1. Safety Instructions
Read all instructions before you use this device. Do not make any changes or create settings that are not described in this manual. If physical damage, loss of data or damage is caused by failure to follow instructions, the warranty does not apply.
- To reduce the risk of fire or electric shock, do not expose the device to rain or moisture. Objects filled with liquids, such as vases, should not be placed on this device.
- Do not place this device on soft surfaces such as tablecloths or carpets, otherwise the device could be a fire hazard.
- Do not place this device in areas susceptible to excessive dust and dirt or near any appliance generating a strong magnetic field.
- To prevent overheating, do not block or clog the ventilation holes.
- Never place this device in a confined space. Always leave enough space around this device for ventilation.
- Protect this device from overexposure to direct sunlight, heat, large temperature fluctuations and moisture. Avoid extreme temperatures.
- When this device is running for a long period of time, the surface may become hot. Shut it down immediately and unplug the charger. Resume operation after this device has cooled down.
- Always handle this device with care. Avoid touching the lens. Do not allow children to handle the device without supervision.
- Use attachments or accessories specified by the manufacturer only.
- Avoid extreme vibration as it may damage the internal components.
2. Disclaimer & FCC Statement
Disclaimer
This manual is general instructions. The pictures and functions in this manual should subject to the actual product. Our company is devoting to improve product performance, we reserve the right to modify product functions and interface described in this manual without notice.
Please keep your device properly. We are not responsible for any loss caused by wrong operation of software/hardware or repairing or any other reasons. We are not responsible for any loss of any third party claims.
This manual has been carefully checked by professional engineer, please understand for any inevitable omissions.
FCC Statement
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation.
2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.
3. Package Contents
Ensure all items are present in the package:
- Projector × 1
- Remote Control × 1 (Batteries are not included)
- Power Cable × 1
- HDMI Cable × 1
- Projector User Manual × 1
4. Product Overview
Familiarize yourself with the projector's components and features.
Projector Ports and Buttons
Refer to the diagram below for the location of buttons and ports:
- On/Off Button: Located on the top of the projector.
- IR Receiver: Located on the front and rear of the projector for remote control signals.
- USB Input: For connecting USB devices.
- HDMI Input: For connecting HDMI sources.
- 3.5mm Stereo Jack: For audio output.
- Power Socket: For connecting the power cable.
Mounting Hole
The projector features a single mounting hole with a dual-use design, making it compatible with standard camera tripods and 1/4 inch screw projector tripod stands.
5. Remote Control
The remote control allows you to operate the projector conveniently. Ensure batteries are inserted (not included).
Remote Control Functions:
- Power Switch: Turns the projector on/off.
- Focus: Adjusts image focus manually.
- Mute: Mutes/unmutes audio.
- Switch to mouse control: Activates/deactivates mouse pointer mode.
- OK: Confirms selection.
- Up/Down/Left/Right: Navigation buttons.
- Menu: Accesses projector menu.
- Return: Goes back to the previous screen.
- Home: Returns to the main home screen.
- Volume - / +: Adjusts volume.
Attention:
- Do not submerge the remote control in the water.
- Do not put the remote control near fire or in wet or hot places.
- Do not use old and new batteries together in the remote control.
- Please take the batteries out if not using the remote control for a long time to avoid battery leakage.
- Please point the remote control toward the IR receiver.
- Please use the remote control within 6 meters distance and 30 degree angle.
6. Setup
Getting Started
- Plug the power cable into the projector's power socket and then into a power outlet.
- Press the power button on the projector or the remote control to turn on the projector.
Adjusting Focus
Use the manual focus by pressing the