1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your XIMA 7-inch Car Mirror Radio Multimedia Video Player. This device offers a comprehensive in-car entertainment and navigation solution, featuring Wireless CarPlay, Android Auto, Bluetooth connectivity, and various media playback options. Please read this manual thoroughly before use to ensure proper functionality and to prevent damage.
2. Safety Information
- Ensure all wiring is correctly connected to avoid short circuits or damage to the unit and vehicle's electrical system.
- Do not attempt to disassemble or modify the unit, as this may void the warranty and cause electrical hazards.
- Keep the unit away from water and excessive moisture.
- Always ensure the unit is securely mounted to prevent it from becoming a projectile during sudden stops or accidents.
- Do not operate the device in a way that distracts you from driving. Always prioritize road safety.
3. Package Contents
Please check the package for the following items:
Figure 1: Packaging Contents List and Unit Dimensions
- Main Unit (7-inch Car Mirror Radio Multimedia Video Player)
- Suction Cup Bracket
- Power Cable (Car charger type)
- Aux Cable
- Multilingual User Manual (PDF version available at User manual (PDF))
- Backup Camera (Optional, if purchased)
Unit Dimensions: Approximately 9 inches (Length) x 5.5 inches (Height) x 1.4 inches (Width).
Unit Weight: Approximately 0.8 kg.
4. Product Overview
The main unit features a 7-inch IPS touch screen and various ports for connectivity.
Side Ports:
- AUX Port: For audio input from external devices.
- TF Card Slot: For media playback from a TF (Micro SD) card.
- Rear Cam Interface: For connecting the optional reversing camera.
- Type-C Power Port: For power input to the unit.
5. Installation
5.1. Rear Interface Wiring Diagram
Refer to the diagram below for proper wiring connections. Incorrect wiring can cause damage to the unit or vehicle.
Figure 2: Rear Interface Wiring Diagram
- Red (ACC): Connect to ignition switch +12V.
- Yellow (B+): Connect to constant +12V power supply. This maintains power for memory function.
- Black (GND): Connect to ground wire.
- Blue (ANT): Connect to radio antenna.
- Green (ILLUMINATION): Connect to illumination circuit.
- Brown (KEY): Connect to steering wheel control wire.
- Pink (REVERSE): Connect to reversing camera signal.
- Orange (BRAKE): Connect to parking brake cable.
- Speaker Wires: Ensure each of the 8 speaker cables is connected correctly. Do not ground or share speaker cables to avoid sound distortion or unit malfunction.
Important Note:
- The unit turns on normally when both the yellow (B+) and red (ACC) lines receive 12V positive power simultaneously.
- The yellow (B+) line must maintain power for the unit's memory function.
- Each of the 8 speaker cables must not be grounded, shared, or touch other lines to prevent sound output issues, distortion, or overheating.
5.2. Reversing Camera Installation Method
If you have the optional reversing camera, follow these steps for installation:
Figure 3: Reversing Camera Installation Diagram
- Connect the camera's video output to the unit's 'REVERSING VIDEO INPUT' (pink wire).
- Connect the camera's power wire (red) to the vehicle's reverse light power supply.
- Connect the camera's ground wire (black) to a suitable ground point (GND).
Caution:
If the reversing camera is not installed, do NOT connect the REVERSE/BACK cable to any other place. Otherwise, the unit may automatically enter reverse mode, causing malfunction.
6. Operating Instructions
6.1. Phonelink Function (Wireless CarPlay & Android Auto)
This unit supports both wired and wireless connections for Apple CarPlay and Android Auto.
Figure 4: Wireless CarPlay & Android Auto Features
Figure 5: Phonelink User Interface
Apple CarPlay (Wired/Wireless)
- Wired Connection: Connect your iPhone to the unit via a USB data cable. The CarPlay interface will launch automatically.
- Wireless Connection:
- First, enable Bluetooth and Wi-Fi on your iPhone.
- Connect your iPhone to the unit's Bluetooth.
- The CarPlay interface will then launch automatically. (Note: The signal is transmitted via Wi-Fi. CarPlay will function even if Bluetooth is turned off, but will disconnect if Wi-Fi is off.)
Android Auto (Wired/Wireless)
This feature may not be supported in all countries, and Google Play services must be available locally.
- Download and install the "Android Auto" app from Google Play.
- Use an Android phone with Android 6.0 or higher and a valid USB data cable.
- Wired Connection: Connect your Android phone to the unit via a USB data cable. The Android Auto interface will launch automatically.
- Wireless Connection:
- First, enable Bluetooth and Wi-Fi on your Android phone.
- Connect your Android phone to the unit's Bluetooth.
- The Android Auto interface will then launch automatically. (Note: The signal is transmitted via Wi-Fi. Android Auto will function even if Bluetooth is turned off, but will disconnect if Wi-Fi is off.)
6.2. Bluetooth Connection
To connect your phone via Bluetooth:
- Turn on the unit and enable Bluetooth on your mobile phone.
- Search for the unit's Bluetooth name (e.g., "XXXX") on your phone.
- Select the unit and enter the pairing password (e.g., "XXXX") if prompted.
- Once connected, you can make/receive calls and play music through the unit.
6.3. Mirror Link Function
Mirror Link allows you to wirelessly cast your phone's screen to the unit's display.
Figure 6: Mirror Link Functionality
iPhone Mirrorlink (Display Only)
When connected, the iPhone screen content will be projected onto the car screen. Touch input is NOT supported from the car screen for iPhones.
Android Mirrorlink (Full Control)
After connecting an Android device via USB, you will be prompted to install an APP. Reconnect the USB cable after installation to enter screen mirroring mode. You can then operate the phone from both the unit's screen and the phone itself. Image transfer is successful immediately, but audio requires a successful Bluetooth connection.
6.4. Learning Steering Wheel Controls
To configure steering wheel controls:
- Press and hold a button on your original car's steering wheel.
- On the unit's interface, find the corresponding button icon for that function.
- Click the icon to change its color, indicating successful learning.
6.5. Audio Output Modes
The unit offers four ways to output audio to your car's stereo system:
Figure 7: Audio Output Modes
- Built-in Speaker: Audio output directly from the device's internal speaker.
- FM Transmit: Broadcasts a weak FM signal that your car radio can pick up and play.
- AUX Connect: Use the Aux cable to transmit audio to your car's speakers.
- Bluetooth Connect: After pairing with CarPlay, reconnect your phone to the car's Bluetooth for audio playback.
6.6. Remote Control Function
The unit comes with a remote control for convenient operation. The actual remote control style may vary.
Figure 8: Remote Control Layout
Button Functions:
- Volume +
- Previous Track
- Volume -
- Next Track
- SEL / Enter
- Band (FM1-FM2-FM3)
- Menu (Return to the main interface)
- Mode: Switch mode
- Answer Call
- End Call
- Mute On/off
Note:
- Before using the remote control, install two AAA batteries.
- If the remote control does not work, remove the batteries, wipe them, and reinsert them. If it still doesn't work, the battery might be low; replace it.
7. Specifications
| Feature | Specification |
|---|---|
| Brand Name | XIMA |
| Display Size | 7" |
| Resolution | IPS1024*600 |
| Operating System | Linux |
| Processor Type | F133 |
| Chipset | QN8035 |
| RAM | Other |
| Max External Memory | 256G |
| Power Supply Voltage | 12-14.4V DC |
| Max Current Consumption | 15A |
| Out Power | 4*50W |
| Voltage | 12 V |
| Item Weight | 0.8kg |
| Item Size | 178mm*102mm*60mm |
| Is touch screen | Yes |
| TF/Micro SD Slot | 2 |
| Din | Double Din |
| Preset Station | 18 |
| Special Features | Charger, Mobile Phone, MP3 players, Support steering wheel control |
| Digital Media Format | CD, DVD-R/RW, DVD-RAM, VIDEO CD, Mp3, MP4, WMA, JPEG |
| OSD Language | Multiple (Chinese, Polish, German, Russian, French, Korean, Dutch, Czech, Portuguese, Japanese, Turkish, Ukrainian, Hebrew, Spanish, Italian, English) |
| Material | ABS+ |
| Certification | CE |
| System setup password | "113266" |
| Mirror link | iPhone & Android support |
| Microphone | Built-in |
| Input Interface | USB, SD, RCA, Bluetooth |
| Bluetooth phone book | Support |
| Bluetooth music | Support |
| AV-OUT | Support |
8. Troubleshooting
8.1. Cannot Boot Normally
- Ensure the yellow (B+), red (ACC), and black (GND) wires are all connected correctly. Yellow to positive, red to key control, black to negative.
- Verify that the original car wiring colors match the unit's wiring. Mismatched wiring can prevent startup or cause damage.
- Do not force the original car plug into the new unit if it doesn't fit, as this can cause damage.
- Check the fuse on the yellow line. If it's intact, twist the yellow and red wires together, turn the key, and press the unit's power button.
- If the fuse repeatedly blows, it indicates a short circuit. Seek professional repair. To confirm unit fault, connect yellow and red wires to a 12V battery and black to negative; if it still doesn't boot, the unit is faulty.
8.2. Automatic Shut-down
- If the blue (automatic antenna power supply) cable is connected to the unit's power cable, an automatic shutdown will occur. Correct the wiring.
- Unstable voltage: Test the unit with a stable 12V-5A power supply. If it still shuts down, the unit is faulty; otherwise, replace your power supply.
8.3. There is Noise
- If the original speaker power is too low, noise will occur at high volume. Do not set the volume too high.
- If the speaker cable is grounded, connect the iron speaker cable directly to the unit's speaker cable.
8.4. Remote Control Cannot Be Used
- Test by pointing the remote at a mobile phone camera and pressing a button. If the phone screen shows a light, the remote is working; otherwise, replace batteries.
8.5. Settings Cannot Be Saved (No Memory)
- The yellow (B+) and red (ACC) lines are connected together (should be separate).
- The yellow and red wires are reversed; swap their positions.
8.6. Bluetooth Not Working
Turn on the unit, search for its Bluetooth name on your mobile phone, and click Connect. After connecting, you should be able to make calls and play music.
8.7. The Product Emits Smoke
Replace the FUSE. If the problem persists, the internal circuit is burned. Professional service is required.
8.8. The Sound Cannot Be Adjusted
- Reset the unit or unplug and replug the power cord.
- If the volume knob is broken, it needs to be replaced.
8.9. Reversing Camera Does Not Display
- Check for wrong or missing wiring. Refer to Section 5.2 for correct connection.
- If the camera is faulty (e.g., the lamp doesn't light up when properly wired), it needs to be replaced.
8.10. USB Devices Cannot Be Played
Format the USB flash drive to FAT32. Re-download one or two songs and try again. If it still doesn't work, replace the USB flash drive.
8.11. FM Does Not Receive Radio Station
- Ensure the antenna plug is fully inserted. Check if the antenna or line is disconnected.
- Search for stations by pressing 'AS' for automatic search or using the 'before'/'after' buttons.
- If issues persist, unplug the antenna plug and insert a screwdriver or metal strip into the antenna port.
8.12. No Sound Right After Installation
This is usually due to a wiring error or a short-circuited original car speaker wire.
- Check if the speaker cable is short-circuited and connected. Reconnect if any short circuit is found.
- Verify the number of speaker cables. If only 2 speaker cables are present, and the original car line doesn't match the unit, you need to re-route the original car line. One speaker should lead to 2 speaker wires; 2 speakers require 4 speaker cables.
8.13. No Sound After A While
Disconnect all speaker cables from the unit (do not remove them). Find an external speaker and connect it to the gray and purple wires of the unit's tail line. Connect any green wire. If there is sound, the car's speaker line is short-circuited or the speaker is damaged. If there is no sound, the unit is broken.
8.14. Restore to Factory Settings
If CarPlay, Android Auto, or Mirror Link connections are abnormal, you can restore factory settings:
- Go to "Basic Settings" > "Restore Factory" > Select "YES".
- If a reset button is present on the panel, press it to restore factory settings.
9. User Tips
- Always double-check all wiring connections before powering on the unit to prevent damage.
- For optimal performance with wireless CarPlay/Android Auto, ensure your phone's Wi-Fi is enabled, as the connection relies on it.
- If experiencing issues, a factory reset can often resolve software glitches.
- Keep the unit's software updated if new versions become available (check manufacturer's website or support channels).
10. Warranty & Support
10.1. Warranty
This product comes with a 1-year warranty from the date of purchase, covering manufacturing defects. Please retain your proof of purchase for warranty claims.
10.2. Support
For further assistance, please refer to the comprehensive user manual available in PDF format:
You can also contact customer service through the following channels:
Figure 9: Support Contact QR Codes (WhatsApp, TikTok, Instagram)