Introduction
The Janmifly Q2 Ultra Android TV Stick transforms your television into a smart entertainment hub. Running on Android 14, it offers 4K Ultra HD streaming, Wi-Fi 6 connectivity, and smart voice control for an enhanced viewing experience. This manual provides essential information for setting up, operating, and maintaining your device.

Figure 1: The Janmifly Q2 Ultra Android TV Stick, featuring Android 14, Wi-Fi 6, Rockchip 3518, 4K HDR, and Bluetooth 5.0, shown with its remote and a typical smart TV interface.
Setup
Package Contents
Please check the box for the following items:
- Janmifly Q2 Ultra Android TV Stick
- Remote Control
- USB Power Cable
- User Manual (this document or a printed version)
Physical Connection
Follow these steps to connect your TV Stick to your television:
- Plug the HDMI cable of the TV Stick into an available HDMI port on your TV.
- Connect the USB power cable to the TV Stick and then plug the other end into a power adapter (not always included, can be a TV USB port) or a wall outlet.
- Ensure the infrared receiver (if separate) is positioned to receive signals from the remote.

Figure 2: An overview of the Q2 Ultra User Manual, detailing setup procedures including physical connections, remote control functions, Bluetooth pairing, multi-screen setup, and how to navigate applications. Refer to the 'Installation' section in the diagram for visual guidance.
Remote Control Battery Installation
Open the battery compartment on the back of the remote control and insert two AAA batteries (not included), ensuring correct polarity (+/-).
Bluetooth Pairing (Remote Control)
To pair your remote control with the TV Stick:
- Place the remote control within 1 meter of the TV Stick.
- Install batteries into the remote control.
- Press the "voice key" (microphone icon) on the remote control. The remote control's red light will enter a high-frequency flickering state.
- Wait a few seconds for the pairing to complete.
- For subsequent reconnections via Bluetooth, simply press any button on the remote control.
Wi-Fi Connection
To connect your TV Stick to your home Wi-Fi network:
- From the main screen, navigate to Settings.
- Select Network.
- Choose Wi-Fi and turn on the Wi-Fi function.
- Select your desired Wi-Fi network from the list.
- Enter the password for your Wi-Fi network and select Connect.
- Once connected, you can begin using your TV Stick normally.

Figure 3: The Q2 Ultra supports Dual WiFi (2.4GHz and 5.8GHz) with WiFi 6 technology for faster speeds, greater capacity, and reduced network congestion compared to standard 2.4GHz WiFi.
Operating Instructions
Basic Remote Control Functions
Familiarize yourself with the remote control buttons:
- Navigation (Up/Down/Left/Right): To move through menus.
- Select (OK): To confirm selections.
- Back: To return to the previous screen.
- Home: To go to the main home screen.
- Google Assistant (Voice Key): To activate voice commands.
- Mouse: (If applicable) To activate mouse pointer mode.
- YouTube / Netflix: Dedicated buttons for quick access.
- Vol Up / Vol Down: To adjust volume.
- Power On/Off: To turn the device on or off.
- Settings: To access system settings.

Figure 4: A detailed view of the Q2 Ultra remote control, showing navigation buttons, voice assistant button, YouTube, Netflix, power, and settings buttons.
Smart Voice Control
Utilize the Google Assistant button on your remote to issue voice commands. Simply press the button and speak your request to search for content, open apps, or control playback.

Figure 5: The included remote control features smart voice control, allowing one-click voice operation to search for apps, content, and control your TV stick.
Application Installation
You can install applications from the Google Play Store or by sideloading APK files:
From Google Play Store:
- Navigate to the Google Play Store app on your home screen.
- Search for the desired application.
- Select the app and click Install.
Sideloading via USB:
- Download the desired application's APK file to a USB flash drive using a computer.
- Connect the USB flash drive to the USB port on the TV Stick (if available, or via a USB hub).
- Open the File Browser application on your TV Stick.
- Navigate to your USB device, locate the APK file, and select it to install.
- Follow the on-screen prompts to complete the installation. The app icon will appear in your application menu.
Multi-screen Interconnection (Casting)
The Q2 Ultra features Chromecast built-in, allowing you to cast content from other devices:
- Ensure your TV Stick and the device you want to cast from (smartphone, tablet, laptop) are connected to the same Wi-Fi network.
- From a compatible app on your device (e.g., YouTube, Netflix), tap the Cast icon (🖥).
- Select your Q2 Ultra TV Stick from the list of available devices.
- Content from your device will now be displayed on your TV.
- The device also supports Airplay, DLNA, and Bluetooth 5.X for various casting and connectivity options.

Figure 6: With Chromecast built-in, you can easily stream your favorite entertainment and apps from your phone, tablet, or laptop directly to your TV screen using Airplay, DLNA, or Bluetooth 5.X.
Switching Between Applications
To view and switch between recently used programs or all installed applications:
- Navigate to "My Apps" or the "Apps" section on your home screen.
- Click on the program icon of the application you wish to open.
Maintenance
- Cleaning: Use a soft, dry cloth to clean the device. Do not use liquid cleaners or abrasive materials.
- Environment: Protect the device from high temperatures, humidity, water, and dust. Place it in a well-ventilated location to prevent internal heat accumulation.
- Handling: Do not place any objects near your device that may damage it (e.g., liquid-filled objects or candles).
- Batteries: When replacing remote control batteries, do not mix old and new batteries, or different types of batteries (alkaline, standard carbon-zinc, rechargeable).
Troubleshooting
If you encounter issues with your Janmifly Q2 Ultra, refer to the following common problems and solutions:
- No display after power on?
- Confirm that your device is properly connected to the TV.
- Ensure your TV's input source is set to the correct HDMI port.
- TV has images but no sound?
- Check if your TV is muted or if the volume is set too low.
- Verify audio settings on the TV Stick (Settings > Display & Sound > Audio).
- Fail to connect to the network?
- If using Ethernet, ensure the cable is properly connected.
- If using Wi-Fi, ensure Wi-Fi is enabled and your TV Stick has a strong enough signal from your router.
- Restart your router and the TV Stick.
- Remote control failure?
- Replace the batteries in the remote control with new ones, ensuring correct polarity.
- Ensure the remote control is within the operating range of the TV Stick.
- Go to Settings > Connected Devices > Remote & Accessories to unpair and re-pair the remote control.
Important: Please use only the accessories provided or recommended by the manufacturer to avoid any risks. Do not attempt to repair the TV Stick yourself, as this will invalidate the warranty.
Specifications

Figure 7: Powered by the Rockchip 3518 processor, featuring a Quad Core A53 CPU and Mali-450 GPU, providing strong performance with options for 2GB RAM + 8GB ROM or 2GB RAM + 16GB ROM.
| Feature | Specification |
|---|---|
| Model | Q2 ULTRA |
| Brand | Janmifly |
| Operation System | Android 14 |
| CPU | Rockchip 3518 Quad Core Cores-A53 |
| GPU | Mali-450 |
| RAM | 2GB |
| ROM | 8GB / 16GB (depending on model) |
| Resolution | 4K (Ultra-HD) |
| Wi-Fi | Wi-Fi 6 (Dual Band 2.4G/5.8G) |
| Bluetooth | BT5.0 |
| Decode Ability | 1080P (Full-HD) |
| Connectors | HDMI-Compatible |
| Video Format | AVI, DivX, MKV, DAT, VOB, MPG, MPEG, MOV, MP4, RM, RMVB, WMV |
| Picture Format | JPEG |
| Wi-Fi Range | 50m |
| Transmission Distance | <50m |
| Antenna Type | Internal |
| Recording | No |
| Hard Disk Capacity | < 100GB |
| Remote Control | Included |
| Certification | CE, FCC, RoHS |
| Origin | Mainland China |
| Item Type | TV stick |
| Function | Multiple-Input Single-Output |
Warranty and Support
For warranty information, please refer to the terms and conditions provided at the time of purchase or contact your retailer. Keep your proof of purchase for any warranty claims.
Contact Information:
- Manufacturer Email: xianya-innovation@outlook.com
- EU Authorized Representative Email: successservice2@hotmail.com
A detailed user manual in PDF format may be available for download from the seller's product page or by contacting support.
User Tips
- Sideloading Apps: The Q2 Ultra often includes a USB port and a pre-installed file browser, making it convenient to sideload applications from a USB stick without needing an email account during initial setup.
- Ease of Setup: Users generally find the device easy to set up and stable in operation, providing a smooth experience right out of the box.
- Ideal for Non-Smart TVs: This device is an excellent solution for upgrading older, non-smart televisions, giving them access to modern streaming services and apps.