Koipsse F78

Contents

Koipsse F78 AI-Powered Smart Glasses User Manual

Model: F78

1. Introduction

Thank you for choosing the Koipsse F78 AI-Powered Smart Glasses. These innovative glasses combine stylish eyewear with advanced audio and AI translation capabilities, allowing you to make and receive calls, listen to music, and communicate across language barriers seamlessly. Featuring open-back earpieces, touch controls, and dual speakers, your F78 smart glasses are designed for convenience and clarity.

Koipsse F78 Smart Glasses with icons for call, battery, microphone, HIFI, and sound waves.

Figure 1.1: Koipsse F78 Smart Glasses - Combining eyewear with smart audio features.

2. Safety Information

2.1 General Safety Warnings

  • Do not use for direct observation of the sun.
  • Not for protection against artificial light sources (e.g., solaria).
  • Not for use as eye protection against mechanical impact hazards.
  • Electro-optical sunglare filters/sunglass filters are not for use by individuals susceptible to photosensitive seizures.
  • Not suitable for driving in twilight or at night.
  • This product is intended to protect against the risk of damage to the eyes due to exposure to sunlight (other than during observation of the sun).

2.2 FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Important: Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user's authority to operate the equipment.

3. Package Contents

Please check the package for the following items:

  • Koipsse F78 AI-Powered Smart Glasses
  • Magnetic Charging Cable
  • User Manual (this document)

4. Product Overview

The Koipsse F78 smart glasses feature a classic frame design with integrated technology in the temples. The temples house the touch control areas, speakers, and charging ports.

4.1 Dimensions

Diagram showing product specifications and dimensions of the smart glasses. Front view: 14.6cm/5.75inch total width, 2cm/0.787inch bridge, 5.3cm/2.09inch lens width, 4.6cm/1.81inch lens height, 5.1cm/2.01inch frame height. Side view: 15cm/5.91inch temple length.

Figure 4.1: Product Dimensions

Measurements:

  • Total Width: 14.6 cm / 5.75 inches
  • Bridge Width: 2 cm / 0.787 inches
  • Lens Width: 5.3 cm / 2.09 inches
  • Lens Height: 4.6 cm / 1.81 inches
  • Frame Height: 5.1 cm / 2.01 inches
  • Temple Length: 15 cm / 5.91 inches

5. Setup

5.1 Initial Charging

Before first use, fully charge your smart glasses. The F78 uses dual magnetic suction charging.

  1. Connect the magnetic charging cable to the charging ports located on the inside of each temple.
  2. Connect the other end of the charging cable to a USB power adapter (not included).
  3. The red light on the temples will stay on during charging.
  4. The light will go off when the glasses are fully charged.

A full charge takes approximately 90 minutes. Ensure your charger provides between 2.5W (minimum) and 5W (maximum) for optimal charging speed.

Video 5.1: Product overview showing the smart glasses rotating, highlighting their design.

5.2 Pairing with Your Device

  1. Power On: Simultaneously press and hold the left and right temple touch multifunction areas for 3 seconds to power on.
  2. After powering on, the temples will automatically pair with each other.
  3. Activate Bluetooth: Turn on the Bluetooth function on your mobile phone or other device.
  4. Search for Device: On your phone's Bluetooth settings, search for available devices.
  5. Connect: Select

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.