XTOOL X100 PAD3 SE

Contents

XTOOL X100 PAD3 SE Car Key Programmer User Manual

Version 1.3 | 2026.09

1. General Introduction

The X100PAD 3 Auto Key Programmer, referred to as the "Programmer" throughout this document, is a professional key programming device based on the Android operating system. It supports multi-language switching and is suitable for different countries and regions. Please read this user manual carefully before using the device, paying attention to "Note" or "Caution" sections for appropriate operation.

Tablet Overview

The X100PAD3 SE features a robust design with various ports and components for comprehensive vehicle diagnostics and key programming.

XTOOL X100 PAD3 SE device overview with labeled ports and components
Figure 1: X100 PAD3 SE Device Overview, highlighting its physical features and ports.
Device Components
No. Component No. Component
① Type-C Port ② DB15 Port
③ Reset Hole ④ Power Button
⑤ Microphone ⑥ Camera
⑦ Holder ⑧ Speaker
⑨ Nameplate

2. Setup and Initial Use

2.1 Unboxing and Components

The XTOOL X100 PAD3 SE comes in a protective case containing the main unit and various accessories. Ensure all components are present upon unboxing.

Video: XTOOL X100 PAD3 SE Unboxing and Components Overview. This video demonstrates the contents of the product package and how to handle the device and its accessories.
XTOOL X100 PAD3 SE Package Contents including main unit, cables, and adapters
Figure 2: Detailed view of the X100 PAD3 SE package contents, including the main unit, cables, adapters, and documentation.

2.2 Initial Activation and Software Update

Before first use, the device needs to be activated and its software updated. This process requires an internet connection.

  1. Select Language: Upon powering on, select your preferred language from the initial setup screen.
  2. Connect to Network: Connect the device to a stable Wi-Fi network.
  3. Activate Device: Fill in your email address to activate the device.
  4. Update Software: Navigate to the "Updates" section within the Diagnostic application. The device will list all available software packages. Click "Update All" to download and install the latest software.
XTOOL X100 PAD3 SE Activation and Update Process showing language selection, network connection, and update screen
Figure 3: Screenshot showing the activation and update interface on the X100 PAD3 SE.

Note: If you change the language configuration after contacting XTOOL Support, you will need to download all software packages on the device again.

3. Operating Instructions

3.1 Safety Precautions

  • Keep the device away from heat or fumes when in use.
  • If the vehicle battery contains acid, keep your hands and skin or fire sources away from the battery during testing.
  • The exhaust gas of the vehicle contains harmful chemicals. Ensure adequate ventilation.
  • Do not touch the vehicle cooling system components or exhaust manifolds when the engine is running due to high temperatures.
  • Make sure the car is securely parked, Neutral is selected, or the selector is at the P or N position to prevent the vehicle from moving when the engine starts.
  • Make sure the (DLC) Diagnostic Link Connector is functioning properly before starting the test to avoid damage to the Diagnostic Computer.
  • Do not switch off the power or unplug the connectors during testing. Doing so may damage the ECU (Electronic Control Unit) and/or the Diagnostic Computer.

3.2 Key Programming and IMMO Functions

The X100 PAD3 SE offers extensive Immobilizer (IMMO) and key programming capabilities. These functions allow for adding new keys, managing lost keys, and performing various IMMO-related tasks.

XTOOL X100 PAD3 SE All-in-one IMMO & Key Programming interface
Figure 4: Overview of IMMO and Key Programming functions, including adding new keys, key copying, and reading PIN codes.
  • New Keys Programming: Add new transponder/smart keys and remote controllers.
  • Read PIN Code: Retrieve PIN codes via OBD or with EEPROM adapter.
  • All Key Lost: Procedures for situations where all keys are lost, including reading PIN/CS.
  • Key Learning/Matching: Match new keys to the vehicle's immobilizer system.
  • IMMO ECU Reset/Coding: Reset or code the Immobilizer Electronic Control Unit.
  • IMMO Data Backup/Restore: Backup and restore immobilizer data.
  • Remote Frequency Detection: Detect the frequency of remote keys.
  • Specialized Key Programming:
    • For BMW CAS4/3/2/1 Key Learning.
    • For VW, Audi, Skoda, Seat, Bentley 4th, 5th, MQB IMMO.
    • For Toyota & Lexus dealer key and all key lost (with KS-1).
    • For Mitsubishi dealer key (no KS-2 needed).
    • For Mercedes Infrared Keys all key lost (with M821).
    • For Toyota 8A/4A Chip Smart key all key lost (with M822).
    • For 2013-2022 Toyota/Lexus models with 8A/4A chip smart keys.

3.3 ECU Coding and Configuration

The ECU Coding function allows for re-flashing vehicle control modules, updating software, and reprogramming adaptive data. This can resolve issues related to drivability, fuel efficiency, power loss, and fault codes.

XTOOL X100 PAD3 SE ECU Coding & Configuration interface with online and offline coding options
Figure 5: Interface for ECU Coding and Configuration, showing options for online and offline coding.
  • Online Coding: For Benz, BMW, Jaguar, Land Rover.
  • Offline Coding: For VW, Mitsubishi, Benz.
  • ECU Configuration: Flash high-level functions, disable annoying features, customize car settings for Toyota, BMW, VW, Audi, Ford, Lexus, Scion, Mazda, Skoda.
  • Ford/Mazda Offline ECU Programming: Update ECU software/firmware, program new modules, fix software-driven fault codes, emission, and drivability issues. (Note: Not available for all makes & modules).

3.4 OE-Level Full Systems Diagnostics

The X100 PAD3 SE provides comprehensive diagnostic capabilities for all available vehicle systems.

XTOOL X100 PAD3 SE OE-Level Full Systems Diagnostic interface showing various diagnostic functions
Figure 6: Diagnostic functions overview, including Read Code, Clear Code, Read Live Data, Read Freeze Frame, and Read ECU Information.
  • Read Codes: Retrieve manufacturer-specific, pending, and permanent diagnostic trouble codes (DTCs).
  • Clear Codes: Erase DTCs, reset monitors, and turn off warning lights.
  • Live Data: View real-time data streams from various sensors (e.g., misfire, engine RPM, transmission fluid temperature).
  • Freeze Frame: Capture vehicle parameters at the moment a DTC is recorded for better diagnostics.
  • Auto VIN & Auto Scan: Automatically detect and decode the vehicle VIN number for efficient all systems scan.
  • CAN FD Protocol Support: For diagnosing ECU systems of cars meeting with CAN FD protocol.

3.5 Bi-Directional Control (Active Tests)

This function allows the diagnostic scanner to send commands to vehicle components and subsystems to perform active tests, helping to identify faulty components more efficiently.

XTOOL X100 PAD3 SE Bi-Directional Control interface showing various active tests like radiator fan, injector, mirror, brakes, doors, and sound horn tests
Figure 7: Examples of Bi-Directional Control tests, including radiator fan, injector, mirror, brakes, doors, and sound horn tests.

Examples of active tests include controlling A/C Clutch, Fuel Injectors, ABS Pump Motor, Solenoid Valves, Relays, Interior Lighting, Window, Door, Sunroof, and Car Wipers.

3.6 Special Functions (38+ Services)

The X100 PAD3 SE includes over 38 common service options and hundreds of resets, relearns, adaptations, matchings, initializations, and calibrations.

XTOOL X100 PAD3 SE 38+ Hot Maintenance Services overview with icons for IMMO, EPB, SAS, DPF, BMS Reset, Oil Light, TPMS Reset, and Instrument Cluster
Figure 8: Overview of 38+ maintenance services, including IMMO, EPB, SAS, DPF, BMS Reset, Oil Light, TPMS Reset, and Instrument Cluster.
  • Oil Reset: Reset engine oil life system.
  • EPB Reset: Maintain electronic braking system.
  • SAS Calibration: Calibrate Steering Angle Sensor.
  • BMS Reset: Register new car battery.
  • Injector Coding: Code new injectors.
  • ABS Bleed: Bleed air from ABS system.
  • EEPROM Adapter: Read EEPROM data when OBD is unavailable.
  • Other services include A/C Relearn, HV Battery, VGT, EGR, TPMS Reset, Cylinder, Throttle, Electronic Pump Activation, Gear Learning, Windows Initialization, Seat Calibration, Gearbox Match, Tire Upgrade, Transport Mode, Headlight, EPS, DPF, Suspension, Airbag Reset, etc.

Note: Service & Resets do NOT work on all cars. Please verify compatibility with your vehicle's VIN, make, model, and year.

4. Maintenance

4.1 General Cautions

  • Avoid shaking, dropping, or dismantling the Programmer as it may damage internal components.
  • Use only your fingertips to touch the LCD screen. Hard or sharp objects may damage the Programmer.
  • Do not use excessive force.
  • Do not expose the screen to strong sunlight for a long period.
  • Keep the Programmer away from water and moisture.
  • Store and use the Programmer only within the temperature ranges identified in the Technical Specifications section.
  • Keep the unit away from strong magnetic fields.

4.2 Software Updates

Regular software updates are crucial for maintaining optimal performance, adding new functionalities, and ensuring compatibility with newer vehicle models. The device supports one-click Wi-Fi updates.

  • Connect the device to a stable Wi-Fi network.
  • Navigate to the "Updates" section within the Diagnostic application.
  • Select "Update All" to download and install the latest software.

Note: The device comes with 2 years of free software updates. After this period, updates will require a subscription.

5. Troubleshooting

5.1 Common Issues and Solutions

Troubleshooting Guide
Issue Possible Cause Solution
Device not powering on Low battery, faulty charger, power button issue. Charge the device fully. Check charger and cable. Press and hold the power button for 10 seconds.
Cannot connect to Wi-Fi Incorrect password, weak signal, router issue. Verify Wi-Fi password. Move closer to the router. Restart router.
Software update failure Unstable internet connection, insufficient storage. Ensure stable Wi-Fi. Clear some storage if needed. Try updating again.
Device unresponsive / frozen Software glitch, temporary system error. Use the Reset Hole (③) to perform a soft reset.
Language change requires re-downloading software System design for multi-language support. This is expected behavior. Re-download all software packages after changing language.

5.2 Factory Reset

If the device experiences persistent issues, a factory reset can restore it to its original settings. This will erase all custom settings and data.

  1. From the main home page, click on the "Settings" mode.
  2. Select "Backup & reset".
  3. Follow the on-screen prompts to initiate the factory reset process.
  4. After the reset, the device will restart, and you will need to select the language again.

Caution: When the subscription expires, the software installed on your device is still available, but all updates will be invalid. If you delete specific software due to personal operation, XTOOL is not responsible for supporting the restoration of the software when the subscription expires.

6. Specifications

Technical Specifications
Feature Detail
Model Name XTOOL X100 Pad3 SE
Hardware Version 2026
Software Version Latest
Operating System Android 5.1 OS
Processor Quad-Core 1.8Ghz
Memory 2GB RAM, 64 GB ROM
Display 8 inches LED Compatible Touch Screen
Resolution 1024*768
Battery 10000mAh 3.7V Lithium Polymer Battery
Wireless Support Wifi (2.4Ghz and 5Ghz)
Voltage 12V
Item Weight 4.02kg
Item Dimensions (L x W x H) 40cm x 31cm x 13cm
Certification CE, ce
Item Type Auto Key Programmer

6.1 Vehicle Coverage

The X100 PAD3 SE supports over 85 vehicle brands and 10,000+ models, covering a wide range of vehicles from 1996 to 2025.

XTOOL X100 PAD3 SE Worldwide Vehicle Coverage map showing supported regions and car brands
Figure 9: Visual representation of worldwide vehicle coverage, including America, Europe, and Asia.
  • Asia: Toyota, Lexus, Honda, Acura, Mazda, Nissan, Infiniti, Mitsubishi, Subaru, Suzuki, Kia, Hyundai, Daewoo, SSANGYONG, Proton, etc.
  • Europe: Audi, VW, Skoda, Seat, Porsche, Opel, Citroen, Peugeot, Jaguar, Land Rover, Lincoln, Renault, etc.
  • America: GM, Cadillac, Buick, Chrysler, Ford, etc.
  • China: Great Wall, Chery, Brilliance-auto, Geely, LIFAN, HAFEI, CHANGAN, LANDWIND, BYD, JAC, etc.
  • Regional Support: For LADA and Russian Renault; For Brazil Renault, BR VW, BR GM, BR Chevrolet, BR Ford, and more Brazil car models; For Perodua and Proton Malaysia car models; For Renault Megane III with France Car models.

Note: Not all functions are supported on all car models. Please contact support to check compatibility for specific car models and years.

6.2 Supported Languages

The device supports 22 languages:

English, Spanish, French, German, Polish, Portuguese, Russian, Danish, Greek, Finnish, Hungarian, Italian, Japanese, Korean, Dutch, Norwegian, Swedish, Thai, Arabic, Turkish, Vietnamese, Traditional Chinese.

7. Warranty & Support

  • Warranty: 2 Years
  • Software Update: 2 Years Free Online Update
  • Technical Support: Available and Timely, 24/7 Online Support
  • Quality: 100% Original

7.1 Contact Information

For technical support or inquiries, please contact XTOOL:

  • E-Mail: supporting@xtooltech.com
  • Tel: +86 755 21670995 or +86 755 86267858 (China)
  • Official Website: www.xtooltech.com

8. User Tips

  • When changing the device language, remember to re-download all software packages to ensure full functionality in the new language.
  • Keep your device's software updated regularly to benefit from new features, improved vehicle coverage, and bug fixes.
  • Always verify vehicle compatibility for specific functions (e.g., key programming, special services) by providing your car's VIN, make, model, and year to XTOOL support.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.