Introduction
The AJAZZ NJ08 is a versatile tri-mode mouse designed for both gaming and office use. It offers flexible connectivity options including wired, 2.4G wireless, and Bluetooth, along with adjustable DPI, customizable buttons, and RGB lighting. This manual provides detailed instructions to help you set up, operate, and maintain your NJ08 mouse for optimal performance.
Safety Information
- Keep the device away from water and other liquids.
- Avoid extreme temperatures and direct sunlight.
- Do not attempt to disassemble or repair the device yourself.
- Dispose of batteries and electronic components responsibly according to local regulations.
Package Contents
- AJAZZ NJ08 Tri-Mode Mouse
- USB Receiver (2.4G)
- Type-C Charging Cable
- User Manual (this document)
Product Overview
Familiarize yourself with the various components and controls of your AJAZZ NJ08 mouse.

- Switch (ON/OFF): Powers the mouse on or off.
- Current Mode Indicator Light: Displays the active connection mode.
- Mode Switch Key: Cycles between 2.4G, Bluetooth, and Wired modes.
- DPI Switch Key: Adjusts the mouse sensitivity (DPI).
- Receiver Storage Compartment: Securely stores the 2.4G USB receiver when not in use.
- Receiver: USB dongle for 2.4G wireless connection.
Setup
The AJAZZ NJ08 mouse supports three connection modes: Wired, 2.4G Wireless, and Bluetooth.
1. Wired Mode
- Connect the provided Type-C charging cable to the mouse and your computer's USB port.
- The mouse will automatically switch to wired mode and begin charging.
2. 2.4G Wireless Mode
- Locate the USB receiver in the storage compartment on the bottom of the mouse.
- Plug the USB receiver into an available USB port on your computer.
- Slide the mode switch on the bottom of the mouse to the '2.4G' position.
- The mouse should connect automatically.
3. Bluetooth Mode
- Slide the mode switch on the bottom of the mouse to the 'BT' position.
- On your computer or device, open Bluetooth settings and search for new devices.
- Select 'AJAZZ NJ08' from the list of available devices to pair.
Operating Instructions
DPI Adjustment
The mouse features 6 adjustable DPI levels for varying sensitivity, suitable for different scenarios like office work or gaming. You can cycle through these levels using the DPI switch key on the bottom of the mouse.

The default DPI levels are 400, 800, 1200, 1600, 2400, and 3200. For higher precision, up to 12,800 DPI can be achieved using the dedicated driver software (not included, typically available for download from the manufacturer's website).
Polling Rate Settings
The polling rate can be adjusted to 125Hz, 250Hz, 500Hz, or 1000Hz. A higher polling rate reduces input lag, which is beneficial for gaming. Note that polling rate adjustment is only supported in 2.4G wireless mode, not in Wired or Bluetooth modes.
RGB Lighting
The mouse is equipped with a colorful RGB light strip at the bottom, creating an immersive atmosphere. Specific modes and customization options may be available through the driver software.

Charging
The AJAZZ NJ08 mouse is equipped with a 300mAh battery and a Type-C charging port. A full charge typically takes 2-3 hours.

To charge the mouse, connect the provided Type-C cable to the mouse's charging port and a USB power source. The indicator light may show charging status.
Maintenance
- Cleaning: Use a soft, dry cloth to clean the mouse. For stubborn dirt, a slightly damp cloth can be used, but ensure no moisture enters the device.
- Storage: Store the mouse in a cool, dry place when not in use. If storing for an extended period, ensure the battery is partially charged (around 50%) to prolong its lifespan.
- Battery Care: Avoid fully discharging the battery frequently. Charge the mouse when the battery indicator suggests low power.
Troubleshooting
- Mouse not responding: Ensure the mouse is powered on and correctly connected in the desired mode (wired, 2.4G, or Bluetooth). Check battery level and charge if necessary.
- 2.4G connection issues: Ensure the USB receiver is securely plugged in and the mouse is set to 2.4G mode. Try plugging the receiver into a different USB port.
- Bluetooth pairing issues: Ensure the mouse is in Bluetooth pairing mode and your device's Bluetooth is enabled and searching. Remove previous pairings and try again.
- DPI not changing: Press the DPI switch key firmly. If using driver software, ensure it is installed correctly and the settings are applied.
- RGB lights not working: Check if the mouse is powered on. Some RGB modes might turn off during movement to conserve battery.
Specifications

| Feature | Description |
|---|---|
| Product Brand | NACODEX / Ajazz |
| Product Model | NJ08 |
| Transmission Method | USB Wired + 2.4G Wireless + Bluetooth |
| DPI Levels | 400 / 800 / 1200 / 1600 / 2400 / 3200 (Up to 12,800 via driver software) |
| Adjustable Report Rate | 125Hz / 250Hz / 500Hz / 1000Hz (2.4G mode only) |
| Battery Capacity | 300mAh |
| Charging Port | Type-C |
| Product Weight | ≈70g |
| Product Dimensions | 122.5mm x 65mm x 40.9mm |
| Number of Keys | 5 Keys + 1 Switch + 1 DPI Key + 1 Mode Switch Key |
| Key Lifespan | 3,000,000 Times |
| Shell Material | ABS |
| Supported Systems | Windows Vista/XP/7/8/10/11, Mac |
User Tips
- The lightweight design (~70g) contributes to comfortable use and reduced wrist strain during long sessions.
- RGB lights may automatically turn off when the mouse is in motion to conserve battery life.
- The mouse does not display the exact battery percentage, so monitor its performance for signs of low power.
- While RGB lighting offers various modes, it may not be 100% customizable without specific software.
- The mouse's ergonomic, asymmetric right-handed design is suitable for extended use in both gaming and office environments.
- Users with smaller hands might find the back height of the mouse slightly high, which could affect comfort.
Warranty and Support
For detailed information regarding warranty, technical support, and additional guides, please refer to the official user manual PDF:
You may also visit the Ajazz Official Store for further assistance.