerned chemical None
Support wireless connection No
Origin Mainland China
Dimensions (L x W x H) 12 cm x 9 cm x 2 cm
Weight 0.06 kg
Image of the AC adapter with an American plug, highlighting its design for 3DS/2DS.
Figure 5: AC Adapter for Nintendo 3DS/2DS.
Image of the AC adapter with detailed specifications for input, output, and cable length.
Figure 6: AC Adapter with detailed specifications.

7. User Tips

  • This charger is compact and lightweight, making it easy to carry for travel or as a backup.
  • It serves as an excellent replacement for damaged or lost original chargers.

8. Additional Resources

For further detailed information and documents, please refer to the official user manual PDF:

View User Manual (PDF)

© 2024. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.