1. Introduction
This manual provides essential instructions for the safe and effective use of your Jumunion Portable Digital Alcohol Detector. Please read this manual thoroughly before operating the device and keep it for future reference.
2. Safety Warnings
⚠ Warning:
- Please mind potential fire risk and strictly follow the instruction manual for charging and storage.
- For disposal, please check your local authority's website for more information and dispose of the lithium-ion battery safely in accordance with the applicable legal requirements.
- Keep away from ignition sources and ensure adequate ventilation.
3. Product Overview
The Jumunion Portable Digital Alcohol Detector is a compact and sensitive device designed for breath alcohol testing. It features a clear digital display and a Type-C charging port.
4. Specifications
| Feature | Detail |
|---|---|
| Product Name | Alcohol Tester |
| Brand | Jumunion |
| Detection Range | 0.00~200mg/100mL |
| Reset Time | 15 seconds |
| Warm-up Time | 15 seconds |
| Induction Time | 5 seconds |
| Power Supply | 3.7V/200mAh rechargeable lithium battery |
| Charging Interface | Micro-USB (5V/1A charging) |
| Dimensions | 103*30*19mm |
| Batteries Included | Yes |
5. Setup
5.1 Charging the Device
The device is powered by a rechargeable lithium battery. Before first use, or when the battery indicator is low, charge the device using a Type-C charging cable.
- Locate the Type-C charging port on the side of the device.
- Insert the Type-C charging cable into the port.
- Connect the other end of the cable to a 5V/1A power source (e.g., USB wall adapter, computer USB port).
- The device will indicate charging status on its display. A full charge provides standby power for more than a week.
6. Operating Instructions
Follow these steps to perform an alcohol test:
- **Power On**: Long press the power button to turn on the device. The display will light up.
- **Warm-up**: Wait for 15 seconds during the warm-up period. The display will show a countdown. Ensure the warm-up value reaches 0 before proceeding.
- **Blow into the Instrument**: Once the second icon indicator appears, begin to blow steadily into the instrument's air inlet for approximately 5 seconds.
- **View Results**: After blowing, the device will process the sample. The third icon indicator will appear, and the test results will be displayed on the screen. The device will also emit a "drip drip drip" sound and a corresponding light prompt based on the alcohol level.
The device supports continuous detection, allowing for multiple tests in succession after the reset time.
7. Understanding Test Results
The device provides clear visual and auditory indications of alcohol levels:
- **Green Light / "Normalcy"**: Indicates a low or zero alcohol level (e.g., 0.00).
- **Orange Light / "Drinking"**: Indicates a moderate alcohol level (e.g., 0.15).
- **Red Light / "Drunk"**: Indicates a high alcohol level (e.g., 0.25).
Note: This device is intended for personal use and should not be used as a definitive measure for legal or medical purposes. Always adhere to local laws and regulations regarding alcohol consumption and driving.
8. Maintenance
- **Cleaning**: Wipe the device with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
- **Storage**: Store the device in a cool, dry place, away from direct sunlight and extreme temperatures.
- **Battery Care**: To prolong battery life, avoid fully discharging the battery frequently. Charge regularly.
9. Troubleshooting
- Device does not power on:
- Ensure the device is fully charged. Connect it to a power source and try again.
- Inaccurate or inconsistent readings:
-
- Ensure the warm-up period is completed (countdown to 0).
- Blow steadily and continuously for the full 5 seconds.
- Avoid testing immediately after consuming alcohol or smoking; wait at least 20 minutes.
- Ensure the device is clean and free from obstructions in the air inlet.
- Device not charging:
-
- Check the Type-C cable for damage and ensure it's securely connected.
- Try a different charging cable or power adapter.
10. User Tips
- For most accurate results, wait at least 20 minutes after eating, drinking, or smoking before performing a test.
- Perform tests in a well-ventilated area.
- Keep the device clean and free from dust or debris, especially the air inlet.
- Regularly charge the device to ensure it's ready for use when needed.
11. Warranty and Support
For detailed warranty information and customer support, please refer to the official user manual PDF provided by the manufacturer. This document contains comprehensive details regarding product guarantees and how to obtain assistance.
A user manual (PDF) is available for download. Please refer to the seller's product page or contact customer support for the link: User Manual (PDF)
12. Compliance Information
This device complies with FCC and ROHS standards.
FCCEROHS