MDQ01 MDQ01

Contents

Instruction Manual for Dia 20cm Iron Art Ceiling/Pendant Lamp

Model: MDQ01

Introduction

This manual provides detailed instructions for the safe installation, operation, and maintenance of your new Dia 20cm Iron Art Ceiling/Pendant Lamp, Model MDQ01. Please read this manual thoroughly before installation and keep it for future reference.

Important Safety Instructions

DANGER: Risk of Electric Shock. Always disconnect power at the main fuse or circuit breaker before installation or servicing.

  • Ensure the power supply is turned off before handling the lamp.
  • The edges of the product may be sharp; handle with care to prevent cuts or scratches.
  • Ensure all components are securely fastened to prevent slipping or falling.
  • Verify that all screws and accessories are tightened before use.
  • This product is designed for indoor use only.
  • Do not scratch the surface of the product during installation or cleaning.

This product complies with CE and RoHS directives.

Package Contents

Please check that all parts are present and undamaged before beginning installation.

  • Lamp Shade (Iron Art with Crystal Accents)
  • Mounting Base (for Ceiling Mount) or Pendant Cord with Canopy (for Pendant Mount)
  • E27 Lamp Holder
  • Mounting Hardware (screws, anchors, wire connectors)
  • Instruction Manual (this document)

Specifications

FeatureDetail
ModelMDQ01
Item TypePendant Lights / Ceiling Lamps
Installation TypeCord Pendant (for pendant style), Self-contained (for ceiling style)
MaterialMetal
Voltage90 - 260 V AC
Power SourceAC
Base TypeE27
Light SourceLED bulbs (not included)
Is Bulbs IncludedNo
Is DimmableNo
Number of Light Sources1
Lighting Area5-10 square meters
Luminous Flux249-2000 Lumens
CertificationCCC, CE, CQC, EMC, FCC, GS, LVD, PSE, ROHS, SAA, UL, VDE, EAC
Package Dimensions (L x W x H)26 cm x 25 cm x 22 cm
Package Weight0.777 kg

Approximate dimensions for the ceiling mount variant (Black): Diameter 19cm, Height 20cm, Base Diameter 10cm.

Dimensions of the ceiling lamp variant

Figure 1: Approximate dimensions of the ceiling lamp (Black variant).

Installation Instructions

General Safety Precautions:

  • Always ensure the power is disconnected at the circuit breaker before installation.
  • If you are unsure about electrical wiring, consult a qualified electrician.
  • Wear appropriate safety gear, including gloves and eye protection.

Ceiling Mount Installation:

  1. Turn off the main power supply to the installation area.
  2. Mark the drilling points on the ceiling using the lamp's mounting base as a template.
  3. Drill holes and insert appropriate wall anchors (if necessary).
  4. Connect the lamp's wires to the household electrical wires (Live, Neutral, Ground) according to local electrical codes. Use wire connectors to secure connections.
  5. Attach the mounting base to the ceiling using screws.
  6. Secure the lamp shade assembly to the mounting base.
  7. Install an E27 bulb (not included) into the lamp holder.
  8. Restore power and test the lamp.
Ceiling lamp installed in a hallway

Figure 2: Example of ceiling lamp installation in a hallway.

Pendant Mount Installation:

  1. Turn off the main power supply to the installation area.
  2. Install the ceiling canopy and mounting bracket to the junction box on the ceiling.
  3. Adjust the pendant cord length as desired.
  4. Connect the pendant lamp's wires to the household electrical wires (Live, Neutral, Ground) according to local electrical codes. Use wire connectors to secure connections.
  5. Secure the canopy to the mounting bracket.
  6. Attach the lamp shade assembly to the pendant lamp holder.
  7. Install an E27 bulb (not included) into the lamp holder.
  8. Restore power and test the lamp.
Pendant lamp installed in a hallway

Figure 3: Example of pendant lamp installation in a hallway.

Operation

Once properly installed and wired, the lamp operates via a standard wall switch connected to the circuit. Ensure an E27 LED bulb is correctly installed before turning on the power.

  • Power On/Off: Use the wall switch to turn the lamp on or off.
  • Bulb Type: This fixture requires one E27 base LED bulb. Do not exceed the maximum wattage specified for E27 bulbs (typically 60W incandescent equivalent for LED).

Maintenance

Cleaning:

  • Always disconnect power before cleaning.
  • Wipe the metal and crystal parts with a soft, dry, or slightly damp cloth.
  • Do not use abrasive cleaners, solvents, or polishes as they may damage the finish.

Bulb Replacement:

  1. Turn off the power supply to the lamp at the circuit breaker.
  2. Allow the bulb to cool completely if it was recently in use.
  3. Carefully unscrew the old E27 bulb.
  4. Screw in a new E27 LED bulb.
  5. Restore power and test the lamp.

Troubleshooting

ProblemPossible CauseSolution
Lamp does not light upNo power supplyCheck circuit breaker and wall switch.
Loose wiring connectionEnsure all wire connections are secure (with power off).
Faulty bulbReplace the E27 bulb.
Light flickersLoose bulb or wiringTighten the bulb or check wiring connections (with power off).
Incompatible dimmer switchThis lamp is not dimmable. Ensure it is connected to a standard ON/OFF switch.

User Tips

  • Take your time during assembly to ensure all parts are correctly fitted and securely tightened.
  • The lamp's design creates a beautiful scattered light effect, enhancing the romantic atmosphere of any room.
  • Consider the lamp's dimensions (approx. 19cm diameter) when planning its placement to ensure it fits your space aesthetically and functionally.

Warranty and Support

For any questions, technical support, or warranty claims, please contact the manufacturer directly:

  • Manufacturer: Zhongshan Chuangyi Plastic Processing Factory
  • Address: CN-2nd Floor, No.1 Quanlin Street, Nanlong Village, Sanxiang Town, Zhongshan City
  • Phone: 86-15521769265
  • Email: 790054892@qq.com

A detailed user manual in PDF format is also available for download. Please refer to the product page for the link to "Item guides & documents".

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.