MOES WS-B-US-L

Contents

MOES Smart Light Switch Instruction Manual

Model: WS-B-US-L

Brand: MOES

Product Description

This switch is a product developed based on Wi-Fi and Bluetooth modules. It is compatible with the Tuya platform and features a single-live and neutral-live wire design. When no neutral wire is available, simply adding a capacitor allows for easy installation without rewiring, ensuring stable operation of this smart switch without worrying about noise from the capacitor. Users can control it locally or remotely by app, manually, or through smart speakers.

MOES Smart Home Intelligent Switch with App Remote Control, Timing, Voice Control, and WiFi Connection.
MOES Smart Home Intelligent Switch with App Remote Control, Timing, Voice Control, and WiFi Connection. Shows the switch and a smartphone displaying the app interface.

Warnings and Safety Information

▲ Risk of Electric Shock

  • Electricity can cause personal injury and property damage if handled improperly. If you are not sure about any part of these instructions, please seek professional assistance from a qualified electrician.
  • Turn off the power at the circuit breaker and test that power is off before wiring.
  • Please disconnect the power supply before installing or removing the device for avoiding irreversible damage on the device from the electric current or some unpredictable problems such as lamp flashing.
  • We recommend you remove the faceplate from the old switch and use an electrical tester to test all wires connected to the switch to ensure there is no voltage in the circuit.
  • You may need to turn off more than one circuit breaker.

Technical Specifications

ParameterValue
ModelWS-B-US-L
Voltage90-240V AC, 50/60Hz
Max. Current8A/Gang/Total 8A
Wireless ProtocolWi-Fi 2.4GHz
Frequency Band2.412-2.484GHz
Maximum Radio Transmit Power<+16dBm

Package List

  • Smart Switch *1
  • User Manual *1
  • Line Sequence Sticker *1
  • Screw *2
  • Wiring Cap *6
  • Panel *1

For a detailed user manual in PDF format, please refer to the official document: MOES Smart Switch User Manual (PDF)

Installation

Important Notes Before Installation:

  • Make sure that the power at the circuit breaker is off before wiring.
  • Two versions are available: Neutral wire required and no neutral needed. Please wire according to the switch you purchased.
  • If you buy a switch version that requires a neutral wire, please confirm your wall box contains a Neutral Wire (typically white). If not, try another location or call a professional electrician.
  • The wire colors indicated in this manual are usual colors and may differ in some houses.
  • Ensure the wire conductors are securely fastened to each wire.
  • Ensure the Wi-Fi signal is steady and normally working before wiring.
  • If you don't have any wiring experience, please call a professional electrician.

Installation Steps:

  1. Step 1: Turn off Power

    Turn off the circuit breaker and use an electrical tester to test the power. Ensure the circuit breaker is off before wiring.

  2. Step 2: Remove the Old Switch

    Carefully remove the old switch from the wall.

    Diagram illustrating the removal of an old wall switch using a screwdriver, with a warning symbol.
    Diagram illustrating the removal of an old wall switch using a screwdriver, with a warning symbol.
  3. Step 3: Identify Wires

    Remove the switch and pull it away from the wall. Identify the Line/Load Wire. (Note: The color of your wire may be different from the color shown in the manual.)

  4. Step 4: Take Pictures and Connect Wires

    Take pictures of the existing wiring for reference. Follow the wiring diagram to connect the switch wires to the wires in the wall box with the wire conductors. Use the provided label stickers to prevent confusion in the wire sequence.

    Diagram showing the connection of switch wires to wall box wires using wire conductors.
    Diagram showing the connection of switch wires to wall box wires using wire conductors.
  5. Step 5: Remove the Panel

    Remove the panel with a screwdriver. (Please do not install with electricity power on)

    Illustration of removing the switch panel with a screwdriver, highlighting the internal components.
    Illustration of removing the switch panel with a screwdriver, highlighting the internal components.
  6. Step 6: Choose Wiring Option

    Choose the appropriate wiring option based on your wall box configuration:

    Option 1: No Neutral Wire Installation (Use Capacitor)

    When to use this method: Your wall box does not have a neutral wire (common in older homes). You must install the included capacitor at the light fixture L1 (not at the switch).

    Wiring diagram for Single Live (No Neutral Wire) installation, showing connections for L, N, and GND, including a capacitor.
    Wiring diagram for Single Live (No Neutral Wire) installation, showing connections for L, N, and GND, including a capacitor.

    Option 2: Neutral Wire Installation (No Capacitor Needed)

    This option is used when a neutral wire is available in your wall box.

    Wiring diagram for Neutral + Live Wire installation, showing connections for L, N, and GND without a capacitor.
    Wiring diagram for Neutral + Live Wire installation, showing connections for L, N, and GND without a capacitor.
  7. Step 7: Finish Installation

    Put the switch into the switch box in the wall. Mount the two side screws. Install the glass panel (install from top down). Finish installation.

App Installation & Setup

Download the MOES App

Download the MOES App from the App Store or Google Play, or scan the QR code below:

QR code for MOES App download
Get it on Google PlayDownload on the App Store

Note: The MOES App is upgraded for more compatibility and features like scene control via Siri, widgets, and scene recommendations. While Tuya Smart/Smart Life App still works, MOES App is highly recommended.

Registration or Login

  1. Download the "MOES" Application.
  2. Enter the Register/Login interface; tap "Register" to create an account by entering your phone number to get a verification code and "Set password". Choose "Log in" if you already have a MOES account.

Complete the wiring of the switch module before pairing.

How to Reset/Re-pair WiFi Device

Long press the switch for 6 seconds until the white indicator on the switch flashes fast. The device will then enter network connection mode.

Important Note:

The switch only supports a 2.4G network. If you have connected to a 5G network, please disconnect the 5G network first and connect to the 2.4G network.

Pairing Steps:

  1. Scan the QR code within the app to configure the network guide.
  2. Enter your Wi-Fi Password and click "Next", then wait for the connection to complete.
  3. Select the device you want to add and click "+".
  4. After successfully adding the device, you can edit its name and enter the device page by clicking "Done".
  5. Click "Done" to enter the device page and enjoy your smart life with home automation.

Operating Instructions

Multi-Control Association (Only for Neutral + Live Wire)

Note: Please confirm you have successfully finished the Wi-Fi link method above for adding this switch to your MOES App before proceeding with association.

  1. Add another smart switch to the same MOES App. (If a smart switch has already been added, proceed to the next step.)
    Note: If your switch requires a neutral wire, there is no need to wire the newly added switch to the light; only L and N are required for wiring. You can then control 1 light with multiple switches in the MOES App. If your switch does not require a neutral wire, you need to follow the wiring instructions to connect the L and light. At this point, you can control the lights simultaneously with multiple switches.
  2. You will see two devices in the app. Click the main switch (e.g., a one-gang switch) to proceed.
  3. Click the icon in the upper right corner and choose "Multi-Control Association", then click "+" in the right corner.
  4. Choose the switch you want to associate and then choose the switch button that you want to control the same light. Go back to the previous page; you will see two items: your main switch and the newly associated switch.
    Note: Please confirm the associated switch is enabled.
  5. You are now able to control your light with two switches. Do not associate another button in the same switch for multi-control.
  6. If you want to add a third or more smart switches to control your light, repeat the steps above. The app will display the result as you associate each new switch.

Voice Control

Devices are compatible with Amazon Alexa and Google Home supported functionalities. Please see our step-by-step guide on the official MOES website for detailed instructions:

https://www.moestech.com/blogs/news/smart-device-linked-voice-speaker

User Tips

No specific user tips were available from the provided data.

Troubleshooting

If you encounter problems installing or operating your device, please review the product data sheet for further assistance:

https://www.moestech.com/blogs/news/ws-b-us-l

Warranty Information

Warranty Period

Products are covered by a 24-month warranty, effective from the date of purchase by a retail customer.

Exercising Warranty Rights

To exercise warranty rights, the purchaser must present:

  1. Warranty card
  2. Proof of purchase (VAT invoice, financial receipt, or other document confirming the actual date of purchase), unless the purchase date of the product comes from the warranty card.

Procedure for Quality Problems

If product quality problems occur within 24 months from the date of receipt, prepare the product and packaging and go to the place or store where you purchased it to apply for after-sales maintenance. If the product is damaged due to personal reasons, a maintenance fee will be charged.

Protection During Delivery

We recommend properly protecting the goods when delivering them to the guarantor. Use the original packaging with padding to ensure safe transportation. If using replacement packaging, ensure the product is adequately protected from damage. Place an appropriate sticker on your packaging indicating the product's susceptibility to impact, such as "Warning Glass".

Response Time

Reported defects covered by the warranty will be considered immediately and no later than 14 days from the date of delivery of the goods to the Guarantor. After checking and determining the legality of the warranty claim, the Guarantor's services will repair the product within a reasonable time, not exceeding 30 days from the date of delivery of the goods to the Guarantor. However, if hard-to-find spare parts are required, this deadline may extend.

Warranty Exclusions

The warranty does not include the performance of maintenance and similar operations specified in the user manual, and users are obliged to do it themselves. The warranty does not cover:

  1. Mechanical damage caused by the user's fault and product defects caused by such damage.
  2. Damage caused by improper use of the product.
  3. Removal of the warranty seal or serial number from the product.
  4. Actions to eliminate physical defects in the product outside of authorized service.
  5. Use of non-original parts and consumables.

Recycling Information

All products marked with the symbol for separate collection of waste electrical and electronic equipment (WEEE Directive 2012/19/EU) must be disposed of separately from unsorted municipal waste. To protect your health and the environment, this equipment must be disposed of at designated collection points for electrical and electronic equipment designated by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences for the environment and human health. To find out where these collection points are and how they work, contact the installer or your local authority.

FCC Compliance Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Support and Contact Information

Follow Us

  • Facebook: @moessmart
  • YouTube: MOES.Official
  • Instagram: @moes_smart
  • Twitter: @moes_smart
  • Website: www.moes.net

UK Representative

EVATOST CONSULTING LTD
Address: Suite 11, First Floor, Moy Road Business Centre, Taffs Well, Cardiff, Wales, CF15 7QR
Tel: +44-292-1680945
Email: contact@evatost.com

EC Representative

AMZLAB GmbH
Laubenhof 23, ESSEN 45326
Email: info@amz-lab.de
Tel: +491745298066
Made In China

Manufacturer

WENZHOU NOVA NEW ENERGY CO.,LTD
Address: Power Science and Technology Innovation Center, NO.238, Wei 11 Road, Yueqing Economic Development Zone, Yueqing, Zhejiang, China
Tel: +86-577-57186815
After-sale Service: service@moeshouse.com

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.