1. Product Overview
The Coolo Zigbee Ambient Light Sensor is a smart device designed to detect and monitor ambient light levels (illuminance) in your home. It enables intelligent automation of lighting and other smart home devices based on real-time brightness, enhancing comfort and energy efficiency. This sensor requires a Zigbee gateway (hub) for network connectivity and integration with smart home platforms like Tuya Smart Life, Zigbee2MQTT, and Home Assistant.
2. Package Contents
Please check the package for the following items:
- Zigbee Ambient Light Sensor
- User Manual (PDF available online)
- Mounting accessories (adhesive, bracket for some models)
3. Setup and Installation
Before using the product, please read this manual carefully to ensure correct operation and prevent damage. A Zigbee gateway (hub) is required for network configuration and connection to your smart home application.
3.1 Network Configuration
- Power On:
- Align an opener to the slot on the battery cover.
- Rotate the battery cover anti-clockwise to open.
- Remove the battery insulation film to power on the device.
- Pairing Mode: Press the pairing button for 3-5 seconds and then release. The red indicator light will flash, indicating the sensor is in pairing mode.
- Add to Gateway: Open your Zigbee gateway's application (e.g., Tuya Smart Life, Home Assistant with Z2M) and follow the instructions to add a new device.
3.2 Physical Installation
The sensor offers flexible installation options to suit various environments.
- Choose Location: Select a location where ambient light detection is crucial, such as near a window, on a wall, or on the ceiling.
- Mounting:
- Adhesive Mounting: Remove the protective film from the adhesive on the base and stick the device firmly to a clean, dry surface.
- Magnetic Mounting: Utilize the magnetic base to attach the sensor to metallic surfaces.
- Wall/Ceiling Mounting (with bracket): If your model includes a bracket, secure the bracket to the wall or ceiling with screws (not included) and then attach the sensor. The sensor is 45° foldable and 360° rotatable for optimal positioning.
4. Operation
Once connected to your Zigbee gateway and smart home platform, the sensor will continuously monitor ambient light levels. You can view real-time data and set up automation rules through your smart home app.
4.1 Real-time Monitoring
Access your smart home app to view the current illuminance readings from the sensor. This allows you to track light conditions throughout the day.
4.2 Smart Home Automation Examples
The sensor can trigger various actions based on predefined light thresholds:
- Smart Bulb Linkage:
- If light detected is >300 Lux (Daylight Scene), turn off smart bulbs.
- If light detected is <100 Lux (Night Mode), turn on smart bulbs.
- Auto Curtain Control:
- If brightness threshold is met (>300 Lux), open smart curtains.
- If darkness threshold is met (<50 Lux), close smart curtains.
5. Maintenance
5.1 Battery Replacement
The sensor is powered by a CR2450 DC3V battery. When the battery is low, you may receive a notification in your smart home app. To replace the battery:
- Open the battery cover by aligning an opener to the slot and rotating anti-clockwise.
- Remove the old CR2450 battery.
- Insert a new CR2450 battery, ensuring correct polarity.
- Close the battery cover by rotating clockwise until secure.
5.2 General Care
- Keep the sensor clean and free from dust to ensure accurate readings.
- Avoid exposing the sensor to extreme temperatures or high humidity.
- Do not disassemble the device beyond battery replacement.
6. Troubleshooting
- Device not pairing: Ensure a Zigbee gateway is powered on and within range. Check if the sensor's red indicator light is flashing during pairing mode.
- No data in app: Verify the sensor is successfully paired with the gateway and the gateway is connected to your network. Ensure the smart home app is updated.
- Incorrect readings: Ensure the sensor's light-sensing surface is clean and not obstructed. Reposition the sensor if it's in an area with inconsistent light.
- Compatibility Note: For the "For Z2M" model, it only supports Zigbee2MQTT and cannot work with ZHA (Zigbee Home Automation) or Tuya/Smart Life directly without Z2M.
7. Specifications
| Feature | Specification |
|---|---|
| Product Name | Zigbee Ambient Light Sensor |
| Wireless Protocol | Zigbee 3.0 |
| Detection Range | 0-157K Lux |
| Battery Type | CR2450 DC3V |
| Standby Current | 10µA |
| Working Temperature | -10°C to 55°C |
| Working Humidity | 0% to 95% RH (non-condensing) |
| Product Size | Φ33 x 16mm |
| Certification | CE |
| Smart Home Platform | Tuya (via compatible gateway), Zigbee2MQTT |
| Package Dimensions (approx.) | 8cm (L) x 8cm (W) x 5cm (H) |
| Package Weight (approx.) | 0.033 kg |
8. User Tips
- Optimal Placement: For accurate light detection, place the sensor where it receives ambient light representative of the area you want to monitor, avoiding direct sunlight or shadows from large objects.
- Battery Life: To maximize battery life, ensure the sensor is within good range of your Zigbee gateway to avoid excessive re-connection attempts.
- Automation Rules: Experiment with different Lux thresholds in your smart home app to fine-tune automation rules for lighting, blinds, or other devices to match your preferences.
9. Warranty and Support
This product is covered by a standard manufacturer's warranty. For detailed warranty information, technical support, or to access the full user manual in PDF format, please refer to the official product page or contact the seller directly. A PDF version of the user manual is available for download: User Manual (PDF).