C-011 C-011

Contents

Nordic Modern LED Ceiling Light Instruction Manual

Model: C-011 | Brand: Generic

Introduction

This manual provides detailed instructions for the safe installation, operation, and maintenance of your Nordic Modern LED Ceiling Light. This lamp is designed for decorative lighting in indoor areas and complies with lighting safety standards. Please read this manual thoroughly before installation and keep it for future reference.

Various designs of Nordic Modern LED Ceiling Lights
Overview of different Nordic Modern LED Ceiling Light designs.

Safety Warnings

  • Keep children away from heated components.
  • Immediately disconnect power if abnormal noises, smoke, or flickering occurs.
  • Do not overload the circuit.

Specifications

Attribute Value
Model NumberC-011
Installation MethodSelf-contained
Luminous Flux249-2000 lumens
Color OptionsGold, Black
Is Smart DeviceNo
FinishIron
Warranty2 years
TechnicsPlated
Application AreaFoyer, Daily Lighting (3-5 square meters)
Switch TypeNone (external switch required)
Number of Light Sources1
MaterialAluminum, Metal + Crystal
Base TypeE27
Light SourceLED bulbs
Power SourceDC
Item TypeCeiling lights
StyleModern Style
Is Bulbs IncludedNo
Body MaterialCRYSTAL
OriginMainland China
CertificationCCC, CE, EMC, LVD, ROHS
Voltage220 V
Is DimmableNo
Lighting Area3-5 square meters
Dimensions of the Black Square model: 10cm height, 13cm width, 17cm depth.
Dimensions for the Black Square model (approx. 10cm height, 13cm width, 17cm depth).

Installation Instructions

Important: Installation must be performed by a licensed electrician.

  1. Turn off the main power supply and verify power is disconnected.
  2. Securely mount the fixture to the ceiling. Do not exceed the ceiling's load-bearing capacity.
  3. Wiring specifications:
    • Live wire → Red
    • Neutral wire → Blue (Note: In some regions, neutral wire may be white. Consult local electrical codes.)
  4. Insulate all wire connections to prevent short circuits.
  5. Maintain a distance of ≥0.5m (1.6ft) between the fixture and flammable materials.

Installation Steps:

  1. Identify a ceiling mounting location, avoiding areas near ventilation ducts or concealed wiring.
  2. Secure the mounting bracket to the ceiling junction box using the included expansion screws.
  3. Connect wires: Connect the power cord of the chandelier to the live wire of the ceiling; connect the blue wire to the neutral wire (white).
  4. Insulate all connections with electrical tape. Ensure no exposed conductors.
  5. Align the fixture with the bracket slot, rotate clockwise to lock. Adjust suspension wire length, trim excess wires with pliers, and retain the desired length.
Video demonstrating the installation process and light effects.

Operating Instructions

Once installed, operate the light using a standard wall switch connected to the circuit. This fixture is not dimmable, so ensure your switch is a standard on/off type.

Square ceiling lights installed in a modern hallway, illuminating the space.
Example of the light in operation, providing illumination in a hallway.

Maintenance

  • Always power off before cleaning.
  • Wipe with a dry, non-abrasive cloth. Avoid chemical cleaners.
  • Replace light sources only after allowing them to cool to room temperature.
  • Ensure terminal tightness every 6 months.

Troubleshooting

Symptom Possible Cause Solution
No illumination Power off / Faulty bulb Check circuit breaker / Replace bulb
Flickering Voltage fluctuations / Loose wiring Contact utility provider / Re-secure connections

User Tips

Based on general user feedback for similar lighting products:

  • Consider the room size and desired brightness when choosing the bulb. As the fixture uses an E27 base, a wide range of LED bulbs are available.
  • For optimal aesthetic effect, ensure the ceiling surface is clean and smooth around the installation area to enhance the light patterns cast by the crystal elements.
  • If installing multiple units in a row (e.g., in a hallway), plan the spacing carefully to create a consistent and appealing lighting design.

Warranty and Support

This product comes with a 2-year warranty from the date of purchase, covering manufacturing defects. For support or warranty claims, please contact your retailer or the manufacturer with your purchase details.

For additional information, you may refer to the official user manual PDF: View User Manual (PDF)

Eco-Friendly Disposal

Dispose of this product per local e-waste regulations. Do not mix with household waste. Proper disposal helps prevent potential negative consequences for the environment and human health.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.