paweinuo Bicycle Light

Contents

Paweinuo Bicycle Light User Manual

Ultra Bright USB Rechargeable Bicycle Front Headlight

1. Introduction

Thank you for choosing the Paweinuo Bicycle Light. This ultra-bright, USB rechargeable front headlight is designed to enhance your visibility and safety during night riding, daily commuting, outdoor cycling, and other activities. Please read this manual thoroughly before use to ensure proper operation and maintenance.

Paweinuo Bicycle Light mounted on a bike with a rider at night

Figure 1: Paweinuo Bicycle Light in use.

Product Overview Video

Video 1: A comprehensive demonstration of the bicycle light, including its features, installation, and charging capabilities.

2. Important Safety Information

▲ WARNING: Please be aware of potential fire risks and strictly adhere to the instructions provided in this manual for charging and storage. For proper disposal of the lithium-ion battery, consult your local authority's website for guidelines and ensure safe disposal in accordance with all applicable legal requirements.

Always ensure the light is securely mounted before riding. Do not look directly into the light beam to avoid eye injury. Keep out of reach of children.

3. Package Contents

Please check the package for the following items:

  • 1 x Paweinuo Bicycle Light
  • 1 x Handlebar Mount
  • 1 x USB Type-C Charging Cable
  • 1 x Hex Wrench
  • 1 x User Manual (this document)
Contents of the Paweinuo Bicycle Light package, including the light, mount, cable, and wrench.

Figure 2: Package contents.

4. Setup and Installation

  1. **Initial Charge:** Fully charge the bicycle light before its first use. Refer to the 'Charging the Battery' section for details.
  2. **Mounting:** Fix the bicycle light securely onto your bike's handlebar or another appropriate position using the provided mount.
  3. **Adjust Angle:** Adjust the angle of the light to achieve the best illumination range for your riding conditions. Ensure the beam is directed forward and slightly downward to illuminate the path without blinding oncoming traffic.

Installation Demonstration

Video 2: Demonstration of attaching the bicycle light to the handlebar mount.

5. Operating Instructions

  1. **Power On/Off:** Press the power switch located on the top of the light to turn it on. Press again to cycle through modes or hold to turn off.
  2. **Changing Modes:** The light features 4 adjustable lighting modes. Briefly press the power switch to cycle between:
    • Strong white light
    • Weak white light
    • Red and orange light
    • All lights flash
Diagram showing the 4 lighting modes: Strong white light, Weak white light, Red and orange light, and All lights flash, with a control button.

Figure 3: One-click control for 4 lighting modes.

Night Riding Illumination

Comparison of night riding with and without the bicycle light, showing enhanced visibility.

Figure 4: Enhanced visibility during night riding.

Light Modes Demonstration

Video 3: Cycling through the various light modes of the bicycle headlight.

Night Use Demonstration

Video 4: Real-world demonstration of the bicycle light's illumination during night riding.

6. Charging and Battery

Charging the Battery

  1. Locate the Type-C charging port on the device.
  2. Connect the provided USB Type-C cable to the light and to a suitable USB power source (e.g., computer, wall adapter, power bank).
  3. The power indicator lights will show the charging status.
  4. Charging time is approximately 3-6 hours.
Close-up of the bicycle light showing the Type-C charging port connected to a cable.

Figure 5: Type-C charging for faster and more stable charging.

Power Display

The power of the 3 LED lights clearly indicates the remaining battery power:

  • **0-34%:** One LED lit
  • **35-69%:** Two LEDs lit
  • **70-100%:** Three LEDs lit
Diagram showing the power display with 3 LED lights indicating remaining battery power (0-34%, 35-69%, 70-100%).

Figure 6: Power display indicators.

Battery Information

The bicycle light is equipped with a built-in large-capacity polymer 18650 battery, offering approximately 10 hours of battery life depending on the mode used.

Internal view of the bicycle light showing the large-capacity polymer battery.

Figure 7: Built-in large-capacity polymer battery.

Charging Demonstration

Video 5: Demonstration of charging the bicycle light using a power bank and its ability to charge a phone.

7. Maintenance

  • **Cool Down:** If the product becomes hot after being used for a long time, please allow it to cool down before further use or storage.
  • **Cleaning:** Wipe the light with a soft, damp cloth to remove dirt and debris. Do not use abrasive cleaners or solvents.
  • **Storage:** Store the light in a cool, dry place when not in use. Avoid extreme temperatures.
  • **Waterproof:** The light has an IPX6 waterproof rating, meaning it is protected against high-pressure water jets. However, it is not designed for submersion.

8. Troubleshooting

Problem Possible Cause Solution
Light does not turn on Low battery; Faulty switch Charge the battery; Contact support if issue persists
Light is dim Low battery; Lens is dirty Charge the battery; Clean the lens
Light gets hot Normal operation for high brightness; Prolonged use Allow to cool down; Use lower brightness mode if needed

9. Specifications

Feature Detail
Brand Name paweinuo
Type HEADLIGHTS
Light Source Type LED
Brightness Levels 4 adjustable levels (Strong White, Weak White, Red/Orange, All Flash)
Power Supply Battery (18650 type)
Power Supply Method USB Type-C charging
Battery Capacity 18650 battery (built-in large-capacity polymer battery)
Battery Life Approx. 10 hours
Charging Time 3-6 hours
Body Material ABS
Waterproof Level IPX6
Mounting Placement Handlebar
Intelligent Sensing No
Certifications CE, FCC, RoHS, pse
Applicable Vehicle Models Mountain bikes, road bikes, folding bikes, electric bikes
Applicable Scenarios Daily commuting, night riding, outdoor cycling, camping, emergency lighting
Target Audience Cycling enthusiasts, food delivery riders, students, office workers

Package Dimensions

  • Length: 16 cm
  • Width: 15 cm
  • Height: 7 cm
  • Weight: 0.314 kg

10. User Tips

  • Users appreciate the bright illumination provided by this light, making it effective for night riding.
  • Ensure the light is angled correctly to maximize visibility for yourself and minimize glare for others.
  • Regularly check the battery indicator to avoid running out of power unexpectedly during rides.

11. Warranty and Support

For detailed warranty information and support, please refer to the official product documentation or contact the manufacturer directly.

Manufacturer Information:

  • **Manufacturer:** Shenzhen Paweinuo Technology Co.,LTD
  • **Address:** Henggang Street, Longgang District, Shenzhen City, Guangdong Province
  • **Email:** 712714095@qq.com

EU Authorized Representative:

  • **Representative:** WeTapeV Euro s.r.o.
  • **Address:** Na Provaznici 2063/3, Smichov, 150 00 Praha, Czech Republic
  • **Email:** info@wetapeveuro.com

A comprehensive user manual in PDF format is available for download. You can find it by searching for the product on the seller's website or by contacting support. The PDF contains additional details and diagrams for your reference.

© 2026 Paweinuo. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.