1. Product Overview
The IKSLED Universal Voltage Mirror Touch Switch is a smart controller designed to transform ordinary mirrors into intelligent, touch-sensitive lighting fixtures. It allows for easy control of LED backlighting with touch on/off functionality and stepless brightness adjustment. This controller supports a wide input voltage range, making it suitable for various regions.

2. Safety Information
WARNING: Please strictly follow these instructions and safety tips. Use the product with caution.
- This device operates with high voltage (100V-240V AC input). Ensure all power is disconnected before installation or maintenance.
- Installation should be performed by a qualified individual if you are unsure about electrical wiring.
- Do not expose the switch to water splashes or high humidity, as this can cause malfunction or electrical hazards.
- Ensure the switch is securely fixed and connections are tight to prevent accidental disconnections.
- Do not place any metal material directly next to the switch sensor on the mirror's surface.
3. Package Contents
Please check the package for the following items:
- 1 x IKSLED Universal Voltage Mirror Touch Switch Module
- 1 x Power Cable with Plug (EU or US type, depending on selection)
- 1 x Output Wire for 12V LED Strip connection
4. Specifications
| Feature | Description |
|---|---|
| Product Name | Mirror Touch Switch |
| Model Number | Universal Voltage Mirror Touch Switch (TSP-001) |
| Brand Name | IKSLED |
| Switch Type | Touch On/Off Switch |
| Input Voltage | AC 100V - 240V (50-60Hz) |
| Output Voltage | DC 12V |
| Max Load | 1A / 3W (Max 12W) |
| Penetration Thickness | ≤5mm (Mirror/transparent glass) |
| Function | Touch on/off, press and hold for stepless brightness adjustment (1% to 100%) |
| Dimmable | Yes |
| Switch Size | 74mm x 46mm x 13mm |
| Mechanical Life | 50,000 hours |
| Certifications | RoHS, LVD, EMC, CE, CCC |
| Application | Bathroom / Vanity / Cabinet Mirrors |


5. Setup & Installation
Follow these steps to install your Mirror Touch Switch:
- Prepare the Mirror: Ensure your mirror has a built-in touch sensor mark. The coating on the back of the mirror where the sensor will be placed should be scraped off if it obstructs the sensor's operation.
- Connect LED Strip: Connect the output wire from the touch switch module to your 12V LED strip. Ensure polarity is correct (red to positive, black to negative).
- Attach Sensor: Peel off the protective film from the double-sided adhesive tape on the back of the touch switch module. Stick the sensor firmly on the back of the mirror, aligning it with the touch sensor mark on the front. Ensure there is no metal material directly next to the switch sensor.
- Connect Power: Plug the power cable into the touch switch module, then plug the power cable into a standard AC 100V-240V wall outlet.
- Test: Once all connections are secure, turn on the power.

6. Operating Instructions
The Mirror Touch Switch offers simple and intuitive control:
- Turn On/Off: Lightly touch the sensor mark on the mirror surface to turn the LED backlighting on or off.
- Adjust Brightness (Dimming): When the light is on, press and hold your finger on the sensor mark. The brightness will smoothly adjust from 1% to 100%. Release your finger when the desired brightness level is reached.


7. Maintenance
- Keep the switch module and connections dry. Avoid splashing water directly onto the switch.
- Clean the mirror surface and the area around the touch sensor mark with a soft, damp cloth. Do not use abrasive cleaners.
- Regularly check all electrical connections for any signs of wear or looseness.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on | No power, loose connections, incompatible mirror, water on switch. | Check if the power outlet is working. Ensure all wires are securely connected. Verify the mirror has a built-in touch sensor mark. Ensure the switch is dry. |
| Dimming function not working | Incorrect operation, faulty switch. | Ensure you are pressing and holding the touch sensor. If the issue persists, contact support. |
| Intermittent operation | Loose sensor attachment, metal obstruction, water on switch. | Re-secure the sensor to the mirror. Ensure no metal is near the sensor. Dry the switch thoroughly. |
9. User Tips
- For optimal performance, ensure the mirror's touch sensor mark is clean and unobstructed.
- Always ensure the back of the mirror is properly prepared (coating scraped off if necessary) for the sensor to function correctly.
- This switch is designed for 12V LED strips. Using it with other voltage LED strips may damage the device or the LEDs.
10. Warranty & Support
This IKSLED Mirror Touch Switch comes with a 1-year warranty from the date of purchase, covering manufacturing defects. Please retain your proof of purchase.
For technical support, warranty claims, or any questions regarding your product, please contact the seller or authorized distributor.