1. Product Overview
The EZAIOT V9BW is a battery-powered smart thermostat designed for wall-hung boilers. It supports 7-day scheduling with up to 6 temperature events per day and can be controlled via a mobile app through Wi-Fi or Zigbee. Its compact design and intuitive operation make it ideal for home heating control.
2. Setup Instructions
2.1. Preparation
- Tools Required: A flat-head screwdriver.
- Batteries: Ensure you have 3 new LR6/AA (1.5V) alkaline batteries.
- Important Notice: Keep this product away from children to avoid any possible danger.
2.2. Physical Installation
- Open the Thermostat Base: Use a flat-head screwdriver to insert into the slot at the bottom of the thermostat. Apply force to pry open the connection between the base and the panel.
- Mount the Base: Secure the base to the wall box using screws. Ensure the side with the black component faces upward. Note the two circular holes for screw placement.
- Wiring: Connect the two dry contact wires of your gas boiler correctly into the base according to the diagram below. There are two methods:
- Surface-mounted: Loosen the two screws on the base, connect the wires to the corresponding terminals, tighten the screws, and tuck the wires into the two slots, leading them out from the top.
- Flush-mounted: Pass the wires through the square hole on the back of the base. Loosen the screws, connect the wires to the corresponding terminals, and tighten them.
Note:
- The thermostat operates at full capacity below 2500 meters (8202 feet).
- Between 2500 and 4200 meters (8202 to 13779 feet), external load power should not exceed 80% of the thermostat's rated power.
- Install Batteries: Insert 3 LR6/AA (1.5V) alkaline batteries, ensuring the positive and negative poles match the symbols indicated in the battery compartment.
- Attach the Thermostat Body: Align and confirm the position of the device buckle, then snap the main unit into place.
- Complete Installation: Align the blank panel frame with the clips and close the panel.
2.3. Device Connection (Smart Life App)
- Download the Smart Life App: Scan the QR code provided in the manual or search for "Smart Life" in your device's App Store or Google Play. Install the app and log in to your account.
- Enter Network Setup Mode:
- Briefly press the Power Switch button to turn off the thermostat.
- Then, press and hold the Power Switch button for more than 3 seconds to enter APP Network Setup Mode.
- Reminder: Make sure the thermostat is in Network Setup Mode (Wi-Fi icon is lit up steadily) before pairing it with the app.
- Add Device: Open the Smart Life app and tap the '+' icon in the top right corner to add a new device. Select your 2.4GHz Wi-Fi network, enter your Wi-Fi password, and ensure the thermostat is in pairing mode. Tap "Add Discovered Device" and wait for the connection to complete.
- Once successfully connected, you can control the thermostat via the app.
3. Operating Instructions
3.1. Basic Operations
- Power Switch: Tap the power button to turn the device on or off.
- Temperature Adjustment: Tap the 'down' arrow to lower the set temperature or the 'up' arrow to raise it. Adjustments are in 0.5°C increments.
- Mode Switching: Press the '88' button to switch between "Manual", "Auto", and "ECO" modes. The "Auto" mode enables daily programming.
- Child Lock: Press and hold both the 'down' and 'up' buttons simultaneously for 3 seconds to enable or disable the child lock.
3.2. Daily Programming
The thermostat supports 7-day scheduling, allowing users to set up to 6 temperature events per day for each day of the week (Monday to Sunday). This schedule can be easily configured and adjusted via the mobile app, enabling personalized comfort and energy efficiency throughout the week.
Note:
- The Auto mode becomes available only after completing Wi-Fi network configuration, as the scheduling feature requires accurate time data retrieved via the internet.
3.3. Temporary Override Mode
While in Auto Mode, if you manually adjust the set temperature by pressing the 'down' and 'up' buttons, the thermostat will enter Temporary Override Mode.
Note:
- The adjusted temperature will remain in effect only during the current time period.
- Once the time period ends, the thermostat will automatically return to the Daily Programming schedule (Auto mode), without affecting any preset values.
3.4. Voice Control
The thermostat is compatible with Amazon Alexa and Google Assistant for voice control. Examples of commands include:
- Amazon Alexa: "Alexa, Open the DEVICE NAME", "Make the DEVICE NAME colder", "What temperature is the DEVICE NAME set to?"
- Google Assistant: "OK Google, Open the DEVICE NAME", "Set the DEVICE NAME to 26 degrees", "Raise the DEVICE NAME by 1 degree"
Note:
- "DEVICE NAME" refers to the name you have assigned to your thermostat in the Smart Life app.
- The temperature units for the device and the smart speaker must be consistent.
4. Maintenance
4.1. Low Battery Warning
When the battery level drops below 20%, the battery icon on the display will flash continuously to remind the user to replace the batteries.
Note:
- Please replace all 3 AA batteries promptly when the low battery warning appears.
4.2. Factory Restore
To restore the device to its original factory settings:
- When the device is OFF, press and hold both the '88' and 'down' buttons for 5 seconds.
- The thermostat will reset to its original factory configuration. All user settings, including schedules and Wi-Fi configuration, will be erased after the reset.
5. Troubleshooting
The thermostat displays error codes to indicate specific issues:
| Error Code | Problem | Solution |
|---|---|---|
| ER1 | Built-in temperature sensor malfunction | Please contact customer support. |
| ERS | Low battery power (The low battery icon will flash continuously) | Replace all 3 AA batteries. |
6. Technical Specifications
| Name | Specifications |
|---|---|
| Power Supply Voltage | 3 x LR6/AA (1.5V) Alkaline Batteries |
| Temperature Setting Range | 5-40°C |
| Temperature Control Accuracy | 0.5°C |
| Temperature Hysteresis | 0.1-10°C (Factory setting 0.5°C) |
| Ambient Temperature | -5~50°C |
| Wi-Fi | Wi-Fi 6 (802.11ax), backward compatible 802.11b/g/n (2.4 GHZ) |
| Wi-Fi Range | Indoors 30 m (varies by environment) |
| Protection Rating | IP20 |
| Housing Material | Flame-retardant PC+ABS |
| Dimensions (WxHxD) | 86 mm x 86 mm x 25.1 mm |
| Wattage | 1W |
| Certification | CE, RoHS |
| Origin | Mainland China |
| Upgrade | Daily Programming |
7. User Tips
- Temperature Hysteresis: The thermostat offers adjustable hysteresis down to 0.1°C, allowing for very precise temperature control and smaller temperature fluctuations for increased comfort.
- Battery Life: Users have reported good battery life, with some noting 100% battery remaining after a month of use.
- Display Visibility: The display turns off after a few seconds to conserve battery. If constant illumination is desired, this model may not be suitable.
- Loud Beeps: The touch controls produce an audible beep. There is currently no option to adjust the volume of these beeps.
- Home Assistant/Zigbee2MQTT Integration: The Zigbee version of the thermostat works effectively with Home Assistant and Zigbee2MQTT for advanced smart home setups.
- Boiler Connection: The thermostat connects to the boiler via 2 wires with potential-free screw contacts and can be configured as Normally Open (NO) or Normally Closed (NC) from the application.
8. Warranty and Support
For any technical assistance, warranty claims, or further inquiries, please contact the seller or refer to the comprehensive user manual available in PDF format. The PDF manual provides additional detailed instructions and diagrams.
You can access the full user manual here: EZAIOT V9BW User Manual (PDF)