1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Tuya WiFi Temperature and Humidity Sensor. This smart device allows you to monitor environmental conditions in real-time and integrate with smart home systems for enhanced comfort and safety. Please read this manual carefully before use and keep it for future reference.

2. Product Overview
2.1 Package Contents
- Temperature & Humidity Sensor x 1
- Magnetic Plate x 1
- Reset Pin (installation tool) x 1
- User's Manual x 1 (this document)
2.2 Device Appearance

The sensor features an indicator light and a reset button. The indicator light provides status feedback during setup and operation. The reset button is used for pairing and resetting the device.
3. Specifications
| Parameter | Value |
|---|---|
| Size | 70 x 24 x 19 mm |
| Power Input | 2 x AAA Alkaline battery |
| Wireless Type | WiFi (2.4GHz) |
| Measure Range | -20°C to 60°C / 0%RH to 100%RH |
| Measure Accuracy | ±1°C / ±5%RH |
| Alarm Mode | APP notification push |

4. Setup Guide
Follow these steps to set up your WiFi Temperature and Humidity Sensor:
4.1 Installing the Battery
- Push the mounting bracket upward and carefully remove it from the sensor.
- Insert two AAA alkaline batteries into the battery compartment, ensuring correct polarity.
- Replace the mounting bracket. The indicator lights will turn on briefly and then off, indicating successful battery installation.
Recommended: Use high-quality alkaline or lithium batteries for optimal product performance. Heavy-duty or rechargeable batteries are not recommended.
4.2 App Installation and Registration
- Scan the QR code provided in the original manual or search for "Smart Life" or "Tuya Smart" app in the Google Play Store or Apple App Store.
- Download and install the app.
- Open the app and register an account using your email address.
4.3 Connecting to 2.4GHz Wi-Fi
Ensure your mobile device is connected to a 2.4GHz Wi-Fi network. The sensor only supports 2.4GHz Wi-Fi.
- Open the Smart Life or Tuya Smart app.
- On the app's home interface, tap the "+" icon (or "Add Device").
- To enter distribution mode, use the provided reset pin to long-press the reset button on the sensor for 3-5 seconds until the indicator light flashes rapidly.
- In the app, select "Add Device" and allow it to search for nearby devices. The app should automatically detect the sensor.
- Confirm the detected device and enter your 2.4GHz Wi-Fi network password when prompted.
- Follow the on-screen instructions to complete the pairing process. Once successfully added, the device will appear in your app.
Note: If you are using a Zigbee gateway, ensure it is already connected to your Wi-Fi network. Then, within the gateway settings in the app, select "Add subdevice" and long-press the sensor's reset button until the LED indicator flashes rapidly. The gateway will then search for and add the sensor.
5. Operating Instructions
5.1 Remote Viewing of Temperature and Humidity
Once connected, you can view real-time temperature and humidity data from your sensor anywhere, anytime, using the Smart Life or Tuya Smart app on your smartphone. The app provides a 24-hour real-time view of environmental changes.

5.2 Remote Alarm Functions
Set custom temperature and humidity thresholds within the app. If the environment exceeds or falls below these limits, you will receive instant notifications on your smartphone, allowing you to take timely action. This is particularly useful for monitoring conditions in sensitive areas like pet enclosures or storage rooms.

5.3 Smart Home Linkage
Integrate your sensor with other Tuya-compatible smart devices to create automated scenarios. For example, you can set up a rule to automatically turn on an air conditioner if the room temperature exceeds a certain level, or activate a humidifier if humidity drops too low.

5.4 Temperature Unit Selection
You can select your preferred temperature unit (Celsius or Fahrenheit) within the Smart Life or Tuya Smart app settings.
5.5 Third-party Voice Control
The sensor is compatible with popular voice assistants such as Amazon Alexa and Google Assistant, allowing for convenient voice-activated monitoring.
6. Maintenance
6.1 Battery Replacement
When the battery level is low, the app will send a low power alert. Replace the two AAA batteries as described in Section 4.1. Ensure to use high-quality alkaline or lithium batteries for optimal performance.
6.2 Cleaning
Wipe the sensor with a soft, dry cloth. Do not use liquid cleaners or abrasive materials, as this may damage the device.
7. Troubleshooting
- Device not connecting to Wi-Fi: Ensure your Wi-Fi network is 2.4GHz. The sensor does not support 5GHz networks. Check that your phone is also connected to the 2.4GHz network during setup. Make sure the sensor is in pairing mode (indicator light flashing rapidly) by long-pressing the reset button.
- Inaccurate readings: While the sensor is generally accurate (±1°C / ±5%RH), environmental factors can influence readings. Ensure the sensor is not placed in direct sunlight, near heat sources, or in areas with extreme drafts.
- No notifications: Check your app settings to ensure notifications are enabled for the device. Also, verify your phone's notification settings for the Smart Life/Tuya Smart app.
- Battery life: Battery life can vary based on usage and environmental conditions. If battery drains quickly, consider replacing with new, high-quality alkaline batteries.
8. User Tips
- Setup Tip: When pairing, remember to hold down the hidden reset button with the supplied pin for about 5 seconds until the indicator light starts blinking rapidly. This puts the device into pairing mode.
- Accuracy: Users report good accuracy, often within 0.3 degrees Celsius of other thermostats.
- Battery Display: The app displays the battery percentage, which is a useful feature for monitoring power levels.
- Refrigerator Use: While it can measure refrigerator temperature, be aware that the Wi-Fi signal may not penetrate the refrigerator walls effectively.
9. Frequently Asked Questions (FAQ)
- Q: Can this sensor measure refrigerator temperature?
- A: Yes, it can measure refrigerator temperature. However, the Wi-Fi signal might not be able to transmit effectively from inside a refrigerator. You may need to consider placement carefully or explore options for extending Wi-Fi range if this is your primary use case.
- Q: Does this device require an additional hub?
- A: The primary function of this product is as a WiFi Temperature and Humidity Sensor, which connects directly to your 2.4GHz Wi-Fi network via the Smart Life or Tuya Smart app without needing a separate hub. However, if you intend to use it in a Zigbee network, a compatible Zigbee gateway would be required.
10. Warranty and Support
For warranty information and technical support, please refer to the official product page or contact the seller directly. You can also find additional resources and a downloadable user manual (PDF) at: User Manual (PDF).