1. Introduction
Thank you for choosing the AIFEN A9E 160W Soldering Station. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your device. Please read it carefully before use and keep it for future reference.
Video: Demonstration of the AIFEN A9E Soldering Station's quick heating and temperature adjustment.
The AIFEN A9E is a versatile soldering station designed for rapid heating and precise temperature control, compatible with 115, 210, and 245 series soldering iron handles. It features a maximum power output of 160W, three memory storage keys for frequently used temperatures, and a temperature range of 100°C to 450°C.
Image: AIFEN A9E Soldering Station highlighting its 160W power, fast temperature return, and universal handle compatibility.
2. Safety Attention
WARNING: When the power is on, the soldering iron tip temperature is 100°C-450°C (212°F-842°F). Misuse can cause burns or fires. Please strictly observe the following guidelines:
- Do not touch the metal parts near the soldering iron tip.
- Do not use the soldering iron near flammable materials.
- Inform other workers that the soldering iron tip can cause burns and dangerous accidents.
- Turn off the power when resting or after work.
- When replacing parts or installing the soldering iron tip, turn off the power and wait for the soldering iron tip to cool down to room temperature.
- This product uses rated voltage and frequency. Refer to the label on the back of the machine.
- It is strictly prohibited to use this product when it is damaged, especially if the power cable is damaged.
- This product uses a three-wire grounding plug and must be inserted into a three-hole grounded socket. Do not modify the plug or use an ungrounded three-head adapter, as this may result in poor grounding. If an extension cord is needed, use a grounded three-wire power cord.
- Do not use the soldering iron for any work other than welding.
- Do not knock the soldering tip on the workbench to clean it, as this may seriously damage the soldering tips.
- When replacing parts, use original factory parts.
- Do not tamper with the soldering iron without safety precautions.
- Do not wet the soldering iron, and do not use it when your hands are wet.
- Smoke will be produced during welding; ensure a well-ventilated environment.
- Do not harm the body when using the machine.
- Children are unaware of the dangers of electrical products. Do not use or store this station in a place accessible to children. Do not allow a child to get near or touch this station.
3. Product Features
- High Power Output: 160W for rapid heating and efficient soldering.
- Wide Compatibility: Supports 115, 210, and 245 series soldering iron handles.
- Fast Temperature Recovery: Heats up in 2 seconds and returns to temperature in 1 second.
- Universal Handle: Easy to replace and compatible with various tips.
- Memory Storage: Three programmable memory keys (CH1, CH2, CH3) for quick recall of preferred temperatures.
- Adjustable Temperature Range: From 100°C to 450°C (212°F to 842°F).
- Digital Display: Clear display for actual and set temperatures, with a power progress bar (A9pro feature).
- Integrated Cleaning: Includes a copper wire cleaning ball and a cleaning sponge for tip maintenance.
- Ergonomic Design: Features a soldering iron tip pull-out box and an aluminum bracket for convenience.
2023 Edition A9 Specific Features:
- Increased heating core storage position.
- Enlarged pluggers for improved connectivity.
- Adjustable sleep bracket for convenience.
- Switch position changed from the rear to the left side for easier access.
Image: Detailed diagram of the AIFEN A9E Soldering Station components.
4. Specifications
| Attribute | Value |
|---|---|
| Brand Name | AIFEN |
| Model Number | A9E |
| Origin | Mainland China |
| Input Voltage | AC100-240V 50/60Hz |
| Power | 120W |
| Peak Power | 160W (MAX) |
| Temperature Control Range | 100°C-450°C (212°F-842°F) |
| Compatible Heating Cores | 210/115/245 Tips |
| Package Dimensions (L x W x H) | 24cm x 21cm x 18cm |
| Package Weight | 1.48 kg |
Image: Dimensions of the AIFEN A9E host unit (120mm height, 135mm depth, 140mm width).
Plug Types and Suitable Countries:
Image: Guide to power plug types (US, EU, UK, AU) and their suitable countries. Please verify compatibility with your local socket.
5. Setup Instructions
Note: When connecting and disconnecting the handle, always turn off the power to avoid damaging the control circuit board.
- Connect the handle device to the handle socket on the host machine.
- Install the required heating core/soldering tip into the handle.
- Place the soldering station properly and put the handle on the handle rack.
- Connect the power supply to an appropriate electrical outlet.
- Turn on the power switch. The display window will show "---", indicating the soldering station is in standby mode.
Image: AIFEN A9E Soldering Station with 210-3tips handle and tips.
6. Operating Instructions
6.1. Temperature Adjustment
- Increasing Temperature: Press the '▲' button once to increase the set temperature by 1°C. If you press and hold '▲' for at least one second, the temperature will rise rapidly until you release the button at your desired temperature.
- Decreasing Temperature: Press the '▼' button once to decrease the set temperature by 1°C. If you press and hold '▼' for at least one second, the temperature will fall rapidly until you release the button at your desired temperature.
6.2. Memory Storage and Recall
- Storage: After setting your desired temperature, select the channel (CH1, CH2, or CH3) you wish to save it to. Press and hold the corresponding channel button (e.g., 'CH1') to save the current temperature to that channel.
- Recall: To recall a stored temperature, simply press (for less than 1 second) the desired channel button (CH1, CH2, or CH3). The station will then set the temperature to the stored value.
6.3. Celsius and Fahrenheit Conversion
- In the power-on state, press the 'SET' button once to switch the temperature display between Celsius (°C) and Fahrenheit (°F).
6.4. Key Lock Setting
- When the host is off, press and hold the 'CH1' button, then turn on the power. This action will toggle the key lock function. '🔒' indicates enabled, '🔓' indicates disabled.
6.5. Buzzer Setting
- When the host is off, press and hold the 'CH2' button, then turn on the power. This action will toggle the buzzer sound. '🔊' indicates enabled (with a prompt sound), '🔇' indicates disabled.
6.6. Standby Temperature Setting
- When the host is off, press and hold the 'CH3' button, then turn on the power to enter the standby temperature setting interface.
- Available standby temperatures are: 0°C, 150°C, 180°C, 200°C. (Setting to 0°C will turn off the standby temperature function).
- After setting, short press 'CH3' again to save and exit.
6.7. Wire-Controlled Version Handle Operation (if applicable)
These functions are only available in the wire-controlled version of the A9E; the standard version does not have these functions.
- Handle Temperature Adjustment: In working state, press the temperature adjustment buttons on the handle to increase or decrease the temperature.
- Handle Machine Switch: In working state, press and hold both temperature adjustment buttons on the handle simultaneously to turn on/off the host interface.
7. Maintenance
7.1. Soldering Tip Maintenance
- Optimal Temperature: High temperatures can weaken the tip's function. Always choose the lowest possible temperature for effective soldering. This tip offers excellent temperature recovery, allowing for soldering at lower temperatures to protect sensitive components.
- Regular Cleaning: Use a clean sponge or the copper wire cleaning ball regularly to clean the tip. Oxides and carbides from residual flux can damage the tip, causing welding errors or reducing heat conduction.
- When Not in Use: Do not leave the iron at high temperatures for extended periods when not in use. This can cause the solder on the tip to oxidize, significantly reducing its heat conduction.
- After Use: After each use, clean the soldering iron tip and coat it with a fresh layer of tin to prevent oxidation.
7.2. Checking and Cleaning the Soldering Tip
Note: Do not use a file to remove oxide from the soldering tip.
- Set the temperature to 250°C (482°F).
- Once the temperature stabilizes, clean the tip with a cleaning sponge and inspect its condition.
- If the tinned part of the soldering iron tip shows black oxide, re-tin it with a new tin layer. Then, wipe it with a clean sponge until all oxide is removed, and re-tin it again.
- If the soldering iron tip is deformed or heavily rusted, it must be replaced.
7.3. Heating Core Replacement
This soldering station uses a heating core integrated with the soldering head. To replace:
- Ensure the power is off and the unit has cooled down completely.
- Carefully unplug the old heating core from the handle.
- Insert the new heating core into the handle until it is securely seated.
8. Troubleshooting
- S-E Error: If the heating core is burnt out or not properly seated in the handle, the soldering station will display 'S-E' and emit an intermittent buzzer sound. Ensure the heating core is correctly installed.
- H-A Error: If the heating core is burnt out and short-circuited, the soldering station will display 'H-A' and emit a continuous beeping sound. To resolve this, remove the short-circuited heating core and turn off the power for 3 minutes, then turn it back on.
9. User Tips
- Optimal Operating Temperature: It is recommended that the operating temperature does not exceed 380°C during routine use. Temperatures above 380°C will cause rapid oxidation of the soldering tip, significantly shortening its service life.
- Initial Use Preparation: For initial use, set the temperature to approximately 300°C. Ensure the soldering tip is fully covered with solder and perform a five-minute burn-in to extend its lifespan.
- Tip Care: The soldering tip must not come into contact with water and should be used with high-quality flux. For cleaning, employ cleaning wire or a copper brush. After use, maintain the tip by ensuring it is fully covered in solder.
- Consumable Tips: The soldering tip is a consumable item and should be replaced periodically according to individual usage patterns.
- SE Prompt Clarification: The 'SE' prompt displayed during initial use does not indicate a quality issue; it signifies that the handle has not detected the soldering tip. Correctly installing the tip will eliminate the 'SE' prompt.
- Package Contents: The number of handles and tips included may vary by package. Please check your specific product packaging for details.
Image: Example of the 'SE' prompt on the display, indicating a tip detection issue.
10. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the official documentation provided with your purchase or contact the seller directly. Always use genuine replacement parts to ensure optimal performance and safety.
A detailed user manual in PDF format is available for download: View User Manual (PDF).