LS VISION LS-Z1-99X

Contents

LS VISION 99X Zoom Outdoor Surveillance Camera User Manual

Model: LS-Z1-99X

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your LS VISION 99X Zoom Outdoor Surveillance Camera. This advanced security camera features 8MP Ultra HD resolution, 99X optical zoom, dual-lens dual-screen monitoring, PIR + AI humanoid detection, full-color night vision, and is solar-powered with built-in batteries. It supports both WiFi and 4G connectivity and is controlled via the UBox App.

LS VISION 99X Zoom Outdoor Surveillance Camera with solar panel

Image: LS VISION 99X Zoom Outdoor Surveillance Camera, highlighting 8MP Ultra HD, 99X Zoom, 4G, WiFi, Built-in Battery, Dual Screen, and IP66 Waterproof features.

2. Safety Information

Disclaimer:

Camera products can only be used for purposes permissible under applicable law and regulations. Misuse of the product for any illegal activities is strictly forbidden. Please comply with the applicable laws and regulations in your country/area.

3. Package Contents

Please check the package contents carefully. If any items are missing or damaged, contact customer support.

Video: Unboxing the LS VISION Solar Powered PTZ Camera, showing the manual, solar panel, accessories, and the camera unit.

The package should contain the following items:

  • 1x PTZ Camera
  • 1x Solar panel
  • 1x User manual
  • 1x Screw kit (including 1x Hexagon spanner, 4x Tapping screws, 2x plastic-cap screws, 6x Hexagon socket screws)
  • 1x USB charge cable
  • 1x Solar panel bracket (as seen in video)

4. Product Overview

Familiarize yourself with the different components of your camera:

Product Diagram

Image: Product diagram illustrating components such as the solar panel, lens, microphone, PIR sensor, SIM card slot, TF card slot, USB charge port, power switch, and reset button.

  • Solar Panel: For continuous power supply.
  • Microphone: For audio input.
  • Lens: Captures video footage.
  • PIR Sensor: Passive Infrared sensor for motion detection.
  • SIM Card Slot: For 4G connectivity.
  • Reset Button: To reset the device.
  • TF Card Slot: For local storage (MicroSD card).
  • USB Charge Port: For charging the internal battery.
  • Power Switch: To turn the device on/off.
  • Universal Bracket: For mounting the camera.
  • Battery: Built-in 21700 type battery.

5. Installation

The camera can be installed in an integrated or separated configuration.

5.1. Integrated Installation

In this setup, the solar panel is mounted directly with the camera.

Integrated Installation Diagram

Image: Diagram showing the camera mounted on a wall with the solar panel attached directly above it. Recommended installation height is approximately 2.6 meters.

5.2. Separated Installation

For optimal solar exposure or discreet camera placement, the solar panel can be mounted separately using an extension cable.

Separated Installation Diagram

Image: Diagram showing the camera mounted on a wall and the solar panel mounted separately with a 3-meter extension cable.

5.3. Installation Process

  1. Prepare Solar Panel: If applicable, splice two solar panels together. Fix the iron plates with special screws under the panel. Finally, install the universal bracket with the correct angle.
  2. Connect Solar Panel to Camera: Connect the solar panel to the camera and fix it with screws at a suitable angle.
  3. TF Card and SIM Card Installation: Open the silicon flap on the camera. Insert the TF card and SIM card into their respective slots. Ensure the silicon flap is securely closed to prevent rain leakage.
  4. Power Connection: Make sure both the camera power cable and the solar panel power cable are connected.

6. App Installation and Registration (UBox App)

The UBox app is required to operate your camera. Follow these steps to install and register:

6.1. App Download

Scan the following QR codes or search for "UBox" in the App Store (for iOS devices) or Google Play Store (for Android smartphones) to download and install the app.

UBox App QR Codes

Image: QR codes for downloading the UBox app for iOS and Android devices.

6.2. App Registration

  1. Open the UBox app. Input your E-mail address and press 'Register'.
  2. Check and select to agree to the agreement. You will receive a verification code in your E-mail inbox. (If you don't find the email, check your spam folder.)
  3. Input the verification code and press 'Next'.
  4. Set a login password. For security, the password requires more than 8 characters and a combination of letters (e.g., uppercase, lowercase, numbers, symbols).
  5. Input your E-mail address and login password, then press 'Login'.
  6. For a better user experience, allow all permissions requested by the app to avoid missing notifications.

7. Device Connection and Setup

  1. Insert SIM Card (for 4G models): Insert the SIM card into the device. Some models may also require antenna installation.
  2. Power On: After powering on the device, wait for about 1 minute until the blue LED light illuminates. Then press 'Next' in the app. If the blue LED does not light up, refer to the troubleshooting section.
  3. Scan UID QR Code: Find the UID QR code on the device and use the UBox app to scan it.
  4. Add Device: Press 'Add Family' in the app, then set the room or position as per reminders. Enter your family name and press 'Next'. Input necessary information like Country and Province, then press 'Done'. Press 'Add a device' to add your smart device.
  5. Device Search: The app will search for the device on the internet, which may take 5-60 seconds.
  6. Finalize Setup: Select the name and device location, then press 'Done'. The device will automatically appear in your device list, indicating successful setup.

8. Operating Instructions

The LS VISION camera offers a range of features accessible through the UBox app:

8.1. Dual Lens Dual Screen Monitoring

View two perspectives simultaneously on your app screen for comprehensive coverage.

Dual Lens Dual Screen

Image: Screenshot of the UBox app showing a dual-screen view with 99X zoom controls and PTZ calibration.

8.2. 99X Zoom Capability

The camera features a powerful 99X zoom, allowing you to view objects up to 2000 meters away with clarity.

99X Zoom Demonstration

Image: Demonstration of the 99X zoom capability, showing a car license plate clearly visible from a distance.

8.3. PIR + AI Humanoid Detection

The camera uses PIR and AI to detect human movement within a 12-meter range, triggering alarms and recordings.

PIR + AI Humanoid Detection

Image: Illustration of PIR + AI Humanoid Detection, showing a person detected in the monitoring area with an alarm message.

PIR Detection Sensitivity Settings:

  • Disabled: PIR detection is off.
  • Low: 7-second delay for PIR detection.
  • Medium: 5-second delay for PIR detection.
  • High: 1-second delay for PIR detection.

It is recommended to set sensitivity to "Disabled" or "Low" in busy environments to reduce false alerts and conserve battery power.

8.4. Automatic Tracking

Enable humanoid detection and tracking function on the app. The camera will automatically track and amplify the view of detected humans.

Automatic Tracking

Image: The camera automatically tracking a person's movement and amplifying the view.

8.5. Full Color Night Vision

The camera provides clear night vision. In black and white mode, when a moving object is detected, the camera automatically switches to white light for full-color night vision.

Full Color Night Vision

Image: Comparison between Color Night Vision and Infrared Night Vision, showing the enhanced detail and color in the former.

8.6. Other App Features

  • Cloud Service: Check and purchase cloud storage.
  • Face Recognition: Check and purchase AI Cloud Facial Recognition.
  • My Friends: Check and add friends list and permissions.
  • Common Settings: Set default voice and resolution for devices.
  • Storage Management: Manage cloud storage or micro SD card recordings.
  • Flip Screen: Adjust video orientation.
  • Environmental Model: Configure environmental settings.
  • Sleep Time: Set the camera's operating schedule to conserve power.
  • Power Frequency: Adjust power frequency settings.
  • LED Indicator: Control the camera's LED indicator.
  • Device Information: View device name, ID, model, firmware version, and manufacturer.
  • Two-way Talk: Speak to visitors and hear their responses.
  • Screenshot & Manual Recording: Capture images and record video directly to your phone's album.
  • Pan/Tilt Control: Manually adjust the camera's viewing angle.

9. Maintenance

  • Battery Care: The camera is equipped with a rechargeable lithium battery. Battery life is affected by the device wake-up time and the number of wake-ups. If the battery is low, charge it immediately.
  • Wi-Fi Signal Strength: Keep the device within range of your Wi-Fi router. Ensure there are no thick or insulated objects between the device and the router that could lead to weak Wi-Fi signals. Maintain a good Wi-Fi signal level for optimal performance.
  • Low Power Consumption: The camera is designed for low power consumption. It wakes up for a few seconds upon detection and then enters standby mode to save power. Adjust the work time in the app settings as needed.
  • Prevent Rain Leakage: Always ensure the silicon flap covering the TF card and SIM card slots is securely closed after installation to prevent water damage.
  • Cleaning: Periodically clean the camera lens and solar panel to ensure clear image quality and efficient solar charging. Use a soft, dry cloth.

10. Troubleshooting

  • Blue LED Not Lighting Up: If the device's blue LED does not light up after power-on, check the power connection and ensure the battery is charged. Refer to the app's configuration notes for further guidance.
  • Missing Verification Code: If you do not receive the app registration verification code, check your email's spam or junk folder.
  • Weak Wi-Fi Signal: Ensure the camera is within optimal range of your Wi-Fi router. Minimize obstructions like thick walls or insulated materials between the camera and router.
  • App Notifications Not Received: For Android users, ensure the UBox app's self-starting function is enabled in your phone settings to receive push messages.
  • Poor Image Quality: Check if the lens is clean and free from obstructions. Ensure sufficient lighting, especially for night vision performance.
  • Motion Detection Issues: Verify PIR detection sensitivity settings in the app. Adjust to a higher sensitivity if detections are missed, or lower if there are too many false alarms.

11. Specifications

Feature Specification
Model Number LS-Z1-99X
Brand Name LS VISION
Resolution 8MP Ultra HD
Zoom 99X
Max Viewing Distance 2000 meters
Connectivity WiFi, 4G
Supported Mobile Systems iOS, Android (UBox App)
Supported Operating Systems No (Primarily mobile app controlled)
Viewing Angle 360°
Lens (mm) 2.8mm
Focal Length 2.8mm
Sensor CMOS, 1/2.8'' Sensor Size
Sensor Brand HISILICON
Technology Infrared, Pan / Tilt / Zoom
Installation Side, Normal
Audio Output 1CH BNC
Alarm Type Local Alarm
PIR Detection Range 12 meters
Waterproof Grade IP66
Power Source Solar Powered, Built-in 10400mAh batteries
Solar Panel Wattage 9 watt
Smart Home Platform Other
Certification CE
Origin Mainland China

12. User Tips

  • Wide Area Coverage: The camera covers a wide area and features excellent night vision. Utilize the preset point setting for direct viewing of specific points.
  • Motion Detection Zones: Designate specific zones in your yard for motion detection. An alarm will sound if anyone enters or passes through these zones.
  • Easy Setup: The setup process is straightforward, especially with the user-friendly UBox app.
  • Durable and Weather-Resistant: The camera's build is durable and weather-resistant (IP66), making it suitable for both indoor and outdoor use.
  • Good Image Quality: Users report good image quality, even in night infrared mode. The clarity is sufficient for monitoring property.
  • Connectivity: The camera offers good connectivity with Wi-Fi networks, especially with good coverage.
  • Dual Perspectives: The dual-lens feature provides two perspectives of the area, enhancing surveillance.
  • MicroSD Storage: The microSD card stores information reliably, even if Wi-Fi connectivity is intermittent.

13. Frequently Asked Questions (FAQ)

Q: How long does the battery last? Is it necessary to connect it to the electrical power?
A: The camera is solar-powered with a built-in 10400mAh battery. Battery life depends on wake-up frequency and PIR detection sensitivity. It is not necessary to connect to electrical power if the solar panel provides sufficient charge. Charge immediately if the battery is low.
Q: Does it support Wifi 5ghz?
A: The camera supports WiFi and 4G connectivity. The provided specifications do not explicitly state support for 5GHz WiFi, typically implying 2.4GHz support.
Q: Does it work with both Wi-Fi and 4G SIM?
A: Yes, the camera is designed to support both WiFi and 4G connectivity, offering flexible installation options.
Q: Has anyone tested the real zoom? Is it really a 99x?
A: The product features 99X zoom, with a maximum viewing distance of 2000m as indicated in product images. User reviews confirm good image quality and effective zoom functionality.
Q: Does this camera support ONVIF protocol?
A: The provided specifications do not explicitly mention ONVIF protocol support.
Q: Is this camera AOV (always on video) or PIR?
A: The camera is designed for low power consumption, waking up for a few seconds upon detection and then entering standby mode. It primarily uses PIR + AI humanoid detection for event-triggered recording, rather than being an "always on video" (AOV) camera.
Q: Is this camera compatible with a French SIM card, e.g., Orange, SFR, Bouygtelecom?
A: The camera supports 4G connectivity. Compatibility with specific carriers depends on the 4G bands supported by the camera and the carrier's network. Please check with your local carrier for band compatibility.
Q: Does the 4G network work with B4 and B28?
A: The provided specifications do not detail the specific 4G bands (such as B4 and B28) supported by the camera.

14. Warranty and Support

This device includes one month of free cloud storage services. If you wish to continue using value-added services after the trial period expires, these can be purchased within the UBox app.

For further details and comprehensive instructions, please refer to the official user manual PDF: User Manual (PDF).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.