IKSLED PIR-26L

Contents

IKSLED PIR-26L Motion Sensor Switch User Manual

Model: PIR-26L

Introduction

The IKSLED PIR-26L is an adjustable Passive Infrared (PIR) motion sensor switch designed for controlling LED lighting fixtures. It operates on a DC 5-24V power supply and can handle a maximum load of 100W (for 24V systems) or 60W (for 12V systems). This sensor detects human body movement to automatically turn lights on and off, offering adjustable time delay and light sensor modes for customized operation.

Safety Information

WARNING: Please strictly follow these instructions and safety tips, and use the product with caution.

  • This sensor must use a constant voltage DC power supply. Do not use AC power or constant current power.
  • Ensure the input voltage is DC 5-24V.
  • Do not connect devices that exceed the maximum power range: 60W for 12V systems, 100W for 24V systems.
  • This sensor switch is primarily for controlling LED lighting fixtures and is not compatible with fixtures that have their own control system.

Specifications

Attribute Value
Brand Name IKSLED
Model Number PIR-26L
Switch Type Sensor Switch
Product Voltage DC 5V 12V 24V
Material Plastic
Sensing Distance 1-6m (3-20ft)
Sensing Angle 120°
Recommended Installation Hole φ26mm
Certification VDE, RoHS, EMC
Warranty 1 YEAR
PIR Sensor dimensions and sensing angle
Diagram showing the dimensions (25mm height, 35mm diameter, 26mm recommended mounting hole) and 120-degree sensing angle with a 4-6 meter range.

Setup

1. Installation

  • The recommended mounting hole diameter is 26mm.
  • Ensure the sensor is fixed securely to prevent movement during use, which can affect its performance.

2. Wiring Instructions

Please use lamps/light fixtures with a load power less than 100W. One switch controls one lamp, or multiple light fixtures (do not load more than 3 light fixtures).

Wiring diagram for PIR motion sensor switch
Wiring diagram for connecting the PIR sensor to a DC adapter and LED light fixtures. The black wire is Input Negative, red wire is Input Positive, white wire is Output Negative, and red wire is Output Positive.
  1. Connect the DC adapter to the sensor's input: Black wire to Input Negative, Red wire to Input Positive.
  2. Connect the LED light fixture(s) to the sensor's output: White wire to Output Negative, Red wire to Output Positive.
  3. Ensure all connections are secure and correct polarity is maintained.

Operating Instructions

1. Motion Detection

The sensor detects human body infrared movement within a range of 1-6 meters (3-20 feet) and a 120-degree angle. When motion is detected, the connected lights will turn on. When people leave the sensing area, the lights will turn off after the set time delay.

Diagram illustrating motion detection and time adjustable feature
Illustration of the sensor's motion detection: lights turn on when people enter the area and turn off when they leave, with an adjustable time delay.

2. Adjustable Settings

The PIR-26L sensor features adjustable time delay and light sensor modes. These settings are typically adjusted via small switches or potentiometers on the sensor module.

Close-up of PIR sensor with adjustable settings
Detailed view of the sensor's adjustment switches for light sensitivity and time delay.
  • Light Sensor Mode (Adjustable Illumination):
    • Deepdark: Activates only in very low light conditions (<2LUX).
    • Lightdark: Activates in low light conditions (<25LUX).
    • All day: Activates regardless of ambient light levels.
  • Adjustable Time Delay: Sets how long the light remains on after motion is no longer detected.
    • Options typically include 3 seconds, 40 seconds, or 4 minutes.

3. Operational Demonstration

Video demonstrating the PIR motion sensor switch turning an LED light strip on when motion is detected and off after a delay.

Maintenance

  • Keep the sensor lens clean and free from dust or obstructions to ensure optimal performance.
  • Periodically check wiring connections to ensure they remain secure.
  • Avoid exposing the sensor to extreme temperatures or moisture.

Troubleshooting

If the LED light remains on or off after connection, and the switch cannot be controlled, consider the following:

  1. Mismatch of working voltage: Ensure both the adapter and the LED light are compatible with the sensor's DC 3.7V, 5V, 12V, or 24V requirements.
  2. Input/output and Positive/negative poles are reversed: Double-check the wiring diagram and ensure that the input and output positive and negative poles are connected correctly.
  3. Incorrect usage steps or sensor movement: Turn off the power, securely fix the induction switch in place, and then re-apply power. Constant movement of the sensor during use can lead to continuous detection.

User Tips

  • For optimal motion detection, install the sensor in an area where movement is expected across its field of view, rather than directly towards it.
  • Experiment with the time delay settings (3s, 40s, 4min) to find the most suitable duration for your application.
  • Adjust the light sensor mode (Deepdark, Lightdark, All day) based on the ambient light conditions of the installation area to save energy.
  • When connecting multiple lights, ensure the total wattage does not exceed the sensor's maximum load capacity.

Warranty and Support

This product comes with a 1-year warranty.

For more detailed information, including comprehensive diagrams and additional troubleshooting steps, please refer to the official user manual PDF: View User Manual (PDF).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.