1. Introduction
This manual provides detailed instructions for the installation and operation of the LEXXSON Wireless CarPlay Android Auto Retrofit Kit. This smart module is designed to upgrade your original car's OEM screen with modern CarPlay and Android Auto functionalities while retaining the factory car system and controls.
2. Product Features
- Adds Wireless/Wired CarPlay and Android Auto functionality.
- Retains original OEM car screen and controls (steering wheel, touch screen, rotary knob).
- Built-in 2.4G and 5.8G WIFI for stable connection and Bluetooth 5.0.
- Supports intelligent voice control (Siri, Google Assistant).
- Compatible with GPS navigation apps like Google Maps, Waze, and Apple Maps with live traffic information.
- Includes 2 RCA inputs for optional aftermarket rear and front cameras (PAL, NTSC, AHD).
- Supports HD 360 panoramic cameras with dynamic guidance lines and Parking Distance Control (OEM parking style).
- Plug and play, non-destructive installation.
- Seamless switching between the original car system and the CarPlay/Android Auto interface.
- USB Video Playback: Directly play video and audio media from a U disk.
3. Compatibility
This retrofit kit is compatible with the following Dodge models equipped with an 8.4-inch screen:
| Car Model | Years | Screen Size |
|---|---|---|
| Challenger | 2013-2016 | 8.4" |
| Journey | 2011-2016 | |
| Charger | 2013-2016 | |
| Durango | 2014-2017 |
4. Kit Contents
The package includes the following items:
- 1 x Dodge CarPlay Unit (Decoder Box)
- 1 x USB Cable
- 1 x Power Harness
- 1 x LVDS Cable
- 1 x Microphone & Aux Cable
- 1 x Wi-Fi Antenna
5. Setup Instructions
5.1 Toggle Switch (DIP) Setup
Locate the toggle (DIP) switches on the decoder box. These switches need to be set according to your car's screen size. For an 8.4-inch screen (640x480 resolution), refer to the diagram below for the correct switch positions.
5.2 Cable Connection
Follow the cable connection chart carefully to ensure all components are correctly wired. Ensure the WiFi antenna is kept away from metal for optimal signal.
Connect the WiFi antenna and USB-AV cable as shown:
5.3 Installation Location
The CarPlay interface decoder box should be installed in an appropriate space near or on the OEM head unit. Examples of suitable locations are shown below:
6. Operating Instructions
6.1 Switching Between OEM and CarPlay Interface
After all cables are connected, you can switch between the original car screen and the CarPlay interface by:
- Long pressing the "Knob Enter" button.
- Long pressing the top left corner (for Left-Hand Traffic) on the touch screen.
- Long pressing the top right corner (for Right-Hand Traffic) on the touch screen.
6.2 Wireless CarPlay Connection
- In the SmartPhone Setting menu, select "Bluetooth".
- Check for the Bluetooth device name starting with "CAR-xxxx".
- Turn on WiFi on your iPhone and keep it on. Return to Bluetooth settings to connect to CarPlay.
- Select the Bluetooth device name "CAR-xxxx" and pair. A request window will pop up; select "Use CarPlay".
6.3 Wireless Android Auto Connection
- In the SmartPhone Setting menu, select "Bluetooth".
- Check for the Bluetooth device name starting with "CAR-xxx" in the Bluetooth interface.
- Click on the Bluetooth name beginning with "CAR-xxx". A pairing request will pop up; click "Pairing".
- After successful Bluetooth pairing, follow the Android Auto connection process on the screen. The system will connect automatically.
6.4 Apple Wireless Screen Mirroring (AirPlay)
- In the SmartPhone Setting menu, select "AirPlay".
- On your iPhone, select the "Wireless LAN" option. The search bar will show "CAR-WIFI-XXX". Click the link; the password is 66668888.
- After successful WiFi connection, return to the main interface of your iPhone, open the shortcut menu page, select "Screen Mirroring", and turn it on.
- After "Screen Mirroring" is turned on, select "AirPlay" to complete the wireless screen mirroring.
6.5 Android Wireless Screen Mirroring (AutoLink)
- Scan the QR code provided in the AutoLink welcome screen using your Android phone's browser to download and install the AutoLink app.
- Switch the WIFI Auto Link to "ON" in the Settings page.
- Open the downloaded AutoLink software, search for "CAR-WIFI-XXXX" and connect. Click "START NOW" on the phone prompt box.
- The media sound of AutoLink needs to connect via Bluetooth.
6.6 Audio Settings and AUX Input
To ensure audio output, plug the AUX cable into the OEM AUX input and switch the audio source to AUX on your car's system.
The system uses Bluetooth audio output from the factory car Bluetooth, which reduces interference and speeds up sound response.
6.7 Intelligent Voice Control
The system supports intelligent voice control for safer driving. Use "Hey Siri" for Apple CarPlay or Google Assistant for Android Auto to control phone functions, navigation, and music.
6.8 Online Navigation
Utilize your favorite navigation apps like Google Maps, Waze, or Apple Maps directly on your car's screen for real-time navigation and traffic information.
6.9 Optional Aftermarket Rear View Camera
The smart module can decode video and supports input from an optional aftermarket rear-view camera, providing a clear view for parking and reversing.
7. Maintenance
To ensure the longevity and optimal performance of your CarPlay/Android Auto retrofit kit, follow these general maintenance guidelines:
- Keep the decoder box and connections clean and free from dust and debris.
- Avoid exposing the unit to extreme temperatures or moisture.
- Ensure all cables are securely connected to prevent intermittent issues.
- Periodically check for firmware updates from the manufacturer to improve performance and add new features.
8. Troubleshooting
8.1 Echo Cancellation (Audio Settings)
If you experience an echo during phone calls, perform the echo cancellation procedure:
- Navigate to Settings > Audio > AEC Delay.
- Click the "Start Auto AEC" button.
- Ensure the car is quiet during this process.
- Set the volume to a moderate position.
- Wait approximately 20 seconds for the estimation to complete.
8.2 Microphone Not Working
If the microphone is not working for calls, Google Assistant, or Siri:
- Check the microphone cable connection to the decoder box (refer to Section 5.2 Cable Connection).
- Ensure the microphone is not obstructed and is positioned correctly.
- Verify that the audio settings (Section 6.6) are configured correctly and the correct audio input is selected.
- If an external microphone was provided, ensure it is properly connected and functioning.
8.3 General Connection Issues
- No display/intermittent display: Check all LVDS cable connections. Ensure the power harness is securely connected.
- Cannot switch to CarPlay/Android Auto: Verify the toggle switch settings (Section 5.1) are correct for your screen size. Ensure the long-press action on the knob or screen corner is performed correctly.
- Wireless connection unstable: Ensure the Wi-Fi antenna is properly connected and not near metal objects. Check your phone's Wi-Fi and Bluetooth settings.
9. Specifications
| Component | Detail |
|---|---|
| Decoder Box Dimensions (L x W x H) | 145mm x 98mm x 27mm |
| Package Weight | 0.904 kg |
| Wireless Connectivity | 2.4G & 5.8G WiFi, Bluetooth 5.0 |
| Video Inputs | 2 RCA inputs (for rear/front/360 cameras) |
| Supported Camera Formats | PAL, NTSC, AHD |
10. User Tips
- For optimal performance, ensure your phone's operating system is up to date before connecting to CarPlay or Android Auto.
- When using screen mirroring, a high-quality data cable can improve stability and efficiency for wired connections.
- If installing a 360-degree camera, ensure all video input cables are correctly routed and connected to the designated RCA inputs on the decoder box.
11. Support
For any issues or further assistance, please contact customer support. To help us provide efficient support, please gather the following information before contacting us:
- Your order ID.
- The exact car model and year.
- The screen size of your car.
- A description of your toggle switch setup.
- Pictures of your LVDS cable connection.
- The software version of your CarPlay decoder (found in the CarPlay decoder menu: Settings > System Version).
A user manual in PDF format is also available for download: View User Manual (PDF)