1. Introduction
The GGBEE 1006A Infrared PIR Motion Sensor is an intelligent, energy-saving switch designed for automatic lighting control. It integrates a highly sensitive detector and advanced circuitry to provide convenient and practical functions. By utilizing infrared energy from human movement as a control signal, it automatically turns lights on when a person enters the detection field and turns them off when they leave. This sensor can identify day and night conditions and is easy to install, making it suitable for a wide range of applications.
Key Features:
- Intelligent Sensing: Automatic light activation upon presence, deactivation upon absence.
- Dual Detection: Combines Infrared human perception and Microwave Radar for reliable detection.
- Adjustable Settings: Customizable time delay, LUX (ambient light) sensitivity, and SENS (motion sensitivity).
- Wide Compatibility: Compatible with various LED light sources and fixtures, including LED strips, ceiling lights, floodlights, energy-saving lights, and incandescent lamps.
- Durable Construction: Made with high-quality ABS flame-retardant shell for durability.
- Flexible Installation: Features an adjustable rotating pulley to set the sensing angle.
The sensor offers a 120-degree sensing range and a detection distance of 3-8 meters, ensuring comprehensive coverage for various spaces.
2. Specifications
| Parameter | Value |
|---|---|
| Power Source | 110-240V/AC |
| Power Frequency | 50Hz |
| Ambient Light (Adjustable) | 3-2000LUX |
| Time-Delay (Adjustable) | Min: 10sec±3sec, Max: 7min±2min |
| Rated Load (Incandescent Lamp) | 800W |
| Rated Load (Energy-saving Lamp & LED) | 300W |
| Detection Distance (Adjustable) | 3-12m (<24°C) |
| Detection Range | 180° |
| Working Temperature | -20~+40°C |
| Working Humidity | <93%RH |
| Installation Height | 1.8m~2.5m |
| Power Consumption (Work) | 0.45W |
| Power Consumption (Static) | 0.1W |
| Detection Motion Speed | 0.6~1.5m/s |
3. Installation
WARNING: Installation should only be performed by a qualified electrician or experienced person to ensure safety and proper functionality.
Installation Precautions:
- Do not install on unstable or unrest objects.
- Ensure there are no hindrances or moving objects directly in front of the detection window to avoid affecting detection accuracy.
- Avoid installing the sensor near areas with significant air temperature alterations, such as air conditioning vents or central heating units.
- For your safety, do not open the sensor cover if you encounter any issues after installation.
Installation Steps:
- Switch off Power: Before starting any installation, ensure the main power supply to the circuit is switched off.
- Prepare Sensor: Unscrew the nail on the front cover of the sensor. Open the wire hole.
- Wire Routing: Route the power wire and the load wire through the bottom wire hole.
- Mount Base: Fix the bottom part of the sensor to the desired installation position using appropriate screws. The recommended installation height is 1.8m to 2.5m.
- Connect Wires: Connect the power and load wires to the connection-wire column as shown in the wiring diagram below.
- Secure Cover: Fix the front cover of the sensor back into place and screw the nail.
- Restore Power: Switch on the power supply to test the sensor.
Connection Sketch Figure:
Note: The image above shows a general wiring diagram. Ensure correct polarity and secure connections for safe operation.
4. Operation and Adjustable Settings
The GGBEE 1006A sensor features three adjustable knobs for fine-tuning its operation:
- SENS (Sensitivity Adjustment):
- Adjusts the detection sensitivity of the sensor.
- Can be debugged based on the installation environment.
- Turning clockwise increases sensitivity (up to 12m detection distance).
- Turning anti-clockwise decreases sensitivity (down to 5m detection distance).
- Default factory settings generally do not require adjustment.
- TIME (Delay Time Adjustment):
- Selects the delay time for the sensor to turn off after a person leaves the sensing area.
- Adjustable from a minimum of 10 seconds ± 3 seconds to a maximum of 7 minutes ± 2 minutes.
- The time delay is continually added: if a second induction signal is received after the first, the timer resets based on the remaining time of the initial delay.
- LUX (Illuminance Adjustment):
- Determines the ambient light level at which the sensor operates.
- Twist to the Sun position (Max): The sensor will be in a sensing state 24 hours a day, working in both daytime and nighttime.
- Twist to the Moon position (Min): The sensor will only work in ambient light less than 3LUX, meaning it will not operate during the day and automatically enters sensing mode at night.
5. Testing Procedure
After installation, perform the following test to ensure proper functionality:
- Initial Setup:
- Turn the SENS knob clockwise to the maximum.
- Turn the TIME knob anti-clockwise to the minimum.
- Turn the LUX knob clockwise to the maximum (SUN position).
- Power On: Switch on the power. The connected load (light) should not be working initially.
- Preheat: Allow the sensor to preheat for approximately 30 seconds.
- First Induction: Once preheated, move into the sensor's detection field. The load should turn on.
- Delay Test: After the load turns off (following the minimum delay time), wait for 5-15 seconds. Move into the detection field again. The load should turn on.
- No Induction Test: Ensure there are no induction signals in the sensor's field. The load should stop working after its set delay time.
- Night Mode Test (Optional): To test night mode during daylight, turn the LUX knob anti-clockwise to the minimum (MOON position). Cover the detection window with an opaque object (e.g., a towel) to simulate darkness. The load should then work when motion is detected.
Note: When testing in daylight, ensure the LUX knob is set to the SUN position, otherwise the sensor lamp may not work correctly.
6. Troubleshooting
If you encounter issues with your GGBEE 1006A motion sensor, refer to the following common problems and their solutions:
Problem: The connected load (light) does not work.
- Check Wiring: Verify that the power and load connection-wiring is correct according to the installation diagram.
- Check Load: Ensure the connected light fixture or load is in good working condition.
- Check LUX Setting: Confirm that the working light setting (LUX knob) corresponds to the current ambient light conditions. If it's daytime and LUX is set to 'Moon', the sensor will not activate.
Problem: The sensitivity is poor (detection distance is too short or inconsistent).
- Clear Obstructions: Check for any hindrances in front of the detection window that might block the signal.
- Ambient Temperature: If the ambient temperature is too high, it can affect infrared detection.
- Detection Field: Ensure the induction signal source (person) is within the sensor's detection fields.
- Installation Height: Verify that the installation height corresponds to the recommended height (1.8m-2.5m) specified in the instructions.
- Moving Orientation: Ensure the moving orientation of the detected object is correct relative to the sensor.
Problem: The sensor cannot shut off the load automatically.
- Continual Signal: Check if there is a continual signal or constant motion in the detection field, which would keep the light on.
- Time Delay Setting: Verify if the time delay (TIME knob) is set to its longest duration.
- Power Correspondence: Ensure the power of the connected load corresponds to the sensor's rated capacity.
- Environmental Factors: Check if the temperature near the sensor changes significantly, for example, due to an air conditioner or central heating.
7. User Tips
- Optimal Placement: For best performance, install the sensor in an area where motion is expected to cross the detection field rather than move directly towards or away from it.
- Adjusting for Environment: Take time to fine-tune the SENS, TIME, and LUX knobs after installation to match your specific environment and desired operation. Small adjustments can make a big difference.
- Energy Saving: Utilize the LUX setting to ensure the light only activates when truly needed, especially in outdoor or naturally lit areas, to maximize energy savings.
8. Maintenance
The GGBEE 1006A Infrared PIR Motion Sensor requires minimal maintenance. Follow these guidelines to ensure its longevity and optimal performance:
- Cleaning: Periodically wipe the sensor's detection window with a soft, dry cloth to remove dust or dirt that might obstruct its view. Do not use abrasive cleaners or solvents.
- Inspection: Occasionally check the sensor for any visible damage or loose connections.
- Environmental Protection: While designed for various conditions, protecting the sensor from extreme weather conditions (e.g., direct heavy rain, prolonged direct sunlight) can extend its lifespan, especially if installed outdoors.
- Power Cycle: If the sensor behaves erratically, try turning off the power to the circuit for a few minutes and then turning it back on. This can sometimes resolve minor electronic glitches.
9. Warranty and Support
For information regarding warranty coverage, technical support, or service, please refer to the seller's policies or contact the point of purchase. Keep your purchase receipt as proof of purchase.
A user manual in PDF format is also available for download: Download User Manual (PDF)