LFMT CNC Rear Passenger Seat Grab Handle

Contents

LFMT CNC Rear Passenger Seat Grab Handle Instruction Manual

Model: CNC Rear Passenger Seat Grab Handle

Brand: LFMT

1. Introduction

This manual provides essential information for the safe and effective installation, operation, and maintenance of your LFMT CNC Rear Passenger Seat Grab Handle. This accessory is designed to provide a secure handhold for passengers on compatible KTM and Husqvarna motorcycles.

Please read this manual thoroughly before installation and use. Keep it for future reference.

LFMT Rear Grab Handle installed on a KTM motorcycle
LFMT Rear Grab Handle installed on a KTM motorcycle.

2. Safety Warnings

  • Compatibility: This product is only compatible with specified motorcycle models. Installation on non-compatible vehicles may cause improper fitment, functional failure, or safety hazards. Refer to the specifications section for compatible models.
  • Professional Installation Recommended: Installation must be performed by a qualified motorcycle technician. While installation is simple, professional expertise ensures correct fitment and safety.
  • Pre-Ride Inspection: Always inspect the part before every ride. Discontinue use immediately if any looseness, deformation, or cracks are detected.
  • Aftermarket Part: This is a non-OEM (aftermarket) part. Its performance may differ from original equipment. Carefully assess your intended usage scenario.
  • No Modifications: Do not weld, drill, grind, or otherwise modify this product. Any unauthorized modifications can compromise the integrity and safety of the grab handle.
  • Intended Use: Some models of this product are not E-mark certified and are intended for off-road or closed-course use only. Do not use on public roads unless explicitly labeled as "E-marked."

3. Specifications

Product Parameters:

Product parameter diagram showing dimensions of the grab handle and mounting bolts
Product parameter diagram showing dimensions of the grab handle (155mm length) and mounting bolts (55mm bolt length, 95mm total length).
Attribute Detail
Brand Name LFMT
Motobike Make KTM, Husqvarna
High-concerned chemical None
Origin Mainland China
Package Dimensions (L x W x H) 16 cm x 8 cm x 3 cm
Package Weight 0.195 kg
Available Colors Black, Orange, Blue

Compatible Models (Fits):

  • For KTM 125-450 SX/SXF/XC/XCF 2019-2023
  • For KTM 150-500 XCW/XCW TPI/EXC TPI/EXC TPI SIX DAYS/ EXC-F/EXC-F SIX 2019-2023
  • For Husqvarna FC250/350/450 2019-2023
  • For Husqvarna FX 350/450 2019-2023
  • For Husqvarna TX300 TC125/250 2019-2023
  • For Husqvarna FE350/S FE501/S 2020-2023
  • For Husqvarna TE 150i 250i 300i 2020-2023

Note: This list is based on manufacturer specifications. Always verify fitment with your specific motorcycle model and year before purchase and installation.

4. Setup (Installation)

The installation of the LFMT CNC Rear Passenger Seat Grab Handle is generally straightforward. However, due to the critical safety nature of motorcycle components, installation by a qualified motorcycle technician is strongly recommended.

General Installation Steps:

  1. Prepare the Motorcycle: Ensure the motorcycle is stable and secure, preferably on a stand. Turn off the engine and allow any hot components to cool.
  2. Identify Mounting Points: Locate the designated mounting points on your motorcycle's rear fender or subframe, typically where existing bolts or covers might be present.
  3. Position the Grab Handle: Align the LFMT grab handle with the mounting points.
  4. Install Bolts: Insert the provided mounting bolts through the grab handle and into the motorcycle's frame. Hand-tighten the bolts initially to ensure proper alignment.
  5. Tighten Securely: Using appropriate tools, tighten the bolts evenly and securely. Do not overtighten, as this can damage the threads or components. Refer to your motorcycle's service manual for specific torque specifications if available.
  6. Final Check: Once installed, firmly check the grab handle for any movement or looseness. Ensure it is rigidly attached and does not interfere with any other motorcycle components or rider/passenger movement.
Black LFMT Rear Grab Handle with mounting bolts
Black LFMT Rear Grab Handle with mounting bolts, ready for installation.
Close-up of the black LFMT Rear Grab Handle installed on a dirt bike, showing mounting points
Close-up of the black LFMT Rear Grab Handle installed on a dirt bike, showing mounting points.

If you do not have the necessary tools or expertise, please seek a professional repair shop for installation.

5. Operating (Usage)

The LFMT CNC Rear Passenger Seat Grab Handle is designed to provide a secure and comfortable handhold for a passenger during motorcycle operation. It enhances passenger stability and confidence.

  • Passenger Grip: Instruct your passenger to firmly grasp the handle with both hands during acceleration, braking, and turns to maintain balance and security.
  • Rider Awareness: As the rider, be aware of your passenger's movements and adjust your riding style accordingly, especially when a passenger is utilizing the grab handle.

6. Maintenance

  • Regular Inspection: Periodically check the grab handle and its mounting bolts for any signs of looseness, wear, corrosion, or damage. This should be part of your routine pre-ride inspection.
  • Cleaning: Clean the grab handle with a mild soap and water solution. Avoid abrasive cleaners or solvents that could damage the finish. Rinse thoroughly and dry.
  • Tighten Fasteners: If any bolts are found to be loose, tighten them to the appropriate torque specifications.
  • Replace if Damaged: If the grab handle shows any signs of significant damage, deformation, or cracking, it must be replaced immediately to ensure passenger safety.

7. Troubleshooting

Common Issues:

  • Grab Handle Does Not Fit:
    • Verify Compatibility: Double-check that your motorcycle's make, model, and year are explicitly listed in the "Compatible Models" section. Some users have reported fitment issues with specific models (e.g., KTM 450 2019, MXF 2021) that may require modifications or may not be compatible despite similar model names.
    • Check for Obstructions: Ensure there are no existing accessories or motorcycle components obstructing the mounting points.
    • Professional Assessment: If you are certain of compatibility and still face issues, consult a qualified motorcycle technician. Forced installation can lead to damage and accidents.
  • Grab Handle is Loose After Installation:
    • Re-tighten Bolts: Ensure all mounting bolts are tightened securely and evenly. Do not overtighten.
    • Inspect Mounting Points: Check the motorcycle's mounting points for any damage or wear that might prevent a secure fit.

8. User Tips

  • Many users appreciate the good quality of this product.
  • Always confirm the exact fitment for your specific motorcycle model and year, as some variations may exist even within listed compatible ranges.
  • Consider professional installation to ensure optimal safety and fit.

9. Manufacturer & Support Information

Manufacturer:

Hubei Lufei Trading Co., Ltd.
Address: Building 3, Unit 2, Yujibinhu Tianxia Lan Yuan, Xiaogan City, Hubei Province, Mainland China
Email: 15058588127@139.com

EU Authorized Representative (EC REP):

Vermilion Bird Ou
Address: Tartu mnt 67/1-13b, Kesklinna linnaosa, Tallinn, Harju maakond, 10115, Estonia
Email: vermilionbird.eu@outlook.com

For additional information or support, please refer to the official product guides and documents available in PDF format: View User Manual (PDF).

10. Disclaimer

The manufacturer and EU Authorized Representative shall not be held liable for any damage, injury, or accident resulting from:

  • Incorrect or unqualified installation.
  • Use beyond the intended scope (e.g., on public roads without E-mark certification, if applicable).
  • Unauthorized modifications to the product.
  • Failure to inspect or maintain the product as instructed in this manual.

This manual may be updated without prior notice. Please refer to the latest version for current information.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.