1. Introduction
This MOES PTH-24E device is a versatile 4-in-1 detector designed to monitor carbon monoxide (CO) and combustible gases, along with ambient temperature and humidity. Its plug-in design ensures easy installation and immediate operation, providing continuous protection for your home or premises.
Package Contents:
- PTH-24E Detector × 1
- Instruction Manual × 1
- Replaceable Plug × 1 (EU/US/UK depending on region)

2. Important Safety Information
Please read this manual carefully before installation and use. Keep it for future reference.
- This device is designed for continuous monitoring of CO and combustible gases. It is not a substitute for proper ventilation and maintenance of fuel-burning appliances.
- Do not paint the detector. Paint can clog the sensor openings and prevent the unit from functioning properly.
- Do not block the ventilation openings on the device.
- Test the alarm regularly as described in the 'Operation' section.
- In case of an alarm, immediately follow the instructions provided in the 'Alarm Response' section.

3. Setup
3.1 Plug & Play Installation
The MOES PTH-24E detector is designed for simple plug-and-play installation. No complex wiring or setup is required.
- Select an appropriate wall outlet for installation. Ensure it is not obstructed and is within a suitable monitoring area (e.g., near fuel-burning appliances, living areas).
- Insert the detector directly into the wall outlet. The device will power on automatically.
- The display will illuminate, and the device will begin its self-test and initialization process.

3.2 Replacing the Plug
The detector features a replaceable plug to accommodate various socket types.
- To remove the current plug, locate the 'Disassembling Button' on the back of the unit.
- Press the button and twist the plug (Right Twist to OPEN, Turn Left to LOCK) to detach it.
- Align the desired plug type with the connector on the detector and twist it until it locks securely into place.

4. Operation
4.1 Display Overview
The color LCD display provides real-time information:
- CO PPM: Carbon Monoxide concentration in parts per million.
- GAS S1: Combustible gas level (indicated by a bar graph, Lv1-4).
- Temperature: Current ambient temperature (in °C or °F).
- Humidity: Current relative humidity (in %).
- Alert Icon: Indicates alarm status.
- Sound Icon: Indicates if the audible alarm is enabled or muted.
4.2 Key Functions
The device features intuitive buttons for various controls:

- Top Button (U icon):
- Long Press: Switches the temperature unit between Celsius (°C) and Fahrenheit (°F). - Middle Button (Light icon):
- Short Press: Initiates a self-test of the device.
- Short Press (repeatedly): Adjusts screen brightness through three levels (100%, 50%, 0% - breathing light off).
- Long Press: Flips the screen display 180 degrees for inverted viewing. - Bottom Button (Bell icon):
- Short Press: Toggles the audible alarm sound on/off (mute/unmute).

4.3 Demonstration Video
Watch this video for a visual guide on the detector's features and operation:
5. Alarm System
The detector provides four levels of visual and audible alarms to indicate varying concentrations of CO and combustible gases. The audible alarm is greater than 85dB.

| Level | CO Concentration | Combustible Gas (LEL) | Visual Indicator | Audible Alarm |
|---|---|---|---|---|
| Safety | 0-50 PPM | < 5% LFL (Lv1) | Green indicator light | None |
| Attention | 51-100 PPM | 5% < Lv2 < 8% LFL | Yellow indicator light flashes slowly | Audible alarm (slow) |
| Warning | 101-150 PPM | 8% < Lv3 < 15% LFL | Orange indicator light flashes fast | Audible alarm (fast) |
| Danger | 150-999 PPM | ≥ 15% LFL (Lv4) | Red indicator light flashes fast | Fast audible alarm |
5.1 Alarm Response
If the alarm sounds:
- Immediately move to fresh air outdoors or open all doors and windows to ventilate the area.
- Turn off all fuel-burning appliances.
- Call your gas supplier or fire department.
- Do not re-enter the premises until the alarm has stopped and the area has been deemed safe by professionals.
6. Maintenance
6.1 Cleaning
- Clean the exterior of the detector regularly with a soft, damp cloth.
- Do not use cleaning agents, solvents, or abrasive materials, as these can damage the sensors or casing.
- Ensure the ventilation openings are free from dust and debris.
6.2 Testing
Perform a self-test weekly by short-pressing the middle (light icon) button to ensure the alarm and display are functioning correctly.
7. Troubleshooting
If you experience issues with your detector, please refer to the full user manual (PDF) for detailed troubleshooting steps or contact customer support.
Common Issues:
- No display/power: Ensure the detector is securely plugged into a live outlet.
- False alarms: Ensure the detector is not placed near sources of high humidity, steam, or strong chemical fumes.
- Alarm not sounding during self-test: Contact customer support.
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | PTH-24E |
| Gas Type Detected | Carbon Monoxide (CO), Combustible Gas |
| CO Detection Range | 0~999 PPM (±10%) |
| CO Sound Alarm Range (Default) | 51 PPM |
| Combustible Gas Detection Range | GAS Lv1-4 (Lv4 = 15% LEL) |
| GAS Sound Alarm Range | GAS Lv2 ≥ 5% LEL |
| Temperature Detection Range | -10°C~50°C (±1.5°C) / 14°F~122°F (±2.7°F) |
| Humidity Detection Range | 0%~95% RH (±5%) |
| Input Voltage | 100-220V 50/60Hz |
| Plug Type | Replaceable (EU, US, UK options available) |
| Screen | 2.0' 320*240 IPS Color LCD |
| Shell Material | Flame Retardant ABS Plastic |
| Work Temperature | -10°C~50°C / 14°F~122°F |
| Alarm Sound Level | >85dbs |
| Product Size (with plug) | 105mm (H) x 55mm (D) x 52mm (W) |
| Certifications | UL, CE |
| Battery Included | No |
| Is Smart Device | No |

9. Warranty and Support
9.1 Warranty Information
This product comes with a manufacturer's warranty. Please refer to the warranty card included in your package or the official MOES website for detailed terms and conditions regarding warranty coverage and duration.
9.2 Customer Support
For technical assistance, troubleshooting, or any inquiries regarding your MOES PTH-24E detector, please contact MOES customer support through their official channels. Contact information can typically be found on the product packaging or the official MOES website.