FREDORCH FR2 Sex Machine User Manual

Introduction

This manual provides essential information for the safe and effective use of your FREDORCH FR2 Sex Machine. Please read it thoroughly before operating the device and retain it for future reference.

This specific FR2 model is equipped with wireless remote control only. If dual control (wired and wireless remote) is desired, please note it may require a separate purchase or a different product variant.

A comprehensive user manual with detailed diagrams is available in PDF format: FREDORCH FR2 User Manual (PDF).

Important Safety Information

Failure to follow these safety guidelines may result in injury or damage to the product.

• DO NOT use this product if you suffer from gynecological diseases, heart problems, or any physical or mental condition that renders you unable to withstand strong stimulation without first consulting with your doctor.
• Stop use if you experience any discomfort.
• For best results, apply a personal lubricant (not included) as needed.
• ONLY use this product with a stable compatible power source.
• ALWAYS use this product on stable, level, and clean surfaces.
• DO NOT use this product if it is damaged or shows signs of malfunction. Repair or replace worn or broken parts before further use.
• DO NOT leave this product unattended during use.
• DO NOT get this product wet or operate it with wet hands.
• ALWAYS disconnect this product from its power source before cleaning, servicing, and storage.

Package Contents

Please check the package to ensure all components are present:

• FREDORCH FR2 Sex Machine main unit
• Power Adapter
• Power Cord (A & B)
• Wireless Remote Control
• Dildo attachment(s)
• Extension Rod (if applicable)
• Mounting Base (if applicable)
• Other accessories as per your specific model/package

Setup Instructions

1. Machine Bracket Assembly

The FR2 machine features two T-shaped brackets for stability. The approximate dimensions of the machine are 45cm (length) x 15cm (width) x 15cm (height).

2. Connecting Power

1. Connect the two halves of the power cord (A and B).
2. Connect one end to a compatible power source and the other to the power inlet on the main body.

Ensure the machine is connected to a grounded outlet. Do not use a 3-to-2 prong adapter or an ungrounded power strip.

3. Angle Adjustment

1. While holding the machine's main body with one hand, loosen the vertical clamps of the joints by pulling their levers open.
2. Raise or lower the main body until your desired height is reached.
3. Lock the main body by pushing the levers closed.

4. Attaching Accessories

The machine features an Anti-Rotation Interface (Decagon Anti-rotation connector) for stable and faster attachment of accessories. Ensure accessories are securely fastened.

Operation

1. Power On and Basic Control

1. Ensure the machine is properly set up and connected to a grounded outlet.
2. Use the wireless remote control to operate the machine.

The remote control features the following keys:

• Speed Key-up: Increases thrusting speed.
• Pause Key: Pauses operation.
• Speed Key-Slow: Decreases thrusting speed.
• Modes Key: Switches between 20 different classic modes.

Press the play button on the remote to start the machine. To change height, angle, or thrusting length, pause the machine first.

2. Adjusting Thrusting Length

1. Loosen the knob in the connecting rod by turning it counterclockwise.
2. Slide the knob and rod forward or backward until you reach your desired thrusting length (adjustable from 3cm to 9cm).
3. Retighten the knob by turning it completely clockwise.

Maintenance

Proper maintenance ensures the longevity and hygiene of your FREDORCH FR2 Sex Machine.

1. Unplug your machine after each use and prior to any cleaning or other maintenance.
2. Clean the exterior of your machine after each use.
3. For the dildos, unscrew them from your machine, rinse them with clean water or mild detergent, and air dry them in a well-ventilated place away from direct sunlight.
4. For other exterior parts, wipe them with a soft, damp cloth. Do not rinse them or use abrasive cleaners or caustic chemicals.
5. Allow all parts to dry completely before further use.

Troubleshooting

If you encounter any issues with your FREDORCH FR2 Sex Machine, please consider the following general advice:

• Machine not powering on: Ensure the power cord is securely connected to both the machine and a grounded power outlet. Check if the outlet is functional.
• Remote control not responding: Check the batteries in the remote control (23A 12V). Ensure there are no obstructions between the remote and the machine.
• Unusual noises or vibrations: Discontinue use immediately and inspect the machine for any loose parts or damage. Ensure all attachments are securely fastened.

If the problem persists, please contact customer support for assistance.

Specifications

User Tips

• Users have noted the good quality and value of the product.
• For enhanced stability, especially when using larger attachments or at higher speeds, ensure the machine is placed on a very firm and level surface.
• If you wish to increase the overall weight or stability for specific setups (e.g., on a bed), consider using additional weights on the base or securing the machine to a stable structure.
• The machine is designed for easy posture changes, allowing for versatile use.

Warranty and Support

For warranty information, technical support, or any inquiries not covered in this manual, please contact the FREDORCH customer service team through your purchase platform. Keep your proof of purchase for warranty claims.