1. Introduction
Thank you for choosing the LANXSTAR 18V 3 Inch Mini Angle Grinder. This cordless electric power tool is designed for a variety of tasks including cutting, grinding, polishing, and joint cleaning. Its compact and lightweight design ensures ease of use and maneuverability. This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your new tool. Please read it thoroughly before first use and keep it for future reference.
2. Safety Instructions
Always follow basic safety precautions to reduce the risk of fire, electric shock, and personal injury when using power tools. Keep this manual for future reference.
General Safety Warnings:
- Always wear eye protection and hearing protection.
- Wear appropriate clothing; avoid loose clothing or jewelry that can get caught in moving parts.
- Ensure the workpiece is securely clamped or held.
- Keep hands clear of the cutting/grinding disc.
- Do not operate the tool in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
- Keep children and bystanders away while operating a power tool.
- Disconnect the battery pack from the tool before making any adjustments, changing accessories, or storing the tool.
- Use only accessories specifically designed for this angle grinder.
- Maintain the tool with care. Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the tool’s operation.
FCC Compliance Statement:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
WARNING: Keep away from children. CHOKING HAZARD - Small parts not suitable for children under 3 years or any individual with a tendency to put inedible objects in their mouth.
3. Product Overview
Familiarize yourself with the components of your Mini Angle Grinder:
- Protective Cover: Shields against sparks and debris.
- Heat Dissipation Vents: Ensures rapid cooling of the motor.
- Power Switch: Activates and deactivates the tool.
- Forward/Reverse Switch: Changes the direction of rotation (if applicable for specific accessories).
- Ergonomic Handle: Provides a comfortable and secure grip.
- Smart Display: (Specific functions not detailed, typically indicates battery level or speed setting).
- Spindle Lock Switch: Used for securing the spindle during accessory changes.
4. Setup
4.1 Battery Installation
This angle grinder is compatible with 18V Makita and DeWei style batteries (battery not included). Ensure the battery is fully charged before use.
- Align the battery pack with the battery port on the base of the grinder.
- Slide the battery pack into place until it clicks securely.
- To remove, press the battery release button and slide the battery out.
4.2 Installing/Replacing Accessories (Discs/Blades)
- Ensure the battery is removed from the tool.
- Press and hold the Spindle Lock Switch to prevent the spindle from rotating.
- Use an Allen key (not included) to loosen and remove the clamping plate/flange nut.
- Place the desired cutting, grinding, or polishing disc onto the spindle, ensuring it is correctly seated.
- Re-attach the clamping plate/flange nut and tighten it securely with the Allen key while holding the Spindle Lock Switch.
- Release the Spindle Lock Switch.
4.3 Adjusting the Protective Cover
The protective cover can be adjusted 90° without tools to suit your working angle and provide optimal protection.
- Ensure the tool is off and the battery is removed.
- Grasp the protective cover and rotate it to the desired position.
- Ensure it is securely in place before operating the tool.
5. Operating Instructions
- Ensure the battery is securely installed and the desired accessory and protective cover are correctly positioned.
- Hold the tool firmly with both hands (if applicable, or a single-handed grip for lightweight tasks).
- Press the Power Switch to start the tool.
- Allow the disc to reach full speed before making contact with the workpiece.
- Apply gentle, even pressure. Do not force the tool, let the disc do the work.
- For cutting, use the edge of the disc. For grinding/polishing, use the face of the disc.
- The Forward/Reverse switch can be used to change the direction of rotation if required by the specific accessory or task.
- Monitor the Smart Display for any indicators (e.g., battery level).
- After completing the task, release the Power Switch and allow the disc to stop completely before setting the tool down.
Applications:
- Cutting: Suitable for various materials like metal, tile, and plastic with appropriate cutting discs.
- Grinding: Ideal for smoothing rough surfaces, removing excess material, or sharpening.
- Polishing: Achieves a smooth, shiny finish on surfaces using polishing pads.
- Joint Cleaning: Can be used for cleaning welds or joints with specialized brushes.
6. Maintenance
- Cleaning: Regularly clean the tool, especially the heat dissipation vents, to prevent dust and debris buildup. Use a soft, dry cloth. Do not use water or chemical cleaners.
- Inspection: Periodically inspect the power cord (if applicable), switches, and protective cover for any damage. Check accessories for wear and replace them as needed.
- Motor: The tool features a solid copper wire motor designed for high-temperature resistance and rapid heat dissipation, ensuring robust power output and longevity.
- Storage: Store the tool in a dry, secure place out of reach of children. Remove the battery pack before storing for extended periods.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Tool does not start | Battery not charged or improperly installed; Power switch faulty. | Ensure battery is charged and correctly inserted. Check power switch for damage. |
| Reduced performance/power | Low battery charge; Worn or incorrect accessory; Overheating. | Recharge battery. Replace worn accessories. Allow tool to cool down. |
| Excessive vibration | Accessory improperly installed or damaged; Spindle bent. | Re-install or replace accessory. If spindle is bent, seek professional repair. |
| Tool stops during operation | Overload protection activated; Low battery. | Reduce load on the tool. Recharge battery. |
8. Specifications
| Feature | Specification |
|---|---|
| Product Name | Mini Angle Grinder |
| Model | QGJ-LD18V-MT |
| Brand Name | LANXSTAR |
| Type | Angle Grinder |
| Power Source | Electricity (Cordless, 18V Battery Compatible) |
| Battery Included | No |
| Certification | NONE (FCC Compliant) |
| Origin | Mainland China |
| Package Length | 27 cm |
| Package Width | 15 cm |
| Package Height | 11 cm |
| Package Weight | 0.875 kg |
9. User Tips
- Always choose the correct disc or accessory for the material and task at hand.
- For prolonged use, ensure you take breaks to prevent fatigue and allow the tool to cool down.
- Keep your work area clean and well-lit to prevent accidents.
- When cutting, make shallow passes rather than trying to cut through thick material in one go.
- Regularly check the battery charge level, especially when working on larger projects.
10. Warranty and Support
For any questions, technical support, or warranty claims, please contact the manufacturer directly.
- Manufacturer: LANXSTAR
- Address: A302, Building 25, Hong Chao Yuan, ChangFa Mid Road, BanTian Subdistrict, LongGang District, ShenZhen, China
- Email: 56827370@qq.com
- Telephone: 86-15089309815
An official user manual in PDF format is also available for download. Please refer to the seller's product page for the link or contact support for assistance: View User Manual (PDF)